UMTS multi-service uplink capacity and interference statistics of femtocells

The final publication is available at Springer via http://dx.doi.org/10.1007/s11277-012-0860-7In this work, the multiservice uplink capacity of single and multiple femtocells is given. The COST231 multiwall and multifloor indoor propagation model has been used to calculate the indoor propagation loss. Results show that the uplink capacity of a deployed femtocell will reduce by 2 % if two extra femtocells are deployed in the same building higher and lower of it. Results also show that the uplink capacity is slightly affected if there are several femtocells deployed in the buildings around the one at which the femtocell under study is already exists. It is demonstrated that uplink capacity is interference limited if the femtocell is deployed to serve the users in three floors. Results show that the uplink capacity will be interference and noise limited if the femtocell is deployed to serve the users in five floors. Finally, it is found that the effect of the interference due to the uniformly distributed users within the macrocell around the femtocell is insignificant

Open vs Closed Access Femtocells in the Uplink

Femtocells are assuming an increasingly important role in the coverage and capacity of cellular networks. In contrast to existing cellular systems, femtocells are end-user deployed and controlled, randomly located, and rely on third party backhaul (e.g. DSL or cable modem). Femtocells can be configured to be either open access or closed access. Open access allows an arbitrary nearby cellular user to use the femtocell, whereas closed access restricts the use of the femtocell to users explicitly approved by the owner. Seemingly, the network operator would prefer an open access deployment since this provides an inexpensive way to expand their network capabilities, whereas the femtocell owner would prefer closed access, in order to keep the femtocell's capacity and backhaul to himself. We show mathematically and through simulations that the reality is more complicated for both parties, and that the best approach depends heavily on whether the multiple access scheme is orthogonal (TDMA or OFDMA, per subband) or non-orthogonal (CDMA). In a TDMA/OFDMA network, closed-access is typically preferable at high user densities, whereas in CDMA, open access can provide gains of more than 200% for the home user by reducing the near-far problem experienced by the femtocell. The results of this paper suggest that the interests of the femtocell owner and the network operator are more compatible than typically believed, and that CDMA femtocells should be configured for open access whereas OFDMA or TDMA femtocells should adapt to the cellular user density.Comment: 21 pages, 8 figures, 2 tables, submitted to IEEE Trans. on Wireless Communication

Adaptive Power Control Applying to Femtocell

Femtocells are expected to increase network capacity, extend macrocell coverage, and introduce new services. Because Femtocells share the same frequency band with macrocells in many cases, the femtocell base station (BS) must mitigate the interference with macrocells as well as ensure coverage in customer premises. However, conventional femtocell BS transmit power setting have not adequately accounted for the interference with neighbouring macrocell mobile stations (MSs), leading to small femtocell user throughout. In the paper, we describe an adaptive power level setting scheme i.e. Distributed Power Control algorithm to mitigate the interference of MSs in the basis of the received power levels. In DPC, each pair of transmitter (e.g., an MS) and receiver (e.g., the BS) does not need to know the transmit power or channel quality of any other pair. At each time slot, all it needs to know is the actual SIR it currently achieves at the receiver. Then, by taking the ratio between the fixed, target SIR and the variable, actual SIR value measured for this time slot and multiplying the current transmit power by that ratio, we get the transmit power for the next time slot. This update happens simultaneously at each pair of transmitter and receiver. This is how DPC provides adaptive nature to Femtocell

Self-organising network management for heterogeneous LTE-advanced networks

This thesis was submitted for the award of Doctor of Philosophy and awarded by Brunel University LondonSince 2004, when the Long Term Evolution (LTE) was first proposed to be publicly available in the year 2009, a plethora of new characteristics, techniques and applications have been constantly enhancing it since its first release, over the past decade. As a result, the research aims for LTE-Advanced (LTE-A) have been released to create a ubiquitous and supportive network for mobile users. The incorporation of heterogeneous networks (HetNets) has been proposed as one of the main enhancements of LTE-A systems over the existing LTE releases, by proposing the deployment of small-cell applications, such as femtocells, to provide more coverage and quality of service (QoS) within the network, whilst also reducing capital expenditure. These principal advantages can be obtained at the cost of new challenges such as inter-cell interference, which occurs when different network applications share the same frequency channel in the network. In this thesis, the main challenges of HetNets in LTE-A platform have been addressed and novel solutions are proposed by using self-organising network (SON) management approaches, which allows the cooperative cellular systems to observe, decide and amend their ongoing operation based on network conditions. The novel SON algorithms are modelled and simulated in OPNET modeler simulation software for the three processes of resource allocation, mobility management and interference coordination in multi-tier macro-femto networks. Different channel allocation methods based on cooperative transmission, frequency reuse and dynamic spectrum access are investigated and a novel SON sub-channel allocation method is proposed based on hybrid fractional frequency reuse (HFFR) scheme to provide dynamic resource allocation between macrocells and femtocells, while avoiding co-tier and cross-tier interference. Mobility management is also addressed as another important issue in HetNets, especially in hand-ins from macrocell to femtocell base stations. The existing research considers a limited number of methods for handover optimisation, such as signal strength and call admission control (CAC) to avoid unnecessary handovers, while our novel SON handover management method implements a comprehensive algorithm that performs sensing process, as well as resource availability and user residence checks to initiate the handover process at the optimal time. In addition to this, the novel femto over macro priority (FoMP) check in this process also gives the femtocell target nodes priority over the congested macrocells in order to improve the QoS at both the network tiers. Inter-cell interference, as the key challenge of HetNets, is also investigated by research on the existing time-domain, frequency-domain and power control methods. A novel SON interference mitigation algorithm is proposed, which is based on enhanced inter-cell interference coordination (eICIC) with power control process. The 3-phase power control algorithm contains signal to interference plus noise ratio (SINR) measurements, channel quality indicator (CQI) mapping and transmission power amendments to avoid the occurrence of interference due to the effects of high transmission power. The results of this research confirm that if heterogeneous systems are backed-up with SON management strategies, not only can improve the network capacity and QoS, but also the new network challenges such as inter-cell interference can also be mitigated in new releases of LTE-A network

