824 research outputs found

    MECHANICAL ENERGY HARVESTER FOR POWERING RFID SYSTEMS COMPONENTS: MODELING, ANALYSIS, OPTIMIZATION AND DESIGN

    Get PDF
    Finding alternative power sources has been an important topic of study worldwide. It is vital to find substitutes for finite fossil fuels. Such substitutes may be termed renewable energy sources and infinite supplies. Such limitless sources are derived from ambient energy like wind energy, solar energy, sea waves energy; on the other hand, smart cities megaprojects have been receiving enormous amounts of funding to transition our lives into smart lives. Smart cities heavily rely on smart devices and electronics, which utilize small amounts of energy to run. Using batteries as the power source for such smart devices imposes environmental and labor cost issues. Moreover, in many cases, smart devices are in hard-to-access places, making accessibility for disposal and replacement difficult. Finally, battery waste harms the environment. To overcome these issues, vibration-based energy harvesters have been proposed and implemented. Vibration-based energy harvesters convert the dynamic or kinetic energy which is generated due to the motion of an object into electric energy. Energy transduction mechanisms can be delivered based on piezoelectric, electromagnetic, or electrostatic methods; the piezoelectric method is generally preferred to the other methods, particularly if the frequency fluctuations are considerable. In response, piezoelectric vibration-based energy harvesters (PVEHs), have been modeled and analyzed widely. However, there are two challenges with PVEH: the maximum amount of extractable voltage and the effective (operational) frequency bandwidth are often insufficient. In this dissertation, a new type of integrated multiple system comprised of a cantilever and spring-oscillator is proposed to improve and develop the performance of the energy harvester in terms of extractable voltage and effective frequency bandwidth. The new energy harvester model is proposed to supply sufficient energy to power low-power electronic devices like RFID components. Due to the temperature fluctuations, the thermal effect over the performance of the harvester is initially studied. To alter the resonance frequency of the harvester structure, a rotating element system is considered and analyzed. In the analytical-numerical analysis, Hamilton’s principle along with Galerkin’s decomposition approach are adopted to derive the governing equations of the harvester motion and corresponding electric circuit. It is observed that integration of the spring-oscillator subsystem alters the boundary condition of the cantilever and subsequently reforms the resulting characteristic equation into a more complicated nonlinear transcendental equation. To find the resonance frequencies, this equation is solved numerically in MATLAB. It is observed that the inertial effects of the oscillator rendered to the cantilever via the restoring force effects of the spring significantly alter vibrational features of the harvester. Finally, the voltage frequency response function is analytically and numerically derived in a closed-from expression. Variations in parameter values enable the designer to mutate resonance frequencies and mode shape functions as desired. This is particularly important, since the generated energy from a PVEH is significant only if the excitation frequency coming from an external source matches the resonance (natural) frequency of the harvester structure. In subsequent sections of this work, the oscillator mass and spring stiffness are considered as the design parameters to maximize the harvestable voltage and effective frequency bandwidth, respectively. For the optimization, a genetic algorithm is adopted to find the optimal values. Since the voltage frequency response function cannot be implemented in a computer algorithm script, a suitable function approximator (regressor) is designed using fuzzy logic and neural networks. The voltage function requires manual assistance to find the resonance frequency and cannot be done automatically using computer algorithms. Specifically, to apply the numerical root-solver, one needs to manually provide the solver with an initial guess. Such an estimation is accomplished using a plot of the characteristic equation along with human visual inference. Thus, the entire process cannot be automated. Moreover, the voltage function encompasses several coefficients making the process computationally expensive. Thus, training a supervised machine learning regressor is essential. The trained regressor using adaptive-neuro-fuzzy-inference-system (ANFIS) is utilized in the genetic optimization procedure. The optimization problem is implemented, first to find the maximum voltage and second to find the maximum widened effective frequency bandwidth, which yields the optimal oscillator mass value along with the optimal spring stiffness value. As there is often no control over the external excitation frequency, it is helpful to design an adaptive energy harvester. This means that, considering a specific given value of the excitation frequency, energy harvester system parameters (oscillator mass and spring stiffness) need to be adjusted so that the resulting natural (resonance) frequency of the system aligns with the given excitation frequency. To do so, the given excitation frequency value is considered as the input and the system parameters are assumed as outputs which are estimated via the neural network fuzzy logic regressor. Finally, an experimental setup is implemented for a simple pure cantilever energy harvester triggered by impact excitations. Unlike the theoretical section, the experimental excitation is considered to be an impact excitation, which is a random process. The rationale for this is that, in the real world, the external source is a random trigger. Harmonic base excitations used in the theoretical chapters are to assess the performance of the energy harvester per standard criteria. To evaluate the performance of a proposed energy harvester model, the input excitation type consists of harmonic base triggers. In summary, this dissertation discusses several case studies and addresses key issues in the design of optimized piezoelectric vibration-based energy harvesters (PVEHs). First, an advanced model of the integrated systems is presented with equation derivations. Second, the proposed model is decomposed and analyzed in terms of mechanical and electrical frequency response functions. To do so, analytic-numeric methods are adopted. Later, influential parameters of the integrated system are detected. Then the proposed model is optimized with respect to the two vital criteria of maximum amount of extractable voltage and widened effective (operational) frequency bandwidth. Corresponding design (influential) parameters are found using neural network fuzzy logic along with genetic optimization algorithms, i.e., a soft computing method. The accuracy of the trained integrated algorithms is verified using the analytical-numerical closed-form expression of the voltage function. Then, an adaptive piezoelectric vibration-based energy harvester (PVEH) is designed. This final design pertains to the cases where the excitation (driving) frequency is given and constant, so the desired goal is to match the natural frequency of the system with the given driving frequency. In this response, a regressor using neural network fuzzy logic is designed to find the proper design parameters. Finally, the experimental setup is implemented and tested to report the maximum voltage harvested in each test execution

