New Fault Tolerant Multicast Routing Techniques to Enhance Distributed-Memory Systems Performance

Distributed-memory systems are a key to achieve high performance computing and the most favorable architectures used in advanced research problems. Mesh connected multicomputer are one of the most popular architectures that have been implemented in many distributed-memory systems. These systems must support communication operations efficiently to achieve good performance. The wormhole switching technique has been widely used in design of distributed-memory systems in which the packet is divided into small flits. Also, the multicast communication has been widely used in distributed-memory systems which is one source node sends the same message to several destination nodes. Fault tolerance refers to the ability of the system to operate correctly in the presence of faults. Development of fault tolerant multicast routing algorithms in 2D mesh networks is an important issue. This dissertation presents, new fault tolerant multicast routing algorithms for distributed-memory systems performance using wormhole routed 2D mesh. These algorithms are described for fault tolerant routing in 2D mesh networks, but it can also be extended to other topologies. These algorithms are a combination of a unicast-based multicast algorithm and tree-based multicast algorithms. These algorithms works effectively for the most commonly encountered faults in mesh networks, f-rings, f-chains and concave fault regions. It is shown that the proposed routing algorithms are effective even in the presence of a large number of fault regions and large size of fault region. These algorithms are proved to be deadlock-free. Also, the problem of fault regions overlap is solved. Four essential performance metrics in mesh networks will be considered and calculated; also these algorithms are a limited-global-information-based multicasting which is a compromise of local-information-based approach and global-information-based approach. Data mining is used to validate the results and to enlarge the sample. The proposed new multicast routing techniques are used to enhance the performance of distributed-memory systems. Simulation results are presented to demonstrate the efficiency of the proposed algorithms

Recursive Cube of Rings: A new topology for interconnection networks

In this paper, we introduce a family of scalable interconnection network topologies, named Recursive Cube of Rings (RCR), which are recursively constructed by adding ring edges to a cube. RCRs possess many desirable topological properties in building scalable parallel machines, such as fixed degree, small diameter, wide bisection width, symmetry, fault tolerance, etc. We first examine the topological properties of RCRs. We then present and analyze a general deadlock-free routing algorithm for RCRs. Using a complete binary tree embedded into an RCR with expansion-cost approximating to one, an efficient broadcast routing algorithm on RCRs is proposed. The upper bound of the number of message passing steps in one broadcast operation on a general RCR is also derived.published_or_final_versio

Analysis of wormhole routings in cayley graphs of permutation groups.

Over a decade, a new class of switching technology, called wormhole routing, has been investigated in the multicomputer interconnection network field. Several classes of wormhole routing algorithms have been proposed. Most of the algorithms have been centered on the traditional binary hypercube, k-ary n-cube mesh, and torus networks. In the design of a wormhole routing algorithm, deadlock avoidance scheme is the main concern. Recently, new classes of networks called Cayley graphs of permutation groups are considered very promising alternatives. Although proposed Cayley networks have superior topological properties over the traditional network topologies, the design of the deadlock-free wormhole routing algorithm in these networks is not simple. In this dissertation, we investigate deadlock free wormhole routing algorithms in the several classes of Cayley networks, such as complete-transposition and star networks. We evaluate several classes of routing algorithms on these networks, and compare the performance of each algorithm to the simulation study. Also, the performances of these networks are compared to the traditional networks. Through extensive simulation we found that adaptive algorithm outperformed deterministic algorithm in general with more virtual channels. On the network performance comparison, the complete transposition network showed the best performance among the similar sized networks, and the binary hypercube performed better compared to the star graph

On Near Optimal Time and Dynamic Delay and Delay Variation Multicast Algorithms

Multicast is one of the most prevalent communication modes in computer networks. A plethora of systems and applications today rely on multicast communication to disseminate traffic including but not limited to teleconferencing, videoconferencing, stock exchanges, supercomputers, software update distribution, distributed database systems, and gaming. This dissertation elaborates and addresses key research challenges and problems related to the design and implementation of multicast algorithms. In particular, it investigates the problems of (1) Designing near optimal multicast time algorithms for mesh and torus connected systems and (2) Designing efficient algorithms for Delay and Delay Variation Bounded Multicast (DVBM). To achieve the first goal, improvements on four tree based multicast algorithms are made: Modified PAIR (MPAIR), Modified DIAG (MDIAG), Modified MIN (MMIN), and Modified DIST (MDIST). The proof that MDIAG generates optimal or optimal plus one multicast time in 2-Dimensional (2D) mesh networks is provided. The hybrid version of MDIAG (HMDIAG) is designed, that gives a 3-additive approximation algorithm on multicast time in 2D torus networks. To make HMDIAG applicable on systems using higher dimensional meshes and tori, it is extended and the proof that it gives a (2n-1)-additive approximation algorithm on multicast time in nD torus networks is given. To address the second goal, Directional Core Selection (DCS) algorithm for core selection and DVBM Tree generation is designed. To further reduce the delay variation of trees generated by DCS, a k-shortest-path based algorithm, Build Lower Variation Tree (BLVT) is designed. To tackle dynamic join/leave requests to the ongoing multicast session, the dynamic version of both algorithms is given that responds to requests by reorganizing the tree and avoiding session disruption. To solve cases where single-core based algorithms fail to construct a DVBM tree, a dynamic three-phase algorithm, Multi-core DVBM Trees (MCDVBMT) is designed, that semi-matches group members to core nodes

