A novel compact fractal UWB antenna with triple reconfigurable notch reject bands applications

A compact, circular UWB fractal antenna with triple reconfigurable notch rejection bands is proposed. It rejects the crowded frequency bands WiMAX, WLAN and X band interferences produced in UWB communication systems. The proposed fractal structure consists of a basic circular patch with circular fractal iterations. By employing this new structure of fractals, the overall size of antenna is reduced 53% to 21 × 25 mm, in comparison with traditional circular monopole antenna. The implemented antenna operates at 3.1–10 GHz. Re-configurability is realized by designing slots and split ring resonators in desired frequencies with the attached PIN diodes. WLAN band rejection was realized by creating a pair of optimized L-shaped slots in the ground plane. By etching a split ring resonator and a U-shaped slot, X and WiMAX bands were also rejected. Furthermore, by attaching diodes to aforementioned slots and designating the diodes on/off, different bands can be included or rejected. In time domain, the antenna properties are evaluated by a figure of merit called fidelity factor. Finally, the antenna properties are measured in anechoic chamber and the results agrees with simulation findings

A planar UWB semicircular-shaped monopole antenna with quadruple band notch for WiMAX, ARN, WLAN, and X-Band

This paper proposed quadruple notched frequency bands ultra-wideband (UWB) antenna. The antenna is a semicircular-shaped monopole type of a compact size 36x24 mm, covering frequency range of 3.02-14 GHz. Four rejected narrow bands including WiMAX (3.3-3.7GHz), ARN (4.2-4.5 GHz), WLAN (5.15-5.825GHz), X-Band (7.25-7.75) have been achieved using inserting slots techniques in the patch, feed line, and ground plane. The slots dimensions have been optimized for the required reject bands. The antenna design and analysis have been investigated by simulation study using CST-EM software package. The antenna characteristics including impedance bandwidth, surface current, gain, radiation efficiency, radiation pattern have been discussed

A novel SWB antenna with triple band-notches based on elliptical slot and rectangular split ring resonators

In this paper, a wideband antenna was designed for super-wideband (SWB) applications. The proposed antenna was fed with a rectangular tapered microstrip feed line, which operated over a SWB frequency range (1.42 GHz to 50 GHz). The antenna was implemented at a compact size with electrical dimensions of 0.16 ¿ × 0.27 ¿ × 0.0047 ¿ mm3, where ¿ was with respect to the lowest resonance frequency. The proposed antenna prototype was fabricated on a F4B substrate, which had a permittivity of 2.65 and 1 mm thickness. The SWB antenna exhibited an impedance bandwidth of 189% and a bandwidth ratio of 35.2:1. Additionally, the proposed antenna design exhibited three band notch characteristics that were necessary to eradicate interference from WLAN, WiMAX, and X bands in the SWB range. One notch was achieved by etching an elliptical split ring resonator (ESRR) in the radiator and the other two notches were achieved by placing rectangular split ring resonators close to the signal line. The first notch was tuned by incorporating a varactor diode into the ESRR. The prototype was experimentally validated with, with notch and without notch characteristics for SWB applications. The experimental results showed good agreement with simulated results.Postprint (published version

A Review: Circuit Theory of Microstrip Antennas for Dual-, Multi-, and Ultra-Widebands

In this chapter, a review has been presented on dual-band, multiband, and ultra-wideband (UWB). This review has been classified according to antenna feeding and loading of antennas using slots and notch and coplanar structure. Thereafter a comparison of dual-band, multiband, and ultra-wideband antenna has been presented. The basic geometry of patch antenna has been present along with its equivalent circuit diagram. It has been observed that patch antenna geometry for ultra-wideband is difficult to achieve with normal structure. Ultra-wideband antennas are achieved with two or more techniques; mostly UWB antennas are achieved from coplaner structures

A Coplanar Waveguide Fed Hexagonal Shape Ultra Wide Band Antenna with WiMAX and WLAN Band Rejection