    Beam scanning by liquid-crystal biasing in a modified SIW structure

    Get PDF
    A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

    Compute-proximal Energy Harvesting for Mobile Environments: Fundamentals, Applications, and Tools

    Get PDF
    Over the past two decades, we have witnessed remarkable achievements in computing, sensing, actuating, and communications capabilities of ubiquitous computing applications. However, due to the limitations in stable energy supply, it is difficult to make the applications ubiquitous. Batteries have been considered a promising technology for this problem, but their low energy density and sluggish innovation have constrained the utility and expansion of ubiquitous computing. Two key techniques—energy harvesting and power management—have been studied as alternatives to overcome the battery limitations. Compared to static environments such as homes or buildings, there are more energy harvesting opportunities in mobile environments since ubiquitous systems can generate various forms of energy as they move. Most of the previous studies in this regard have been focused on human movements for wearable computing, while other mobile environments (e.g., cars, motorcycles, and bikes) have received limited attention. In this thesis, I present a class of energy harvesting approaches called compute-proximal energy harvesting, which allows us to develop energy harvesting technology where computing, sensing, and actuating are needed in vehicles. Computing includes sensing phenomena, executing instructions, actuating components, storing information, and communication. Proximal considers the harvesting of energy available around the specific location where computation is needed, reducing the need for excessive wiring. A primary goal of this new approach is to mitigate the effort associated with the installation and field deployment of self-sustained computing and lower the entry barriers to developing self-sustainable systems for vehicles. In this thesis, I first select an automobile as a promising case study and discuss the opportunities, challenges, and design guidelines of compute-proximal energy harvesting with practical yet advanced examples in the automotive domain. Second, I present research in the design of small-scale wind energy harvesters and the implementation and evaluation of two advanced safety sensing systems—a blind spot monitoring system and a lane detection system—with the harvested power from wind. Finally, I conduct a study to democratize the lessons learned from the automotive case studies for makers and people with no prior experience in energy harvesting technology. In this study, I seek to understand what problems they have encountered and what possible solutions they have considered while dealing with energy harvesting technology. Based on the findings, I develop a comprehensive energy harvesting toolkit and examine its utility, usability, and creativity through a series of workshops.Ph.D

    Development of a Microwave Imaging System for Brain Injury

    Get PDF

    Mögliche gesundheitliche Auswirkungen verschiedener Frequenzbereiche elektromagnetischer Felder (HF-EMF). Endbericht zum TA-Projekt