Network-on-Chip

Addresses the Challenges Associated with System-on-Chip Integration Network-on-Chip: The Next Generation of System-on-Chip Integration examines the current issues restricting chip-on-chip communication efficiency, and explores Network-on-chip (NoC), a promising alternative that equips designers with the capability to produce a scalable, reusable, and high-performance communication backbone by allowing for the integration of a large number of cores on a single system-on-chip (SoC). This book provides a basic overview of topics associated with NoC-based design: communication infrastructure design, communication methodology, evaluation framework, and mapping of applications onto NoC. It details the design and evaluation of different proposed NoC structures, low-power techniques, signal integrity and reliability issues, application mapping, testing, and future trends. Utilizing examples of chips that have been implemented in industry and academia, this text presents the full architectural design of components verified through implementation in industrial CAD tools. It describes NoC research and developments, incorporates theoretical proofs strengthening the analysis procedures, and includes algorithms used in NoC design and synthesis. In addition, it considers other upcoming NoC issues, such as low-power NoC design, signal integrity issues, NoC testing, reconfiguration, synthesis, and 3-D NoC design. This text comprises 12 chapters and covers: The evolution of NoC from SoC—its research and developmental challenges NoC protocols, elaborating flow control, available network topologies, routing mechanisms, fault tolerance, quality-of-service support, and the design of network interfaces The router design strategies followed in NoCs The evaluation mechanism of NoC architectures The application mapping strategies followed in NoCs Low-power design techniques specifically followed in NoCs The signal integrity and reliability issues of NoC The details of NoC testing strategies reported so far The problem of synthesizing application-specific NoCs Reconfigurable NoC design issues Direction of future research and development in the field of NoC Network-on-Chip: The Next Generation of System-on-Chip Integration covers the basic topics, technology, and future trends relevant to NoC-based design, and can be used by engineers, students, and researchers and other industry professionals interested in computer architecture, embedded systems, and parallel/distributed systems

Architecting a One-to-many Traffic-Aware and Secure Millimeter-Wave Wireless Network-in-Package Interconnect for Multichip Systems

With the aggressive scaling of device geometries, the yield of complex Multi Core Single Chip(MCSC) systems with many cores will decrease due to the higher probability of manufacturing defects especially, in dies with a large area. Disintegration of large System-on-Chips(SoCs) into smaller chips called chiplets has shown to improve the yield and cost of complex systems. Therefore, platform-based computing modules such as embedded systems and micro-servers have already adopted Multi Core Multi Chip (MCMC) architectures overMCSC architectures. Due to the scaling of memory intensive parallel applications in such systems, data is more likely to be shared among various cores residing in different chips resulting in a significant increase in chip-to-chip traffic, especially one-to-many traffic. This one-to-many traffic is originated mainly to maintain cache-coherence between many cores residing in multiple chips. Besides, one-to-many traffics are also exploited by many parallel programming models, system-level synchronization mechanisms, and control signals. How-ever, state-of-the-art Network-on-Chip (NoC)-based wired interconnection architectures do not provide enough support as they handle such one-to-many traffic as multiple unicast trafficusing a multi-hop MCMC communication fabric. As a result, even a small portion of such one-to-many traffic can significantly reduce system performance as traditional NoC-basedinterconnect cannot mask the high latency and energy consumption caused by chip-to-chipwired I/Os. Moreover, with the increase in memory intensive applications and scaling of MCMC systems, traditional NoC-based wired interconnects fail to provide a scalable inter-connection solution required to support the increased cache-coherence and synchronization generated one-to-many traffic in future MCMC-based High-Performance Computing (HPC) nodes. Therefore, these computation and memory intensive MCMC systems need an energy-efficient, low latency, and scalable one-to-many (broadcast/multicast) traffic-aware interconnection infrastructure to ensure high-performance. Research in recent years has shown that Wireless Network-in-Package (WiNiP) architectures with CMOS compatible Millimeter-Wave (mm-wave) transceivers can provide a scalable, low latency, and energy-efficient interconnect solution for on and off-chip communication. In this dissertation, a one-to-many traffic-aware WiNiP interconnection architecture with a starvation-free hybrid Medium Access Control (MAC), an asymmetric topology, and a novel flow control has been proposed. The different components of the proposed architecture are individually one-to-many traffic-aware and as a system, they collaborate with each other to provide required support for one-to-many traffic communication in a MCMC environment. It has been shown that such interconnection architecture can reduce energy consumption and average packet latency by 46.96% and 47.08% respectively for MCMC systems. Despite providing performance enhancements, wireless channel, being an unguided medium, is vulnerable to various security attacks such as jamming induced Denial-of-Service (DoS), eavesdropping, and spoofing. Further, to minimize the time-to-market and design costs, modern SoCs often use Third Party IPs (3PIPs) from untrusted organizations. An adversary either at the foundry or at the 3PIP design house can introduce a malicious circuitry, to jeopardize an SoC. Such malicious circuitry is known as a Hardware Trojan (HT). An HTplanted in the WiNiP from a vulnerable design or manufacturing process can compromise a Wireless Interface (WI) to enable illegitimate transmission through the infected WI resulting in a potential DoS attack for other WIs in the MCMC system. Moreover, HTs can be used for various other malicious purposes, including battery exhaustion, functionality subversion, and information leakage. This information when leaked to a malicious external attackercan reveals important information regarding the application suites running on the system, thereby compromising the user profile. To address persistent jamming-based DoS attack in WiNiP, in this dissertation, a secure WiNiP interconnection architecture for MCMC systems has been proposed that re-uses the one-to-many traffic-aware MAC and existing Design for Testability (DFT) hardware along with Machine Learning (ML) approach. Furthermore, a novel Simulated Annealing (SA)-based routing obfuscation mechanism was also proposed toprotect against an HT-assisted novel traffic analysis attack. Simulation results show that,the ML classifiers can achieve an accuracy of 99.87% for DoS attack detection while SA-basedrouting obfuscation could reduce application detection accuracy to only 15% for HT-assistedtraffic analysis attack and hence, secure the WiNiP fabric from age-old and emerging attacks

