2008 Index IEEE Transactions on Control Systems Technology Vol. 16

This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index

2009 Index IEEE Antennas and Wireless Propagation Letters Vol. 8

This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index

Ultrawideband Technology for Medical In-Body Sensor Networks: An Overview of the Human Body as a Propagation Medium, Phantoms, and Approaches for Propagation Analysis

[EN] An in-body sensor network is that in which at least one of the sensors is located inside the human body. Such wireless in-body sensors are used mainly in medical applications, collecting and monitoring important parameters for health and disease treatment. IEEE Standard 802.15.6-2012 for wireless body area networks (WBANs) considers in-body communications in the Medical Implant Communications Service (MICS) band. Nevertheless, high-data-rate communications are not feasible at the MICS band because of its narrow occupied bandwidth. In this framework, ultrawideband (UWB) systems have emerged as a potential solution for in-body highdata-rate communications because of their miniaturization capabilities and low power consumption.This work was supported by the Programa de Ayudas de Investigación y Desarrollo (PAID-01-16) at the Universitat Politècnica de València, Spain; by the Ministerio de Economía y Competitividad, Spain (TEC2014-60258-C2-1-R); and by the European FEDER funds. It was also funded by the European Union’s H2020:MSCA:ITN program for the Wireless In-Body Environ-ment Communication–WiBEC project under grant 675353.Garcia-Pardo, C.; Andreu-Estellés, C.; Fornés Leal, A.; Castelló-Palacios, S.; Pérez-Simbor, S.; Barbi, M.; Vallés Lluch, A.... (2018). Ultrawideband Technology for Medical In-Body Sensor Networks: An Overview of the Human Body as a Propagation Medium, Phantoms, and Approaches for Propagation Analysis. IEEE Antennas and Propagation Magazine. 60(3):19-33. https://doi.org/10.1109/MAP.2018.2818458S193360

THZ RF measurement techniques

Abstract. In this thesis, literature review on available methods, techniques and procedures for terahertz antenna measurement system and terahertz propagation measurement system are reported. The paper presented the terahertz frequency spectrum allocation by FCC, ITU, ETSI and its application in wireless communication system with advantage in obtaining terabits per second data rates. Terahertz antenna parameters are reported and measurement systems for measurement of these chapters are reviewed. Literature of three papers on terahertz antenna measurement system with their respective measurement setup, calibration techniques and measurement procedures are reviewed. An automated antenna measurement system is reviewed with stochastic and systematic measurements and has achieved terahertz antenna s-parameter measurements in far field region at frequency range of 220 GHz to 330 GHz. Another measurement system with single port short-open-load (SOL) calibration technique is reviewed. In this measurement of s-parameter of terahertz antenna is carried out, using receiver horn placed on 3 D positioner, which records the AUT 3D radiation pattern. The third paper reviewed, is a reconfigurable terahertz antenna measurement system, with capabilities of working on large bandwidths, with small change in work bench instrumentation. This setup contains the multiplexing stages for terahertz frequency generation. Beam pattern measurements are conducted at 1.37 THz supporting the simulations and the system stability for reconfigurations. In the later study, terahertz propagation parameters are studied and presented for review of available terahertz propagation measurement systems. Literature review of three papers describing different setup and procedures for terahertz propagation measurement system are reported. The first system with the setup to record path loss in LOS and NLOS links at 260 GHz to 400 GHz is presented. Propagation parameters containing reflections, shadowing is measured. LOS and NLOS channel capacity models are obtained based on data rates in terabits per second for using above 5G wireless communication systems. Another system with office architecture, indoor LOS link, viable for indoor wireless communication applications is reported. Propagation parameters containing power density profile (PDP) are measured and validated for 140 GHz to 220 GHz. A measurement system which reports effect of atmospheric pressure, temperature and humidity is reported in the last. The setup used short, offset-short, load and thru (SOLT) technique for calibration and PDP propagation parameter is measured for 0.5 THz to 0.75 THz. Terahertz antenna and wave propagation measurement system reviewed in the papers are vital for development of terahertz systems in wireless and mobile communication. Further the study can be extended for measurement of terahertz antennas and wave propagation parameters with models of use in wireless hand-held devices, connected devices, mobile backhaul system and more

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium