CMOS array design automation techniques

A low cost, quick turnaround technique for generating custom metal oxide semiconductor arrays using the standard cell approach was developed, implemented, tested and validated. Basic cell design topology and guidelines are defined based on an extensive analysis that includes circuit, layout, process, array topology and required performance considerations particularly high circuit speed

Complementary Symmetry Nanowire Logic Circuits: Experimental Demonstrations and in Silico Optimizations

Complementary symmetry (CS) Boolean logic utilizes both p- and n-type field-effect transistors (FETs) so that an input logic voltage signal will turn one or more p- or n-type FETs on, while turning an equal number of n- or p-type FETs off. The voltage powering the circuit is prevented from having a direct pathway to ground, making the circuit energy efficient. CS circuits are thus attractive for nanowire logic, although they are challenging to implement. CS logic requires a relatively large number of FETs per logic gate, the output logic levels must be fully restored to the input logic voltage level, and the logic gates must exhibit high gain and robust noise margins. We report on CS logic circuits constructed from arrays of 16 nm wide silicon nanowires. Gates up to a complexity of an XOR gate (6 p-FETs and 6 n-FETs) containing multiple nanowires per transistor exhibit signal restoration and can drive other logic gates, implying that large scale logic can be implemented using nanowires. In silico modeling of CS inverters, using experimentally derived look-up tables of individual FET properties, is utilized to provide feedback for optimizing the device fabrication process. Based upon this feedback, CS inverters with a gain approaching 50 and robust noise margins are demonstrated. Single nanowire-based logic gates are also demonstrated, but are found to exhibit significant device-to-device fluctuations

Expansion of CMOS array design techniques

The important features of the multiport (double entry) automatic placement and routing programs for standard cells are described. Measured performance and predicted performance were compared for seven CMOS/SOS array types and hybrids designed with the high speed CMOS/SOS cell family. The CMOS/SOS standard cell data sheets are listed and described

A neural probe with up to 966 electrodes and up to 384 configurable channels in 0.13 μm SOI CMOS

In vivo recording of neural action-potential and local-field-potential signals requires the use of high-resolution penetrating probes. Several international initiatives to better understand the brain are driving technology efforts towards maximizing the number of recording sites while minimizing the neural probe dimensions. We designed and fabricated (0.13-μm SOI Al CMOS) a 384-channel configurable neural probe for large-scale in vivo recording of neural signals. Up to 966 selectable active electrodes were integrated along an implantable shank (70 μm wide, 10 mm long, 20 μm thick), achieving a crosstalk of −64.4 dB. The probe base (5 × 9 mm2) implements dual-band recording and a 1

Skybridge: A New Nanoscale 3-D Computing Framework for Future Integrated Circuits

Continuous scaling of CMOS has been the major catalyst in miniaturization of integrated circuits (ICs) and crucial for global socio-economic progress. However, continuing the traditional way of scaling to sub-20nm technologies is proving to be very difficult as MOSFETs are reaching their fundamental performance limits [1] and interconnection bottleneck is dominating IC operational power and performance [2]. Migrating to 3-D, as a way to advance scaling, has been elusive due to inherent customization and manufacturing requirements in CMOS architecture that are incompatible with 3-D organization. Partial attempts with die-die [3] and layer-layer [4] stacking have their own limitations [5]. We propose a new 3-D IC fabric technology, Skybridge [6], which offers paradigm shift in technology scaling as well as design. We co-architect Skybridge’s core aspects, from device to circuit style, connectivity, thermal management, and manufacturing pathway in a 3-D fabric-centric manner, building on a uniform 3-D template. Our extensive bottom-up simulations, accounting for detailed material system structures, manufacturing process, device, and circuit parasitics, carried through for several designs including a designed microprocessor, reveal a 30-60x density, 3.5x performance/watt benefits, and 10x reduction in interconnect lengths vs. scaled 16-nm CMOS [6]. Fabric-level heat extraction features are found to be effective in managing IC thermal profiles in 3-D. This 3-D integrated fabric proposal overcomes the current impasse of CMOS in a manner that can be immediately adopted, and offers unique solution to continue technology scaling in the 21st century

Four-quadrant one-transistor-synapse for high-density CNN implementations

Presents a linear four-quadrants, electrically-programmable, one-transistor synapse strategy applicable to the implementation of general massively-parallel analog processors in CMOS technology. It is specially suited for translationally-invariant processing arrays with local connectivity, and results in a significant reduction in area occupation and power dissipation of the basic processing units. This allows higher integration densities and therefore, permits the integration of larger arrays on a single chip.Comisión Interministerial de Ciencia y Tecnología TIC96-1392-C02-0

Skybridge: 3-D Integrated Circuit Technology Alternative to CMOS

Continuous scaling of CMOS has been the major catalyst in miniaturization of integrated circuits (ICs) and crucial for global socio-economic progress. However, scaling to sub-20nm technologies is proving to be challenging as MOSFETs are reaching their fundamental limits and interconnection bottleneck is dominating IC operational power and performance. Migrating to 3-D, as a way to advance scaling, has eluded us due to inherent customization and manufacturing requirements in CMOS that are incompatible with 3-D organization. Partial attempts with die-die and layer-layer stacking have their own limitations. We propose a 3-D IC fabric technology, Skybridge[TM], which offers paradigm shift in technology scaling as well as design. We co-architect Skybridge's core aspects, from device to circuit style, connectivity, thermal management, and manufacturing pathway in a 3-D fabric-centric manner, building on a uniform 3-D template. Our extensive bottom-up simulations, accounting for detailed material system structures, manufacturing process, device, and circuit parasitics, carried through for several designs including a designed microprocessor, reveal a 30-60x density, 3.5x performance per watt benefits, and 10X reduction in interconnect lengths vs. scaled 16-nm CMOS. Fabric-level heat extraction features are shown to successfully manage IC thermal profiles in 3-D. Skybridge can provide continuous scaling of integrated circuits beyond CMOS in the 21st century.Comment: 53 Page

Baseband analog front-end and digital back-end for reconfigurable multi-standard terminals

Multimedia applications are driving wireless network operators to add high-speed data services such as Edge (E-GPRS), WCDMA (UMTS) and WLAN (IEEE 802.11a,b,g) to the existing GSM network. This creates the need for multi-mode cellular handsets that support a wide range of communication standards, each with a different RF frequency, signal bandwidth, modulation scheme etc. This in turn generates several design challenges for the analog and digital building blocks of the physical layer. In addition to the above-mentioned protocols, mobile devices often include Bluetooth, GPS, FM-radio and TV services that can work concurrently with data and voice communication. Multi-mode, multi-band, and multi-standard mobile terminals must satisfy all these different requirements. Sharing and/or switching transceiver building blocks in these handsets is mandatory in order to extend battery life and/or reduce cost. Only adaptive circuits that are able to reconfigure themselves within the handover time can meet the design requirements of a single receiver or transmitter covering all the different standards while ensuring seamless inter-interoperability. This paper presents analog and digital base-band circuits that are able to support GSM (with Edge), WCDMA (UMTS), WLAN and Bluetooth using reconfigurable building blocks. The blocks can trade off power consumption for performance on the fly, depending on the standard to be supported and the required QoS (Quality of Service) leve