    Get PDF
    Hochfrequente elektromagnetische Felder (HF-EMF) bilden die Grundlage aller digitalen, drahtlosen Kommunikation im gesamten öffentlichen Raum und in den privaten Haushalten. In den kommenden Jahren ist mit einer weiteren Zunahme von EMF-Quellen verschiedener Frequenzbereiche zu rechnen. Hauptgrund hierfür ist die rasant fortschreitende Digitalisierung nahezu aller Arbeits-, Lebens- und Wirtschaftsbereiche, die zugleich eng mit mobil zu nutzenden Technologien verbunden ist. Vor diesem Hintergrund stellt der vorliegende Bericht den aktuellen Wissensstand zu möglichen gesundheitlichen Risiken elektromagnetischer Felder – insbesondere des Mobilfunks – dar. Dazu wurde die neuere internationale wissenschaftliche Literatur umfassend gesichtet und die Ergebnisse aktueller nationaler und internationaler Forschungsprojekten daraufhin analysiert, ob relevante neue Erkenntnisse vorliegen, die die Diskussionen zu möglichen gesundheitlichen Risiken der HF-EMF substanziell verändern könnten. Ein weiterer Schwerpunkt lag auf Forschungsbemühungen, die einen substanziellen Beitrag zur verbesserten Risikobewertung der Exposition von jungen Menschen leisten wollen. Darüber hinaus diskutiert der Bericht relevante Aspekte der EMF-Risikogovernance (z.B. Öffentlichkeitsbeteiligung, Interessenkonflikte, Risikoinformation und -kommunikation) und beschreibt Optionen, wie im Kontext des EMF-Diskurses Barrieren für eine offene wechselseitige Kommunikation von Akteursgruppen – insbesondere zwischen Wissenschaft, Zivilgesellschaft und Politik – abgebaut werden können

    From a better use of instrumentation to new detection methods in NMR and EPR spectroscopy

    Get PDF
    NMR and EPR spectroscopy are two of the most important techniques to get quantitative, structural or dynamical information on molecular systems. After covering the fundamentals of these magnetic resonance techniques, this thesis explores ways to improve the usage of current spectrometers and to create new instruments altogether using different detection methods with quantum sensing. First, to deal with bandwidth and oscillating magnetic field limitations typically present for 19F nuclei in NMR or unpaired electrons in EPR, improved methods based on frequency-swept pulses are presented. The implementation of the CHORUS sequence in EPR spectroscopy is detailed. New pulse sequences, namely CHORUSCPMG, PROCHORUS and superposed frequency-swept pulses, are presented in the context of solution-state NMR spectroscopy. Then, on-the-fly optimisation is proposed as a tool to automate EPR experiments and even develop new ones. A software package, ESR-POISE, was released to allow EPR users with commercial spectrometers to access such methods. Finally, the construction of a spectrometer which can conduct magnetic resonance at unconventionally small scales thanks to quantum sensors (NV centres) is detailed. After describing design choices for the different elements of the instrument, a focus is made on the static magnetic field with Finite Element Analysis

    Design and development of multiband antennas for unmanned aerial vehicles (UAVs)

    Get PDF
    Abstract. This thesis aims to design and analyze microstrip patch antennas for unmanned aerial vehicles (UAVs) for Internet of Things (IoT) communication. With the growing need for reliable and efficient communication in UAV, understanding the unique challenges and requirements of antenna design for UAV-based communication systems becomes crucial. During the process of antenna integration onto the UAV body, important attention must be given to vital factors including the availability of mounting space, weight limitations, and radiation parameters. In this study, extensive efforts were made in the design of the antenna to meet the specific requirements for UAV applications. The antenna structure chosen was a microstrip patch antenna with an inset feed technique. The design aimed at optimizing the antenna for multi-band operation, ensuring compatibility with various communication frequencies. Careful considerations were made regarding size, weight, and functionality to ensure the antenna’s suitability for UAV applications. The first part of the thesis introduces the antenna theory, highlighting significant parameters such as radiation pattern, gain, and efficiency, which are crucial for UAV antenna design. The methodology for selecting various parameters is explained, and the radiation pattern and gain of two commercially available antennas were measured in the SATIMO chamber as a benchmark. The fabricated microstrip patch antenna was also tested both with and without the presence of a UAV to examine the impact of the UAV’s body on its performance. The designed antenna demonstrated a semi-omnidirectional pattern at sub-gigahertz frequencies, achieving a gain value exceeding 6 dBi, thereby fulfilling the requirements for UAV applications. The second part of this thesis focused on further advancements in the design process. Efforts were made to improve the antenna’s performance and behavior through various design modifications and optimizations. The design process involved iterative steps, such as adjusting the dimensions and parameters of the antenna to enhance its performance metrics. The results obtained demonstrated notable improvements in terms of radiation patterns with 92 degree of 3 dB angular beamwidth, gain enhancement up to 6.7 dBi, and overall antenna performance. These findings contribute to the body of knowledge in UAV antenna design and highlight the potential for further advancements in this field

