145 research outputs found
Understanding the Potential and Limitations of Tunnel FETs for Low-Voltage Analog/Mixed-Signal Circuits
In this paper, the analog/mixed-signal performance is evaluated at device and circuit levels for a III-V nanowire tunnel field effect transistor (TFET) technology platform and compared against the predictive model for FinFETs at the 10-nm technology node. The advantages and limits of TFETs over their FinFET counterparts are discussed in detail, considering the main analog figures of merits, as well as the implementation of low-voltage track and-hold (T/H) and comparator circuits. It is found that the higher output resistance offered by TFET-based designs allows achieving significantly higher intrinsic voltage gain and higher maximum-oscillation frequency at low current levels. TFET-based T/H circuits have better accuracy and better hold performance by using the dummy switch solution for the mitigation of the charge injection. Among the comparator circuits, the TFET-based conventional dynamic architecture exhibits the best performance while keeping lower area occupation with respect to the more complex double-tail circuits. Moreover, it outperforms all the FinFET counterparts over a wide range of supply voltage when considering low values of the common-mode voltage
Recommended from our members
A Process Variation Tolerant Self-Compensation Sense Amplifier Design
As we move under the aegis of the Moore\u27s law, we have to deal with its darker side with problems like leakage and short channel effects. Once we go beyond 45nm regime process variations also have emerged as a significant design concern.Embedded memories uses sense amplifier for fast sensing and typically, sense amplifiers uses pair of matched transistors in a positive feedback environment. A small difference in voltage level of applied input signals to these matched transistors is amplified and the resulting logic signals are latched. Intra die variation causes mismatch between the sense transistors that should ideally be identical structures. Yield loss due to device and process variations has never been so critical to cause failure in circuits. Due to growth in size of embedded SRAMs as well as usage of sense amplifier based signaling techniques, process variations in sense amplifiers leads to significant loss of yield for that we need to come up with process variation tolerant circuit styles and new devices. In this work impact of transistor mismatch due to process variations on sense amplifier is evaluated and this problem is stated. For the solution of the problem a novel self compensation scheme on sense amplifiers is presented on different technology nodes up to 32nm on conventional bulk MOSFET technology. Our results show that the self compensation technique in the conventional bulk MOSFET latch type sense amplifier not just gives improvement in the yield but also leads to improvement in performance for latch type sense amplifiers. Lithography related CD variations, fluctuations in dopant density, oxide thickness and parametric variations of devices are identified as a major challenge to the classical bulk type MOSFET. With the emerging nanoscale devices, SIA roadmap identifies FinFETs as a candidate for post-planar end-of-roadmap CMOS device. With current technology scaling issues and with conventional bulk type MOSFET on 32nm node our technique can easily be applied to Double Gate devices. In this work, we also develop the model of Double Gate MOSFET through 3D Device Simulator Damocles and TCAD simulator. We propose a FinFET based process variation tolerant sense amplifier design that exploits the back gate of FinFET devices for dynamic compensation against process variations. Results from statistical simulation show that the proposed dynamic compensation is highly effective in restoring yield at a level comparable to that of sense amplifiers without process variations. We created the 32nm double gate models generated from Damocles 3-D device simulations [25] and Taurus Device Simulator available commercially from Synopsys [47] and use them in the nominal latch type sense amplifier design and on the Independent Gate Self Compensation Sense Amplifier Design (IGSSA) to compare the yield and performance benefits of sense amplifier design on FinFET technology over the conventional bulk type CMOS based sense amplifier on 32nm technology node effective in restoring yield at a level comparable to that of sense amplifiers without process variations. We created the 32nm double gate models generated from Damocles 3-D device simulations [25] and Taurus Device Simulator available commercially from Synopsys [47] and use them in the nominal latch type sense amplifier design and on the Independent Gate Self Compensation Sense Amplifier Design (IGSSA) to compare the yield and performance benefits of sense amplifier design on FinFET technology over the conventional bulk type CMOS based sense amplifier on 32nm technology node
Benchmarking the screen-grid field effect transistor (SGrFET) for digital applications