In this paper, a coplanar waveguide (CPW) fed hexagonal shape planar antenna has been considered for ultra-wide band (UWB). This antenna is then modified to obtain dual band rejection. The Wireless Local Area Network (WLAN) and Wireless Microwave Access (WiMAX) band rejections are realized by symmetrically incorporating a pair of L-shape slots within the ground plane as well as a couple of I-shape stubs inserted on the bottom side of radiating patch. The proposed antenna has stop bands of 5.05-5.92 GHz and 3.19-3.7 GHz while maintaining the wideband performance from 2.88 - 13.71 GHz with reflection coefficient of ≤ -10 dB. The antenna exhibits satisfactory omni-directional radiation characteristics throughout its operating band. The peak gain varies from 2 dB to 6 dB in the entire UWB frequency regions except at the notch bands. Surface current distributions are used to analyze the effects of the L-slot and I-shape stub. The measured group delay has small variation within the operating band except notch bands and hence the proposed antenna may be suitable for UWB applications

A compact UWB monopole antenna with penta band notched characteristics

A modified rectangular monopole ultra-wideband (UWB) antenna with penta notched frequency bands is presented. An inverted U shaped and slanted U-shaped on the radiating patch are inserted to achieve WiMAX and ARN bands rejection respectively, two mirrored summation Σ-shaped and four mirrored 5-shaped slots are inserted on the partial ground to achieve WLAN and X-band bands rejection respectively, finally rectangular shaped slot with partially open on the feed is inserted to achieve ITU-8 band rejection. The proposed antenna which was simulated has a compact size 30×35×1.6 m3. It is operated with impedance bandwidth 2.8-10.6 GHz at |S11| < −10 dB, that supported UWB bandwidth with filtering the five narrowbands that avoid the possible interference with them. The simulated resonant frequency for notched filters received 3.55, 4.55, 5.53, 7.45, 8.16 GHZ, for WiMAX, ARN, WLAN, X-Band, ITU-8 respectively. The proposed antenna is suitable for wireless communication such as mobile communication and internet of everything (IoE). Throughout this paper, CST-EM software package was used for the design implementation. Surface current distributions for all notched filters were investigated and shown that it is concentrated around the feeding point and the inserted notched slots proving that there is no radiation to the space due to maximum stored electromagnetic energy around each investigated notch slot, proving that the slots play a role of a quarter wavelength transformer which generates for each notched band, maximum gain, and radiation pattern are also investigated

Wideband and UWB antennas for wireless applications. A comprehensive review

A comprehensive review concerning the geometry, the manufacturing technologies, the materials, and the numerical techniques, adopted for the analysis and design of wideband and ultrawideband (UWB) antennas for wireless applications, is presented. Planar, printed, dielectric, and wearable antennas, achievable on laminate (rigid and flexible), and textile dielectric substrates are taken into account. The performances of small, low-profile, and dielectric resonator antennas are illustrated paying particular attention to the application areas concerning portable devices (mobile phones, tablets, glasses, laptops, wearable computers, etc.) and radio base stations. This information provides a guidance to the selection of the different antenna geometries in terms of bandwidth, gain, field polarization, time-domain response, dimensions, and materials useful for their realization and integration in modern communication systems

Polarization Diversity UWB Antennas with and without Notched Bands

Acknowledgement to The Electromagnetics AcademyIn this article, a couple of UWB antennas are presented. These antennas have the shape of two overlapped circles. The presented antennas are polarization diversity antennas with and without dual band reject filters. Measurements show that the antennas work well within the whole UWB. Antennas have practical reflection parameters S11 and S22 lower than −10 dB, practical coupling parameters S12 and S21 lower than −15 dB, an Envelope Correlation Coefficient lower than 0.015 and a diversity gain between 9.97 to 9.99 dB. Simulations of the antennas are done using the CST softwar

UWB Technology

Ultra Wide Band (UWB) technology has attracted increasing interest and there is a growing demand for UWB for several applications and scenarios. The unlicensed use of the UWB spectrum has been regulated by the Federal Communications Commission (FCC) since the early 2000s. The main concern in designing UWB circuits is to consider the assigned bandwidth and the low power permitted for transmission. This makes UWB circuit design a challenging mission in today's community. Various circuit designs and system implementations are published in this book to give the reader a glimpse of the state-of-the-art examples in this field. The book starts at the circuit level design of major UWB elements such as filters, antennas, and amplifiers; and ends with the complete system implementation using such modules