    Estudio y diseño de un filtro microstrip para supresión de interferencias en radioastronomía

    Get PDF
    El presente proyecto propone un diseño único de un filtro paso banda basado en la tecnología microstrip; que permite filtrar frecuencias no deseadas para la aplicación en la recepción de señales radioastronómi cas. Para ello, se ha conseguido un filtro con las menores pérdidas de inserción posibles, y con mayor ancho de banda en comparación con los filtros UWB tradicionales, para de esta manera, cubrir las frecuencias de trabajo del proyecto de geodesia espacial VGOS. Por tanto, este trabajo consistirá en el diseño y simulación del filtro utilizando el programa ANSYS HFSS, seguido de la construcción del filtro utilizando el sustrato ROGERS 6010 y su correspondiente caja. Finalmente se caracterizará el filtro con un analizador vectorial tanto a temperatura ambiente como a temperaturas criogénicas. Al caracterizar el filtro a estas temperaturas se evalúa su funcionamiento en condiciones análogas a la aplicación real, verificando que contribuye con la mínima cantidad de ruido posible al receptor.The present project proposes a unique design of a microstrip technology-based bandpass filter, which allows filtering out unwanted frequencies for use in the reception of radioastronomical signals. To achieve this, a filter with the lowest possible insertion losses has been obtained, along with a wider bandwidth compared to traditional UWB filters, in order to cover the working frequencies of the VGOS space geodesy project. Therefore, this work will involve the design and simulation of the filter using the ANSYS HFSS program, followed by the construction of the filter using ROGERS 6010 substrate and its corresponding enclosure. Finally, the filter will be characterized using a vector network analyzer at both room temperature and cryogenic temperatures. By characterizing the filter at these temperatures, its performance under conditions analogous to the real application will be evaluated, ensuring that it contributes the minimum amount of noise possible to the receiver.Grado en Ingeniería en Tecnologías de Telecomunicació