Continuous scaling of CMOS technology has now reached a state of evolution, therefore,
novel device structures and new materials have been proposed for this purpose. The Screen-
Grid field Effect Transistor is introduced as a as a novel device structure that takes advantage
of several innovative aspects of the FinFET while introducing new geometrical feature to
improve a FET device performance. The idea is to design a FET which is as small as possible
without down-scaling issues, at the same time satisfying optimum device performance for
both analogue and digital applications. The analogue operation of the SGrFET shows some
promising results which make it interesting to continue the investigation on SGrFET for
digital applications. The SGrFET addresses some of the concerns of scaled CMOS such as
Drain Induce Barrier Lowering and sub-threshold slope, by offering the superior short
channel control. In this work in order to evaluate SGrFET performance, the proposed device
compared to the classical MOSFET and provides comprehensive benchmarking with
finFETs. Both AC and DC simulations are presented using TaurusTM and MediciTM
simulators which are commercially available via Synopsis. Initial investigation on the novel
device with the single gate structure is carried out. The multi-geometrical characteristic of the
proposed device is used to reduce parasitic capacitance and increase ION/IOFF ratio to improve
device performance in terms of switching characteristic in different circuit structures. Using
TaurusTM AC simulation, a small signal circuit is introduced for SGrFET and evaluated using
both extracted small signal elements from TaurusTM and Y-parameter extraction.
The SGrFET allows for the unique behavioural characteristics of an independent-gate device.
Different configurations of double-gate device are introduced and benchmark against the
finFET serving as a double gate device. Five different logic circuits, the complementary and
N-inverter, the NOR, NAND and XOR, and controllable Current Mirror circuits are
simulated with finFET and SGrFET and their performance compared. Some digital key
merits are extracted for both finFET and SGrFET such as power dissipation, noise margin
and switching speed to compare the devices under the investigation performance against each
other. It is shown that using multi-geometrical feature in SGrFET together with its multi-gate
operation can greatly decrease the number of device needed for the logic function without
speed degradation and it can be used as a potential candidate in mix-circuit configuration as a
multi-gate device. The initial fabrication steps of the novel device explained together with
some in-house fabrication process using E-Beam lithography. The fabricated SGrFET is
characterised via electrical measurements and used in a circuit configuration
Simulation of FinFET Structures
The intensive downscaling of MOS transistors has been the major driving force behind the aggressive increases in transistor density and performance, leading to more chip functionality at higher speeds. While on the other side the reduction in MOSFET dimensions leads to the close proximity between source and drain, which in turn reduces the ability of the gate electrode to control the potential distribution and current flow in the channel region and also results in some undesirable effects called the short-channel effects. These limitations associated with downscaling of MOSFET device geometries have lead device designers and researchers to number of innovative techniques which include the use of different device structures, different channel materials, different gate-oxide materials, different processes such as shallow trench isolation, source/drain silicidation, lightly doped extensions etc. to enable controlled device scaling to smaller dimensions. A lot of research and development works have been done in these and related fields and more remains to be carried out in order to exploit these devices for the wider applications
Digital and analog TFET circuits: Design and benchmark
In this work, we investigate by means of simulations the performance of basic digital, analog, and mixed-signal circuits employing tunnel-FETs (TFETs). The analysis reviews and complements our previous papers on these topics. By considering the same devices for all the analysis, we are able to draw consistent conclusions for a wide variety of circuits. A virtual complementary TFET technology consisting of III-V heterojunction nanowires is considered. Technology Computer Aided Design (TCAD) models are calibrated against the results of advanced full-quantum simulation tools and then used to generate look-up-tables suited for circuit simulations. The virtual complementary TFET technology is benchmarked against predictive technology models (PTM) of complementary silicon FinFETs for the 10 nm node over a wide range of supply voltages (VDD) in the sub-threshold voltage domain considering the same footprint between the vertical TFETs and the lateral FinFETs and the same static power. In spite of the asymmetry between p- and n-type transistors, the results show clear advantages of TFET technology over FinFET for VDDlower than 0.4 V. Moreover, we highlight how differences in the I-V characteristics of FinFETs and TFETs suggest to adapt the circuit topologies used to implement basic digital and analog blocks with respect to the most common CMOS solutions