Performance evaluation of different routing algorithms in network on chip

Network on Chip (NoC) is one of the efficient on-chip communication architecture for System on Chip (SoC) where a large number of computational and storage blocks are integrated on a single chip. NoCs have tackled the disadvantages of SoCs as well as they are scalable. But an efficient routing algorithm can enhance the performance of NoC. In one chapter of the thesis three different types of routing algorithms are compared i.e. XY, OE, and DyAD. XY routing algorithm is a distributed deterministic algorithm. Odd-Even (OE) routing algorithm is distributed adaptive routing algorithm with deadlock-free ability. DyAD is a smart routing algorithm which combines the features of both deterministic and adaptive routing. In another chapter of thesis three different types of deadlock free routing algorithms are compared i.e. one deterministic routing (XY routing algorithm), three partially adaptive routing (West first, North last and Negative first) and two adaptive routing (DyXY, OE) are being compared with % of load for various traffic patterns. In another chapter of thesis, a fault tolerant algorithm is described and its performance is compared with all the deadlock free routing algorithms in a NoC having link faults and node faults. All these simulation is done in NIRGAM 2.1 simulator which is a cycle accurate systemC based simulator

Efficient techniques to provide scalability for token-based cache coherence protocols

Cache coherence protocols based on tokens can provide low latency without relying on non-scalable interconnects thanks to the use of efficient requests that are unordered. However, when these unordered requests contend for the same memory block, they may cause protocols races. To resolve the races and ensure the completion of all the cache misses, token protocols use a starvation prevention mechanism that is inefficient and non-scalable in terms of required storage structures and generated traffic. Besides, token protocols use non-silent invalidations which increase the latency of write misses proportionally to the system size. All these problems make token protocols non-scalable. To overcome the main problems of token protocols and increase their scalability, we propose a new starvation prevention mechanism named Priority Requests. This mechanism resolves contention by an efficient, elegant, and flexible method based on ordered requests. Furthermore, thanks to Priority Requests, efficient techniques can be applied to limit the storage requirements of the starvation prevention mechanism, to reduce the total traffic generated for managing protocol races, and to reduce the latency of write misses. Thus, the main problems of token protocols can be solved, which, in turn, contributes to wide their efficiency and scalability.Cuesta Sáez, BA. (2009). Efficient techniques to provide scalability for token-based cache coherence protocols [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/6024Palanci

On chip implement of deadlock avoidance in wormhole networks

This thesis gives a detailed description of the Application Specific Integrated Circuit (ASIC) design to avoid deadlocks in Wormhole Networks. Deadlock avoidance is the most critical issue while considering wormhole networks and should be avoided by any routing protocol and algorithm. A novel architecture for the Turn Prohibition Based Routing (TPBR) protocol has been proved to be efficient and was developed as a part of this work. This architecture for implementing the algorithm is divided into three parts. The first part determines the order of selccuon of the nodes, in the network to run the algorithm. The second part deals with the prohibition of the turns through the node which might possibly create a deadlock. The third part constructs a routing table, which will have the route from a source to a destination, considering the prohibited, turns into account. A VHDL model was developed and simulated using IEEE numeric-std package for this architecture. This model was synthesized with Cadence tools and the post synthesis simulations verified the functionality of the architecture. The physical design was created using the standard gate cell libraries and implemented in 0.35-micron CMOS technology