Improving the Performance and Energy Efficiency of GPGPU Computing through Adaptive Cache and Memory Management Techniques

Department of Computer Science and EngineeringAs the performance and energy efficiency requirement of GPGPUs have risen, memory management techniques of GPGPUs have improved to meet the requirements by employing hardware caches and utilizing heterogeneous memory. These techniques can improve GPGPUs by providing lower latency and higher bandwidth of the memory. However, these methods do not always guarantee improved performance and energy efficiency due to the small cache size and heterogeneity of the memory nodes. While prior works have proposed various techniques to address this issue, relatively little work has been done to investigate holistic support for memory management techniques. In this dissertation, we analyze performance pathologies and propose various techniques to improve memory management techniques. First, we investigate the effectiveness of advanced cache indexing (ACI) for high-performance and energy-efficient GPGPU computing. Specifically, we discuss the designs of various static and adaptive cache indexing schemes and present implementation for GPGPUs. We then quantify and analyze the effectiveness of the ACI schemes based on a cycle-accurate GPGPU simulator. Our quantitative evaluation shows that ACI schemes achieve significant performance and energy-efficiency gains over baseline conventional indexing scheme. We also analyze the performance sensitivity of ACI to key architectural parameters (i.e., capacity, associativity, and ICN bandwidth) and the cache indexing latency. We also demonstrate that ACI continues to achieve high performance in various settings. Second, we propose IACM, integrated adaptive cache management for high-performance and energy-efficient GPGPU computing. Based on the performance pathology analysis of GPGPUs, we integrate state-of-the-art adaptive cache management techniques (i.e., cache indexing, bypassing, and warp limiting) in a unified architectural framework to eliminate performance pathologies. Our quantitative evaluation demonstrates that IACM significantly improves the performance and energy efficiency of various GPGPU workloads over the baseline architecture (i.e., 98.1% and 61.9% on average, respectively) and achieves considerably higher performance than the state-of-the-art technique (i.e., 361.4% at maximum and 7.7% on average). Furthermore, IACM delivers significant performance and energy efficiency gains over the baseline GPGPU architecture even when enhanced with advanced architectural technologies (e.g., higher capacity, associativity). Third, we propose bandwidth- and latency-aware page placement (BLPP) for GPGPUs with heterogeneous memory. BLPP analyzes the characteristics of a application and determines the optimal page allocation ratio between the GPU and CPU memory. Based on the optimal page allocation ratio, BLPP dynamically allocate pages across the heterogeneous memory nodes. Our experimental results show that BLPP considerably outperforms the baseline and state-of-the-art technique (i.e., 13.4% and 16.7%) and performs similar to the static-best version (i.e., 1.2% difference), which requires extensive offline profiling.clos

FASTCUDA: Open Source FPGA Accelerator & Hardware-Software Codesign Toolset for CUDA Kernels

Using FPGAs as hardware accelerators that communicate with a central CPU is becoming a common practice in the embedded design world but there is no standard methodology and toolset to facilitate this path yet. On the other hand, languages such as CUDA and OpenCL provide standard development environments for Graphical Processing Unit (GPU) programming. FASTCUDA is a platform that provides the necessary software toolset, hardware architecture, and design methodology to efficiently adapt the CUDA approach into a new FPGA design flow. With FASTCUDA, the CUDA kernels of a CUDA-based application are partitioned into two groups with minimal user intervention: those that are compiled and executed in parallel software, and those that are synthesized and implemented in hardware. A modern low power FPGA can provide the processing power (via numerous embedded micro-CPUs) and the logic capacity for both the software and hardware implementations of the CUDA kernels. This paper describes the system requirements and the architectural decisions behind the FASTCUDA approach

Simplified vector-thread architectures for flexible and efficient data-parallel accelerators