Digital and analog TFET circuits: Design and benchmark
In this work, we investigate by means of simulations the performance of basic digital, analog, and mixed-signal circuits employing tunnel-FETs (TFETs). The analysis reviews and complements our previous papers on these topics. By considering the same devices for all the analysis, we are able to draw consistent conclusions for a wide variety of circuits. A virtual complementary TFET technology consisting of III-V heterojunction nanowires is considered. Technology Computer Aided Design (TCAD) models are calibrated against the results of advanced full-quantum simulation tools and then used to generate look-up-tables suited for circuit simulations. The virtual complementary TFET technology is benchmarked against predictive technology models (PTM) of complementary silicon FinFETs for the 10 nm node over a wide range of supply voltages (VDD) in the sub-threshold voltage domain considering the same footprint between the vertical TFETs and the lateral FinFETs and the same static power. In spite of the asymmetry between p- and n-type transistors, the results show clear advantages of TFET technology over FinFET for VDDlower than 0.4 V. Moreover, we highlight how differences in the I-V characteristics of FinFETs and TFETs suggest to adapt the circuit topologies used to implement basic digital and analog blocks with respect to the most common CMOS solutions
Effect of Gate Length Scaling on Various Performance Parameters in DG-FinFETs: a Simulation Study
This paper presents a simulation study on the gate length scaling of a double gate (DG) FinFET. To achieve channel lengths smaller than 20 nm, innovative device architectures will be necessary to continue the benefits previously acquired through scaling. In order to obtain desirable control of short channel effects (SCEs), the thickness or the horizontal width of a fin in a FinFET should be less than two-third of its gate length and the semiconductor fin should be thin enough in the channel region to ensure forming fully depleted device. The effect of decreasing gate length (Lg) is to deplete more of the region under the inversion layer, which can be easily visualized if the source and drain are imagined to approach one another. If the channel length L is made too small relative to the depletion regions around the source and drain, the SCEs associated with charge sharing and punch through can become intolerable. Thus, to make L small, the depletion region widths should be made small. This can be done by increasing the substrate doping concentration and decreasing the reverse bias. Drain induced barrier lowering (DIBL) increases as gate length is reduced, even at zero applied drain bias, because the source and drain form pn junction with the body, and have associated built-in depletion layers associated with them that become significant partners in charge balance at short channel lengths, even with no reverse bias applied to increase depletion width. The subthreshold slope increases as the device becomes shorter. In fact, when the device becomes very short, the gate no longer controls the drain current and the device cannot be turned off. This is caused by punch through effect. The subthreshold swing (SS) changes with the drain voltage.
When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/2960
Static random-access memory designs based on different FinFET at lower technology node (7nm)
Title from PDF of title page viewed January 15, 2020Thesis advisor: Masud H ChowdhuryVitaIncludes bibliographical references (page 50-57)Thesis (M.S.)--School of Computing and Engineering. University of Missouri--Kansas City, 2019The Static Random-Access Memory (SRAM) has a significant performance impact on current nanoelectronics systems. To improve SRAM efficiency, it is important to utilize emerging technologies to overcome short-channel effects (SCE) of conventional CMOS. FinFET devices are promising emerging devices that can be utilized to improve the performance of SRAM designs at lower technology nodes. In this thesis, I present detail analysis of SRAM cells using different types of FinFET devices at 7nm technology. From the analysis, it can be concluded that the performance of both 6T and 8T SRAM designs are improved. 6T SRAM achieves a 44.97% improvement in the read energy compared to 8T SRAM. However, 6T SRAM write energy degraded by 3.16% compared to 8T SRAM. Read stability and write ability of SRAM cells are determined using Static Noise Margin and N- curve methods. Moreover, Monte Carlo simulations are performed on the SRAM cells to evaluate process variations. Simulations were done in HSPICE using 7nm Asymmetrical Underlap FinFET technology.