Optimal and practical handover decision algorithms in heteregeneous marco-femto cellular networks

Driven by the smart tablet/phone revolution and the proliferation of bandwidth hungry applications such as cloud computing and streaming video, the demand for high data rate wireless communication is increasing tremendously. In order to meet the increasing demand from subscribers, wireless operators are in the process of augmenting their macrocell network with supplemental infrastructure such as microcells, distributed antennas and relays. An alternative with lower upfront costs is to improve indoor coverage and capacity by using end-consumer installed femtocells. A femtocell is a low power, short range (up to 100 meters coverage radius) cellular wireless access point (AP), functioning in service provider owned licensed spectrum. Due to the proximity of end users to the femtocell access points, APs are able to provide higher end-user QoE and better spatial reuse of limited spectrum. Femtocells are useful in offloading the macro-cellular network as well as reducing the operating and capital expenditure costs for operators. Femtocells coexist with legacy cellular networks consisting of macrocells. In this emerging combined architecture, large number of Femtocell Application Point (FAPs) is randomly deployed in the coverage area of macro BSs. However, several problems related to MM (mobility management) and RM (resource management) in this combined architecture still remain to be solved. The ad hoc deployment of FAPs and asymmetric radio communication and call processing capabilities between macrofemto networks are the primary causes of these problems. Uncoordinated deployment of FAPs providing indoor oriented wireless access service within the macro coverage may cause severe interference problems that need to be mitigated and handled by RM/MM schemes. The MM decisions should take into account the resource constraints and UE mobility in order to prevent unnecessary or undesirable handovers towards femtocells. Ignoring these factors in MM decisions may lead to low customer satisfaction due to mismanagement of handover events in the combined macro-femto network, delayed signaling traffic and unsatisfactory call/connection quality. In order to address all of the aforementioned issues, the handover decision problem in combined femto-macro networks has been formulated as a multi-objective non-linear optimization problem. Since there are no known analytical solution to this problem, an MDP (Markov Decision Process) based heuristic has been proposed as a practical and optimal HO (handover) decision making scheme. This heuristic has been updated and improved in an iterative manner and has also been supported by a dynamic SON (Self Organizing Networks) algorithms that is based on heuristic's components. The performance results show that the final version of MDP based heuristic has signi cantly superior performance in terms offloading the macro network, minimizing the undesirable network events (e.g. outage and admission rejection) when compared to state-of-art handover algorithms

A survey of self organisation in future cellular networks

This article surveys the literature over the period of the last decade on the emerging field of self organisation as applied to wireless cellular communication networks. Self organisation has been extensively studied and applied in adhoc networks, wireless sensor networks and autonomic computer networks; however in the context of wireless cellular networks, this is the first attempt to put in perspective the various efforts in form of a tutorial/survey. We provide a comprehensive survey of the existing literature, projects and standards in self organising cellular networks. Additionally, we also aim to present a clear understanding of this active research area, identifying a clear taxonomy and guidelines for design of self organising mechanisms. We compare strength and weakness of existing solutions and highlight the key research areas for further development. This paper serves as a guide and a starting point for anyone willing to delve into research on self organisation in wireless cellular communication networks

Femtocellular Aspects on UMTS Architecture Evolution

Recent advancement in System Architecture Evolution (SAE) has opened the door for the deployment of femtocells on a large scale. Deployment of femtocells in the existing macrocell networks and in 4G networks will significantly increase because femtocell offers increase coverage and capacity in both home and office environments. Hence it is likely that these low-power home based access points are going to change the landscape of mobile technology and the networking business in the coming years. This thesis work offers a deep insight into the mobile communication system architecture evolution and typically explains femtocellular aspects in the evolution of Universal Mobile Telecommunication System (UMTS) architecture. This research work mainly focuses on architectural variations of 3G and 4G femtocells along with the operational functionality of Local IP Access (LIPA). LIPA introduces the functionality in femtocells to access a home Local Area Network (LAN) and enable customers to use the Internet through Internet-enabled devices. Hence users have the capability to have simultaneous access to the operator's network as well as having access to their own home LAN. The way LIPA works is explained How it can create problems for femtocells deployment and what solutions LIPA offers for providing easy femtocell configurations. With the help of the extensive study about LIPA-enabled femtocells, different scenarios are discussed and two different solutions are proposed both for 3G and 4G femtocells. For maintaining higher data rates, 3G and 4G systems require a good coverage area to increase system performance. But research results suggest that two-thirds of consumers suffer from inadequate indoor signal penetration which actually leads to poor coverage for consumers, who do not enjoy the full data capacity as guaranteed. 4G systems will facilitate high speed data services, but poor coverage and interference will definitely diminish the quality of real-time applications and will significantly slow down high speed data services. The aim of this thesis is to propose di_erent logical indoor 4G femtocell architectures based on 3GPP specifications that will also be capable of providing LIPA functionality