A Comparative Study among Four Controllers Intended for Congestion Control in Computer Networks

Computer networks efficiency is an vital part of today’s information services technology, with this comes multiple issues, among them is the congestion problem. This paper will discuss the designing and evaluating of four controllers to deal with this issue. The design starts with modeling the Transmission Control Protocol /Active Queue Management (TCP/AQM) which is intended for dynamics modeling of the average TCP window size and the queue size in the bottleneck router. Apart from modeling, the work comprises of two parts. In the first, three controllers Random Early Detection, Proportional-Integral and Proportional-Integral-Derivative  (RED, PI, and PID) are designed, tested, evaluated, and compared among each other, with the use of the TCP/AQM model developed. The second part considers designing a fuzzy logic based online tuned PID controller and comparing its performance with a PID controller tuned offline with three tuning methods, Ziegler Nichols (Z-N), Particle Swarm Optimization (PSO), and Ant Colony Optimization (ACO). The Integral Square Error (ISE) is used as the objective function for optimization. The controllers’ performance is evaluated using the following parameters for system’s response, rise time, settling time, and maximum peak overshoot. The performance of the controllers is also examined by applying a disturbance as an exceptional condition. To test and evaluate the controllers, the system as all is implemented using MatLab (Version 2014).  The results obtained indicated that the PID gave a better performance, compared to the RED and the PI, in following changes in the desired queue level, and in reducing the loss of packets. The PID gave a settling time 20% lesser than that of the PI and 60% lesser than that of the RED. Regarding the tuning methods, and under the settings considered for each in this work, the ACO-PID gave the least overshoot (1.545%) compared to the others methods [ZN-PID (40%), PSO-PID (13.85%), Fuzzy-PID (5%)].The PSO and ACO managed to cause great reduction in settling time () and rise time (). The ratios of and  of PSO-PID to PID before tuning are (16.5%), (23.43%) and the ratio of  and  of ACO-PID to PID before tuning are (11.5%), (44.56%). The intelligent tuning methods [PSO & ACO] gave better  and  compared to Fuzzy or Ziegler–Nichols. Despite the indicated relative performance of the Fuzzy PID controller, it has some important privileges. Firstly, it is an online tuning method, as it continuously adapts the PID controllers’ parameters as long as the system is running. Secondly, its performance can still be improved by optimizing the fuzzy part. Thirdly, it represents a nonlinear controller (as its parameters are changing), and so it can even suit the nonlinear model

Novel fuzzy logic controllers with self-tuning capability

Two controllers which extend the PD+I fuzzy logic controller to deal with the plant having time varying nonlinear dynamics are proposed. The adaptation ability of the first self tuning PD+I fuzzy logic controller (STPD+I_31) is achieved by adjusting the output scaling factor automatically thereby contributing to significant improvement in performance. Second controller (STPD+I_9) is the simplified version of STPD+I_31 which is designed under the imposed constraint that allows only minimum number of rules in the rule bases. The proposed controllers are compared with two classical nonlinear controllers: the pole placement self tuning PID controller and sliding mode controller. All the controllers are applied to the two-links revolute robot for the tracking control. The tracking performance of STPD+I_31 and STPD+I_9 are much better than the pole placement self tuning PID controller during high speed motions while the performance are comparable at low and medium speed. In addition, STPD+I_31 and STPD+I_9 outperform sliding mode controller using same method of comparison study

Self-tuning run-time reconfigurable PID controller

Digital PID control algorithm is one of the most commonly used algorithms in the control systems area. This algorithm is very well known, it is simple, easily implementable in the computer control systems and most of all its operation is very predictable. Thus PID control has got well known impact on the control system behavior. However, in its simple form the controller have no reconfiguration support. In a case of the controlled system substantial changes (or the whole control environment, in the wider aspect, for example if the disturbances characteristics would change) it is not possible to make the PID controller robust enough. In this paper a new structure of digital PID controller is proposed, where the policy-based computing is used to equip the controller with the ability to adjust it's behavior according to the environmental changes. Application to the electro-oil evaporator which is a part of distillation installation is used to show the new controller structure in operation

On-line multiobjective automatic control system generation by evolutionary algorithms

