A Combined Routing Method for Wireless Ad Hoc Networks

To make ad hoc wireless networks adaptive to different mobility and traffic patterns, this paper proposes an approach to swap from one protocol to another protocol dynamically, while routing continues. By the insertion of a thin new layer, we were able to make each node in the ad hoc wireless network notify each other about the protocol swap. To ensure that routing works efficiently after the protocol swap, we initialized the destination routing protocol\u27s data structures and reused the previous routing information to build the new routing table. We also tested our approach under different network topologies and traffic patterns in static networks to learn whether the swap was fast and whether the swap incurred too much overhead. We found that the swap latency was related to the nature of the destination protocol and the topology of the network. We also found that the control packet ratio after swap was close to that of the protocol running without swap, which indicates that our method does not incur too much overhead for the swap

A Combined Routing Method for Ad hoc Wireless Networks

To make ad hoc wireless networks adaptive to different mobility and traffic patterns, we studied in this thesis an approach to swap from one protocol to another protocol dynamically, while routing continues. By the insertion of a new layer, we were able to make each node in the ad hoc wireless network notify each other about the protocol swap. To ensure that routing works efficiently after the protocol swap, we initialized the destination routing protocol\u27s data structures and reused the previous routing information to build the new routing table. We also tested our approach under different network topologies and traffic patterns in static networks to learn whether the swap is fast and whether the swap incurs too much overload . We found that the swap latency is related to the destination protocol and the topology of the network. We also found that the control packet ratio after swap is close to the protocol running without swap, which means our method does not incur too many control packets for swap

Reliable Multicast in Mobile Ad Hoc Wireless Networks

A mobile wireless ad hoc network (MANET) consists of a group of mobile nodes communicating wirelessly with no fixed infrastructure. Each node acts as source or receiver, and all play a role in path discovery and packet routing. MANETs are growing in popularity due to multiple usage models, ease of deployment and recent advances in hardware with which to implement them. MANETs are a natural environment for multicasting, or group communication, where one source transmits data packets through the network to multiple receivers. Proposed applications for MANET group communication ranges from personal network apps, impromptu small scale business meetings and gatherings, to conference, academic or sports complex presentations for large crowds reflect the wide range of conditions such a protocol must handle. Other applications such as covert military operations, search and rescue, disaster recovery and emergency response operations reflect the mission critical nature of many ad hoc applications. Reliable data delivery is important for all categories, but vital for this last one. It is a feature that a MANET group communication protocol must provide. Routing protocols for MANETs are challenged with establishing and maintaining data routes through the network in the face of mobility, bandwidth constraints and power limitations. Multicast communication presents additional challenges to protocols. In this dissertation we study reliability in multicast MANET routing protocols. Several on-demand multicast protocols are discussed and their performance compared. Then a new reliability protocol, R-ODMRP is presented that runs on top of ODMRP, a well documented best effort protocol with high reliability. This protocol is evaluated against ODMRP in a standard network simulator, ns-2. Next, reliable multicast MANET protocols are discussed and compared. We then present a second new protocol, Reyes, also a reliable on-demand multicast communication protocol. Reyes is implemented in the ns-2 simulator and compared against the current standards for reliability, flooding and ODMRP. R-ODMRP is used as a comparison point as well. Performance results are comprehensively described for latency, bandwidth and reliable data delivery. The simulations show Reyes to greatly outperform the other protocols in terms of reliability, while also outperforming R-ODMRP in terms of latency and bandwidth overhead

Experimental evaluation of the usage of ad hoc networks as stubs for multiservice networks

This paper describes an experimental evaluation of a multiservice ad hoc network, aimed to be interconnected with an infrastructure, operator-managed network. This network supports the efficient delivery of services, unicast and multicast, legacy and multimedia, to users connected in the ad hoc network. It contains the following functionalities: routing and delivery of unicast and multicast services; distributed QoS mechanisms to support service differentiation and resource control responsive to node mobility; security, charging, and rewarding mechanisms to ensure the correct behaviour of the users in the ad hoc network. This paper experimentally evaluates the performance of multiple mechanisms, and the influence and performance penalty introduced in the network, with the incremental inclusion of new functionalities. The performance results obtained in the different real scenarios may question the real usage of ad-hoc networks for more than a minimal number of hops with such a large number of functionalities deployed