The quasiplanar FinFET structure gained considerable attention because of the ease of the fabrication process [1] – [4]. Scaling of technology have degraded the performance of CMOS designs because of the short channel effects (SCEs) [5], [6]. Therefore, there has been upsurge in demand for FinFET devices for emerging market segments including artificial intelligence and cloud computing (AI) [8], [9], Internet of Things (IoT) [10] – [13] and biomedical [17] –[18] which have their own exclusive style of design. In recent years, many Underlapped FinFET devices were proposed to have better control of the SCEs in the sub-nanometer technologies [3], [4], [19] – [33]. Underlap on either side of the gate increases effective channel length as seen by the charge carriers. Consequently, the source-to-drain tunneling probability is improved. Moreover, edge direct tunneling leakage components can be reduced by controlling the electric field at the gate-drain junction . There is a limitation on the extent of underlap on drain or source sides because the ION is lower for larger underlap. Additionally, FinFET based designs have major width quantization issue. The width of a FinFET device increases only in quanta of silicon fin height (HFIN) [4]. The width quantization issue becomes critical for ratioed designs like SRAMs, where proper sizing of the transistors is essential for fault-free operation. FinFETs based on Design/Technology Co-Optimization (DTCO_F) approach can overcome these issues [38]. DTCO_F follows special design rules, which provides the specifications for the standard SRAM cells with special spacing rules and low leakages. The performances of 6T SRAM designs implemented by different FinFET devices are compared for different pull-up, pull down and pass gate transistor (PU: PD:PG) ratios to identify the best FinFET device for high speed and low power SRAM applications. Underlapped FinFETs (UF) and Design/Technology Co-Optimized FinFETs (DTCO_F) are used for the design and analysis. It is observed that with the PU: PD:PG ratios of 1:1:1 and 1:5:2 for the UF-SRAMs the read energy has degraded by 3.31% and 48.72% compared to the DTCO_F-SRAMs, respectively. However, the read energy with 2:5:2 ratio has improved by 32.71% in the UF-SRAM compared to the DTCO_F-SRAMs. The write energy with 1:1:1 configuration has improved by 642.27% in the UF-SRAM compared to the DTCO_F-SRAM. On the other hand, the write energy with 1:5:2 and 2:5:2 configurations have degraded by 86.26% and 96% in the UF-SRAMs compared to the DTCO_F-SRAMs. The stability and reliability of different SRAMs are also evaluated for 500mV supply. From the analysis, it can be concluded that Asymmetrical Underlapped FinFET is better for high-speed applications and DTCO FinFET for low power applications.Introduction -- Next generation high performance device: FinFET -- FinFET based SRAM bitcell designs -- Benchmarking of UF-SRAMs and DTCO-F-SRAMS -- Collaborative project -- Internship experience at INTEL and Marvell Semiconductor -- Conclusion and future wor
Design Strategies for Ultralow Power 10nm FinFETs
Integrated circuits and microprocessor chips have become integral part of our everyday life to such an extent that it is difficult to imagine a system related to consumer electronics, health care, public transportation, household application without these small components. The heart of these circuits is, the metal oxide field-effect transistor (MOSFET) which is used as a switch. The dimensions of these transistors have been scaled from a few micrometers to few tens of nanometer to achieve higher performance, lower power consumption and low cost of production. According to the International Technology Roadmap for Semiconductors (ITRS), beyond 32 nm technology node, planer devices will not be able to fulfill the strict leakage requirement anymore due to overpowering short channel effects and need of multi-gate transistor is inevitable. The motivation of the thesis therefore is to investigate techniques to engineer threshold voltage of a tri-gate FinFET for low power and ultra-low power applications. The complexity of physics involved in 3D nano- devices encourages use of advanced simulation tools. Thus, Technology Computer Aided Design Tools (TCAD) are needed to perform device optimization and support device and process integration engineers. Below 20nm technology node, the Fin-shaped Field Effect Transistor or Tri-gate transistor requires extensive use of 3D TCAD simulations.
The multi-gate devices such as FinFETs are considered to be one of the most promising devices for Ultra Large Scale Integration (ULSI). This device structural design with additional gate electrodes and channel surfaces offers dynamic threshold voltage control. In addition, it can provide better short channel performance and reduced leakage. In this study, new design strategies for 10nm node NMOS bulk FinFET transistors are investigated to meet low power (LP) (50pA/μ
- …