Evolutionary algorithms are applied to the on- line generation of servo-motor control systems. In this paper, the evolving population of controllers is evaluated at run-time via hardware in the loop, rather than on a simulated model. Disturbances are also introduced at run-time in order to pro- duce robust performance. Multiobjective optimisation of both PI and Fuzzy Logic controllers is considered. Finally an on-line implementation of Genetic Programming is presented based around the Simulink standard blockset. The on-line designed controllers are shown to be robust to both system noise and ex- ternal disturbances while still demonstrating excellent steady- state and dvnamic characteristics

Intelligent methods for complex systems control engineering

This thesis proposes an intelligent multiple-controller framework for complex systems that incorporates a fuzzy logic based switching and tuning supervisor along with a neural network based generalized learning model (GLM). The framework is designed for adaptive control of both Single-Input Single-Output (SISO) and Multi-Input Multi-Output (MIMO) complex systems. The proposed methodology provides the designer with an automated choice of using either: a conventional Proportional-Integral-Derivative (PID) controller, or a PID structure based (simultaneous) Pole and Zero Placement controller. The switching decisions between the two nonlinear fixed structure controllers is made on the basis of the required performance measure using the fuzzy logic based supervisor operating at the highest level of the system. The fuzzy supervisor is also employed to tune the parameters of the multiple-controller online in order to achieve the desired system performance. The GLM for modelling complex systems assumes that the plant is represented by an equivalent model consisting of a linear time-varying sub-model plus a learning nonlinear sub-model based on Radial Basis Function (RBF) neural network. The proposed control design brings together the dominant advantages of PID controllers (such as simplicity in structure and implementation) and the desirable attributes of Pole and Zero Placement controllers (such as stable set-point tracking and ease of parameters’ tuning). Simulation experiments using real-world nonlinear SISO and MIMO plant models, including realistic nonlinear vehicle models, demonstrate the effectiveness of the intelligent multiple-controller with respect to tracking set-point changes, achieve desired speed of response, prevent system output overshooting and maintain minimum variance input and output signals, whilst penalising excessive control actions

A novel technique for load frequency control of multi-area power systems

In this paper, an adaptive type-2 fuzzy controller is proposed to control the load frequency of a two-area power system based on descending gradient training and error back-propagation. The dynamics of the system are completely uncertain. The multilayer perceptron (MLP) artificial neural network structure is used to extract Jacobian and estimate the system model, and then, the estimated model is applied to the controller, online. A proportional–derivative (PD) controller is added to the type-2 fuzzy controller, which increases the stability and robustness of the system against disturbances. The adaptation, being real-time and independency of the system parameters are new features of the proposed controller. Carrying out simulations on New England 39-bus power system, the performance of the proposed controller is compared with the conventional PI, PID and internal model control based on PID (IMC-PID) controllers. Simulation results indicate that our proposed controller method outperforms the conventional controllers in terms of transient response and stability

Extruder for food product (otak–otak) with heater and roll cutter

Food extrusion is a form of extrusion used in food industries. It is a process by which a set of mixed ingredients are forced through an opening in a perforated plate or die with a design specific to the food, and is then cut to a specified size by blades [1]. Summary of the invention principal objects of the present invention are to provide a machine capable of continuously producing food products having an’ extruded filler material of meat or similarity and an extruded outer covering of a moldable food product, such as otak-otak, that completely envelopes the filler material

The application of a new PID autotuning method for the steam/water loop in large scale ships

In large scale ships, the most used controllers for the steam/water loop are still the proportional-integral-derivative (PID) controllers. However, the tuning rules for the PID parameters are based on empirical knowledge and the performance for the loops is not satisfying. In order to improve the control performance of the steam/water loop, the application of a recently developed PID autotuning method is studied. Firstly, a 'forbidden region' on the Nyquist plane can be obtained based on user-defined performance requirements such as robustness or gain margin and phase margin. Secondly, the dynamic of the system can be obtained with a sine test around the operation point. Finally, the PID controller's parameters can be obtained by locating the frequency response of the controlled system at the edge of the 'forbidden region'. To verify the effectiveness of the new PID autotuning method, comparisons are presented with other PID autotuning methods, as well as the model predictive control. The results show the superiority of the new PID autotuning method