    Design and Development of a Multi-Frequency System for Microwave Heating

    Full text link
    [ES] La utilización de sistemas de microondas para aplicaciones de calentamiento está muy extendida, principalmente por su uso en el calentamiento doméstico. El volumen de ventas del horno de microondas doméstico refleja un dato curioso: es el electrodoméstico más vendido en el mundo cada año. Por ello, el coste de producción del elemento principal, el magnetrón, presenta unos márgenes de beneficio imbatibles. Sin embargo, los avances en la fabricación de generadores de RF de alta potencia de estado sólido han puesto de manifiesto no solo las limitaciones de los sistemas basados en magnetrón sino también las grandes ventajas de la tecnología de transistores. Actualmente, los amplificadores de potencia de estado sólido han alcanzado una madurez suficiente como para competir en eficiencia, coste y calidad de la onda generada con el magnetrón. Las principales ventajas de los transistores son un reducido tamaño, tensiones de alimentación bajas, un espectro puro en frecuencia, un mayor tiempo de vida y el control digital directo. Los sistemas de microondas con esta tecnología están siendo introducidos en el mercado desde hace diez años, aunque las aplicaciones reales que los utilizan son escasas. La principal razón es la falta de diseños de aplicadores específicos para sacar el máximo provecho a las fuentes de estado sólido. , por tanto, es éste el objetivo de la tesis doctoral. Los sistemas S2MH (Solid-State Microwave Heating) se presentan en esta disertación doctoral como una alternativa que ofrece un calentamiento mejorado. La posibilidad de seleccionar la frecuencia exacta, ajustar la potencia de salida y realizar barridos de fase de forma coherente con múltiples iluminadores proporcionan al sistema un control preciso del proceso de calentamiento. El resultado directo de éste es un calentamiento homogéneo y el uso de la tecnología de microondas en procesos de alto valor añadido y fuerte dependencia con la temperatura. Esta tesis doctoral presenta el trabajo realizado en el diseño y fabricación de dos sistemas S2MH: el primero es un horno estático versátil para diferentes procesos químicos, y el segundo un horno de transporte para el secado de almendras. Estos dos sistemas están formados por el SSMGS (Solid-State Microwave Generator System), que incluye cuatro amplificadores de estado sólido (SSPA) con una generación de la onda coherente, y el aplicador. Para el diseño del SSMGS se han tenido en cuenta los requisitos de potencia y frecuencia de cada aplicación. Se ha utilizado un SSMGS con cuatro PA de 250 W a 2,450 MHz para el horno de aplicaciones químicas, mientras que el secado de almendras necesita cuatro PA de 500 W a 915 MHz. Los dos sistemas de generación de microondas permiten un control individual o combinado de los parámetros de los cuatro módulos amplificadores, i.e., potencia, frecuencia y fase. Todo el proceso de diseño ha sido llevado a cabo mediante modelado multi-físico, poniendo un especial cuidado en las propiedades termofísicas y dieléctricas de los alimentos y soluciones acuosas que tienen una importante dependencia con la temperatura. El comportamiento completo del sistema aplicador se ha estudiado con estas herramientas. Tras la fabricación de los dos prototipos o pruebas de concepto (PoC), los resultados obtenidos presentan un comportamiento similar al modelo y muestran, además, prometedoras mejoras frente a los sistemas actuales. El sistema de aplicaciones químicas presenta mejoras en la distribución de campo, independientemente de la aplicación y la carga. Y el sistema de secado de almendras proporciona un mayor control sobre el proceso evitando la pérdida de material por sobrecalentamiento.[CA] La utilització de sistemes de microones en aplicacions d'escalfament està molt estesa, principalment pel seu us en escalfament domèstic. El volum de ventes del forn de microones domèstic reflexa una informació curiosa: es l'electrodomèstic més venut anualment al món. Per això, el cost de producció del seu element principal, el magnetró, presenta uns marges de benefici imbatibles. No obstant això, els avanços en la fabricació de generadors de RF d'alta potencia d'estat sòlid han posat de manifest tant les limitacions dels sistemes basats en magnetró, com els grans avantatges de la tecnologia de transistors. Actualment, els amplificadors de potència d'estat sòlid son el suficientment madurs com per competir en eficiència, cost i qualitat de l'ona generada amb el magnetró. Els principals avantatges dels transistors son les dimensions reduïdes, tensions d'alimentació baixes, un espectre pur en freqüència, major temps de vida i el control digital directe. Els sistemes de microones amb aquesta tecnologia estan sent introduïts al mercat des de fa deu anys, malgrat les aplicacions reals son escasses. El principal motiu és la falta de dissenys de aplicadors específics per obtindré el màxim profit de les fonts d'estat sòlid. , por tanto, es éste el objetivo de la tesis doctoral. Els sistemes S2MH es presenten en esta dissertació doctoral com una alternativa que ofereix un escalfament millorat. La possibilitat de seleccionar la freqüència exacta, ajustar la potència d'eixida i realitzar un rastreig de fase de forma coherent amb molts il·luminadors proporcionen al sistema un control precís del procés d'escalfament. El resultat directe d'aquest es un escalfament homogeni i el us de la tecnologia de microones en processos d'alt valor afegit i alta sensibilitat a la temperatura. Aquesta dissertació doctoral presenta el treball realitzat en el disseny i fabricació de dos sistemes S2MH: el primer és un forn estàtic i versàtil per a diferent processos químics, i el segon es tracta d'un forn de transport per l'assecatge d'ametles. Tots dos sistemes estan formats pel SSMGS, que inclou quatre amplificadors d'estat sòlid (SSPA) amb