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2010.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Cataloged from student submitted PDF version of thesis.Includes bibliographical references (p. 165-170).This thesis explores a new approach to building data-parallel accelerators that is based on simplifying the instruction set, microarchitecture, and programming methodology for a vector-thread architecture. The thesis begins by categorizing regular and irregular data-level parallelism (DLP), before presenting several architectural design patterns for data-parallel accelerators including the multiple-instruction multiple-data (MIMD) pattern, the vector single-instruction multiple-data (vector-SIMD) pattern, the single-instruction multiple-thread (SIMT) pattern, and the vector-thread (VT) pattern. Our recently proposed VT pattern includes many control threads that each manage their own array of microthreads. The control thread uses vector memory instructions to efficiently move data and vector fetch instructions to broadcast scalar instructions to all microthreads. These vector mechanisms are complemented by the ability for each microthread to direct its own control flow. In this thesis, I introduce various techniques for building simplified instances of the VT pattern. I propose unifying the VT control-thread and microthread scalar instruction sets to simplify the microarchitecture and programming methodology. I propose a new single-lane VT microarchitecture based on minimal changes to the vector-SIMD pattern.(cont.) Single-lane cores are simpler to implement than multi-lane cores and can achieve similar energy efficiency. This new microarchitecture uses control processor embedding to mitigate the area overhead of single-lane cores, and uses vector fragments to more efficiently handle both regular and irregular DLP as compared to previous VT architectures. I also propose an explicitly data-parallel VT programming methodology that is based on a slightly modified scalar compiler. This methodology is easier to use than assembly programming, yet simpler to implement than an automatically vectorizing compiler. To evaluate these ideas, we have begun implementing the Maven data-parallel accelerator. This thesis compares a simplified Maven VT core to MIMD, vector-SIMD, and SIMT cores. We have implemented these cores with an ASIC methodology, and I use the resulting gate-level models to evaluate the area, performance, and energy of several compiled microbenchmarks. This work is the first detailed quantitative comparison of the VT pattern to other patterns. My results suggest that future data-parallel accelerators based on simplified VT architectures should be able to combine the energy efficiency of vector-SIMD accelerators with the flexibility of MIMD accelerators.by Christopher Francis Batten.Ph.D

High-Efficient Parallel CAVLC Encoders on Heterogeneous Multicore Architectures

This article presents two high-efficient parallel realizations of the context-based adaptive variable length coding (CAVLC) based on heterogeneous multicore processors. By optimizing the architecture of the CAVLC encoder, three kinds of dependences are eliminated or weaken, including the context-based data dependence, the memory accessing dependence and the control dependence. The CAVLC pipeline is divided into three stages: two scans, coding, and lag packing, and be implemented on two typical heterogeneous multicore architectures. One is a block-based SIMD parallel CAVLC encoder on multicore stream processor STORM. The other is a component-oriented SIMT parallel encoder on massively parallel architecture GPU. Both of them exploited rich data-level parallelism. Experiments results show that compared with the CPU version, more than 70 times of speedup can be obtained for STORM and over 50 times for GPU. The implementation of encoder on STORM can make a real-time processing for 1080p @30fps and GPU-based version can satisfy the requirements for 720p real-time encoding. The throughput of the presented CAVLC encoders is more than 10 times higher than that of published software encoders on DSP and multicore platforms

Evaluating Cache Coherent Shared Virtual Memory for Heterogeneous Multicore Chips

The trend in industry is towards heterogeneous multicore processors (HMCs), including chips with CPUs and massively-threaded throughput-oriented processors (MTTOPs) such as GPUs. Although current homogeneous chips tightly couple the cores with cache-coherent shared virtual memory (CCSVM), this is not the communication paradigm used by any current HMC. In this paper, we present a CCSVM design for a CPU/MTTOP chip, as well as an extension of the pthreads programming model, called xthreads, for programming this HMC. Our goal is to evaluate the potential performance benefits of tightly coupling heterogeneous cores with CCSVM

Pathfinding Future PIM Architectures by Demystifying a Commercial PIM Technology

Processing-in-memory (PIM) has been explored for decades by computer architects, yet it has never seen the light of day in real-world products due to their high design overheads and lack of a killer application. With the advent of critical memory-intensive workloads, several commercial PIM technologies have been introduced to the market ranging from domain-specific PIM architectures to more general-purpose PIM architectures. In this work, we deepdive into UPMEM's commercial PIM technology, a general-purpose PIM-enabled parallel architecture that is highly programmable. Our first key contribution is the development of a flexible simulation framework for PIM. The simulator we developed (aka PIMulator) enables the compilation of UPMEM-PIM source codes into its compiled machine-level instructions, which are subsequently consumed by our cycle-level performance simulator. Using PIMulator, we demystify UPMEM's PIM design through a detailed characterization study. Building on top of our characterization, we conduct a series of case studies to pathfind important architectural features that we deem will be critical for future PIM architectures to suppor