Rohc-Mpls Tunnel Architecture For Wireless Mesh

Natural or human-made disasters are sudden events that can cause significant damage, especially to the network communication infrastructure. In these events, a rapid deployment of network communication systems is required in order to relay or receive the communication among the people in the disaster areas to conduct relief and rescue efforts. Wireless mesh networks have emerged and has been recognised for its potential for rapid deployment and last mile coverage of network infrastructure, which is highly suitable for emergency response management. While wireless mesh networks have beneficial attributes, it also introduces some crucial problems. During data transmission, the path recovery time is significantly higher resulting in the loss of data if node and link failures occur

Adoption of vehicular ad hoc networking protocols by networked robots

This paper focuses on the utilization of wireless networking in the robotics domain. Many researchers have already equipped their robots with wireless communication capabilities, stimulated by the observation that multi-robot systems tend to have several advantages over their single-robot counterparts. Typically, this integration of wireless communication is tackled in a quite pragmatic manner, only a few authors presented novel Robotic Ad Hoc Network (RANET) protocols that were designed specifically with robotic use cases in mind. This is in sharp contrast with the domain of vehicular ad hoc networks (VANET). This observation is the starting point of this paper. If the results of previous efforts focusing on VANET protocols could be reused in the RANET domain, this could lead to rapid progress in the field of networked robots. To investigate this possibility, this paper provides a thorough overview of the related work in the domain of robotic and vehicular ad hoc networks. Based on this information, an exhaustive list of requirements is defined for both types. It is concluded that the most significant difference lies in the fact that VANET protocols are oriented towards low throughput messaging, while RANET protocols have to support high throughput media streaming as well. Although not always with equal importance, all other defined requirements are valid for both protocols. This leads to the conclusion that cross-fertilization between them is an appealing approach for future RANET research. To support such developments, this paper concludes with the definition of an appropriate working plan

Simulating mobile ad hoc networks: a quantitative evaluation of common MANET simulation models

Because it is difficult and costly to conduct real-world mobile ad hoc network experiments, researchers commonly rely on computer simulation to evaluate their routing protocols. However, simulation is far from perfect. A growing number of studies indicate that simulated results can be dramatically affected by several sensitive simulation parameters. It is also commonly noted that most simulation models make simplifying assumptions about radio behavior. This situation casts doubt on the reliability and applicability of many ad hoc network simulation results. In this study, we begin with a large outdoor routing experiment testing the performance of four popular ad hoc algorithms (AODV, APRL, ODMRP, and STARA). We present a detailed comparative analysis of these four implementations. Then, using the outdoor results as a baseline of reality, we disprove a set of common assumptions used in simulation design, and quantify the impact of these assumptions on simulated results. We also more specifically validate a group of popular radio models with our real-world data, and explore the sensitivity of various simulation parameters in predicting accurate results. We close with a series of specific recommendations for simulation and ad hoc routing protocol designers

Improving Multicast Communications Over Wireless Mesh Networks

In wireless mesh networks (WMNs) the traditional approach to shortest path tree based multicasting is to cater for the needs of the poorest performingnode i.e. the maximum permitted multicast line rate is limited to the lowest line rate used by the individual Child nodes on a branch. In general, this meansfixing the line rate to its minimum value and fixing the transmit power to its maximum permitted value. This simplistic approach of applying a single multicast rate for all nodes in the multicast group results in a sub-optimal trade-off between the mean network throughput and coverage area that does not allow for high bandwidth multimedia applications to be supported. By relaxing this constraint and allowing multiple line rates to be used, the mean network throughput can be improved. This thesis presents two methods that aim to increase the mean network throughput through the use of multiple line rates by the forwarding nodes. This is achieved by identifying the Child nodes responsible for reducing the multicast group rate. The first method identifies specific locations for the placement of relay nodes which allows for higher multicast branch line rates to be used. The second method uses a power control algorithm to tune the transmit power to allow for higher multicast branch line rates. The use of power control also helps to reduce the interference caused to neighbouring nodes.Through extensive computer simulation it can be shown that these two methods can lead to a four-fold gain in the mean network throughput undertypical WMN operating conditions compared with the single line rate case

Easy Wireless: broadband ad-hoc networking for emergency services

Wireless ad-hoc networks will enable emergency services to continuously overview and act upon the actual status of the situation by retrieving and exchanging detailed up-to-date information between the rescue workers. Deployment of high-bandwidth, robust, self-organising ad-hoc networks will enable quicker response to typical what/where/when questions, than the more vulnerable low-bandwidth communication networks currently in use. This paper addresses a number of results of the Easy Wireless project that enable high bandwidth robust ad-hoc networking. Most of the concepts presented here have been experimentally verified and/or prototyped