generació coherent de l'ona, i l'aplicador. Per al disseny del SSMGS s'han tingut en compte els requisits de potència i freqüència de cada aplicació. S'ha utilitzat un SSMGS amb quatre PA de 250 W a 2,450 MHz per al forn d'aplicacions químiques, mentre que per al d'assecat d'ametla es necessita quatre PA de 500 W a 915 MHz. Ambdós sistemes de generació de microones permeten un control individual o combinat dels paràmetres dels quatre mòduls amplificadors, i.e., potència, freqüència i fase. Tot el procés de disseny ha sigut realitzat amb l'ajuda del modelat multi-físic, prestant una especial atenció a les propietats termofísiques i dielèctriques dels aliments i solucions aquoses, que tenen una important dependència de la temperatura. El comportament complet del sistema aplicador ha sigut estudiat amb estes ferramentes digitals. Després de la fabricació dels dos prototips o proves de concepte (PoC), els resultats obtinguts presenten un comportament similar al model i, a més a més, mostren millores prometedores front als sistemes actuals. El sistema d'aplicacions químiques presenta millores en la distribució de camp, independentment de l'aplicació i la càrrega. I el sistema d'assecatge d'ametlles proporciona un major control sobre el procés, evitant la pèrdua de material per sobreescalfament.[EN] Microwave systems are widely used for heating applications, mainly domestic food heating. The microwave oven sales figures place it as the first domestic appliance, giving its core element, the magnetron, an unbeatable production cost margin. However, recent improvements in RF high-power generator manufacturing have pointed out not only the limitations of these systems based on the magnetron but also the main benefits of the transistors technology. Nowadays, solid-state power amplifiers are mature enough to compete in efficiency, cost and quality with the magnetron. Transistors' main benefits are their reduced size, low operation voltages, pure frequency spectrum, lifetime, and straightforward digital control. Microwave systems based on solid-state power amplifiers have been recently introduced, although the real applications making use of them are rare. The main issue is the lack of applicator designs for specific solid-state sources that fully exploit the mentioned advantages; therefore, this is the main objective of the present PhD thesis. Solid-State Microwave Heating (S2MH) systems are presented in this PhD dissertation as an alternative that offers enhanced heating. Fine frequency selection, adjustable output power and coherent phase sweep in multiple outputs provide the system with accurate control over the heating process. The direct outcome of this control is the production of homogeneous heating and the application of microwave technology into high-added-value temperature-sensitive processes. The complete design and manufacture of two S2MH systems have been carried out and presented in this PhD thesis. The two designed systems are a multi-process chemical lab batch oven and an almond drying conveyorized oven. These two systems are composed of the Solid-State Microwave Generator System (SSMGS), consisting of four Solid-State Power Amplifiers (SSPA) with coherent wave generation, and the applicator. The design of the SSMGS has been carried out according to the power and frequency requirements of the application. A 4 x 250 W SSPA at 2,450 MHz SSMGS has been used for the chemical processes oven, while the almond drying application needs 4 x 500 W SSPA at 915 MHz. Both SSMGS allow the individual or combined digital control of the parameters of the four amplifying modules, i.e., power, frequency and phase. Multiphysics modelling has been thoroughly studied with special attention to the temperature-dependent thermophysical and dielectric properties of food and liquid solutions. The overall applicators' behaviour has been analysed with this tool. After completing the two PoC (Proof of Concept), the results show good agreement with the models. Both PoCs have shown promising improvements to the current state-of-the-art systems. The chemical applications PoC shows electromagnetic field distribution improvements, independent of the application or load. On the other hand, the almonds drying system provides increased control over the process avoiding material losses through overheating.Santón Pons, P. (2022). Design and Development of a Multi-Frequency System for Microwave Heating [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/19132

    Accessibility of Health Data Representations for Older Adults: Challenges and Opportunities for Design

    Get PDF
    Health data of consumer off-the-shelf wearable devices is often conveyed to users through visual data representations and analyses. However, this is not always accessible to people with disabilities or older people due to low vision, cognitive impairments or literacy issues. Due to trade-offs between aesthetics predominance or information overload, real-time user feedback may not be conveyed easily from sensor devices through visual cues like graphs and texts. These difficulties may hinder critical data understanding. Additional auditory and tactile feedback can also provide immediate and accessible cues from these wearable devices, but it is necessary to understand existing data representation limitations initially. To avoid higher cognitive and visual overload, auditory and haptic cues can be designed to complement, replace or reinforce visual cues. In this paper, we outline the challenges in existing data representation and the necessary evidence to enhance the accessibility of health information from personal sensing devices used to monitor health parameters such as blood pressure, sleep, activity, heart rate and more. By creating innovative and inclusive user feedback, users will likely want to engage and interact with new devices and their own data
    • …
    corecore