A Channel Ranking And Selection Scheme Based On Channel Occupancy And SNR For Cognitive Radio Systems

Wireless networks and information traffic have grown exponentially over the last decade. Consequently, an increase in demand for radio spectrum frequency bandwidth has resulted. Recent studies have shown that with the current fixed spectrum allocation (FSA), radio frequency band utilization ranges from 15% to 85%. Therefore, there are spectrum holes that are not utilized all the time by the licensed users, and, thus the radio spectrum is inefficiently exploited. To solve the problem of scarcity and inefficient utilization of the spectrum resources, dynamic spectrum access has been proposed as a solution to enable sharing and using available frequency channels. With dynamic spectrum allocation (DSA), unlicensed users can access and use licensed, available channels when primary users are not transmitting. Cognitive Radio technology is one of the next generation technologies that will allow efficient utilization of spectrum resources by enabling DSA. However, dynamic spectrum allocation by a cognitive radio system comes with the challenges of accurately detecting and selecting the best channel based on the channelâs availability and quality of service. Therefore, the spectrum sensing and analysis processes of a cognitive radio system are essential to make accurate decisions. Different spectrum sensing techniques and channel selection schemes have been proposed. However, these techniques only consider the spectrum occupancy rate for selecting the best channel, which can lead to erroneous decisions. Other communication parameters, such as the Signal-to-Noise Ratio (SNR) should also be taken into account. Therefore, the spectrum decision-making process of a cognitive radio system must use techniques that consider spectrum occupancy and channel quality metrics to rank channels and select the best option. This thesis aims to develop a utility function based on spectrum occupancy and SNR measurements to model and rank the sensed channels. An evolutionary algorithm-based SNR estimation technique was developed, which enables adaptively varying key parameters of the existing Eigenvalue-based blind SNR estimation technique. The performance of the improved technique is compared to the existing technique. Results show the evolutionary algorithm-based estimation performing better than the existing technique. The utility-based channel ranking technique was developed by first defining channel utility function that takes into account SNR and spectrum occupancy. Different mathematical functions were investigated to appropriately model the utility of SNR and spectrum occupancy rate. A ranking table is provided with the utility values of the sensed channels and compared with the usual occupancy rate based channel ranking. According to the results, utility-based channel ranking provides a better scope of making an informed decision by considering both channel occupancy rate and SNR. In addition, the efficiency of several noise cancellation techniques was investigated. These techniques can be employed to get rid of the impact of noise on the received or sensed signals during spectrum sensing process of a cognitive radio system. Performance evaluation of these techniques was done using simulations and the results show that the evolutionary algorithm-based noise cancellation techniques, particle swarm optimization and genetic algorithm perform better than the regular gradient descent based technique, which is the least-mean-square algorithm

Performance analysis of energy detector over generalised wireless channels in cognitive radio

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University London.This thesis extensively analyses the performance of an energy detector which is widely employed to perform spectrum sensing in cognitive radio over different generalised channel models. In this analysis, both the average probability of detection and the average area under the receiver operating characteristic curve (AUC) are derived using the probability density function of the received instantaneous signal to noise ratio (SNR). The performance of energy detector over an ŋ --- µ fading, which is used to model the Non-line-of-sight (NLoS) communication scenarios is provided. Then, the behaviour of the energy detector over к --- µ shadowed fading channel, which is a composite of generalized multipath/shadowing fading channel to model the lineof- sight (LoS) communication medium is investigated. The analysis of the energy detector over both ŋ --- µ and к --- µ shadowed fading channels are then extended to include maximal ratio combining (MRC), square law combining (SLC) and square law selection (SLS) with independent and non-identically (i:n:d) diversity branches. To overcome the problem of mathematical intractability in analysing the energy detector over i:n:d composite fading channels with MRC and selection combining (SC), two different unified statistical properties models for the sum and the maximum of mixture gamma (MG) variates are derived. The first model is limited by the value of the shadowing severity index, which should be an integer number and has been employed to study the performance of energy detector over composite α --- µ /gamma fading channel. This channel is proposed to represent the non-linear prorogation environment. On the other side, the second model is general and has been utilised to analyse the behaviour of energy detector over composite ŋ --- µ /gamma fading channel. Finally, a special filter-bank transform which is called slantlet packet transform (SPT) is developed and used to estimate the uncertain noise power. Moreover, signal denoising based on hybrid slantlet transform (HST) is employed to reduce the noise impact on the performance of energy detector. The combined SPT-HST approach improves the detection capability of energy detector with 97% and reduces the total computational complexity by nearly 19% in comparison with previously implemented work using filter-bank transforms. The aforementioned percentages are measured at specific SNR, number of selected samples and levels of signal decompositionMartyrs Foundatio

Multiband Spectrum Access: Great Promises for Future Cognitive Radio Networks

Cognitive radio has been widely considered as one of the prominent solutions to tackle the spectrum scarcity. While the majority of existing research has focused on single-band cognitive radio, multiband cognitive radio represents great promises towards implementing efficient cognitive networks compared to single-based networks. Multiband cognitive radio networks (MB-CRNs) are expected to significantly enhance the network's throughput and provide better channel maintenance by reducing handoff frequency. Nevertheless, the wideband front-end and the multiband spectrum access impose a number of challenges yet to overcome. This paper provides an in-depth analysis on the recent advancements in multiband spectrum sensing techniques, their limitations, and possible future directions to improve them. We study cooperative communications for MB-CRNs to tackle a fundamental limit on diversity and sampling. We also investigate several limits and tradeoffs of various design parameters for MB-CRNs. In addition, we explore the key MB-CRNs performance metrics that differ from the conventional metrics used for single-band based networks.Comment: 22 pages, 13 figures; published in the Proceedings of the IEEE Journal, Special Issue on Future Radio Spectrum Access, March 201

A Cognitive Radio Compressive Sensing Framework

With the proliferation of wireless devices and services, allied with further significant predicted growth, there is an ever increasing demand for higher transmission rates. This is especially challenging given the limited availability of radio spectrum, and is further exacerbated by a rigid licensing regulatory regime. Spectrum however, is largely underutilized and this has prompted regulators to promote the concept of opportunistic spectrum access. This allows unlicensed secondary users to use bands which are licensed to primary users, but are currently unoccupied, so leading to more efficient spectrum utilization. A potentially attractive solution to this spectrum underutilisation problem is cognitive radio (CR) technology, which enables the identification and usage of vacant bands by continuously sensing the radio environment, though CR enforces stringent timing requirements and high sampling rates. Compressive sensing (CS) has emerged as a novel sampling paradigm, which provides the theoretical basis to resolve some of these issues, especially for signals exhibiting sparsity in some domain. For CR-related signals however, existing CS architectures such as the random demodulator and compressive multiplexer have limitations in regard to the signal types used, spectrum estimation methods applied, spectral band classification and a dependence on Fourier domain based sparsity. This thesis presents a new generic CS framework which addresses these issues by specifically embracing three original scientific contributions: i) seamless embedding of the concept of precolouring into existing CS architectures to enhance signal sparsity for CR-related digital modulation schemes; ii) integration of the multitaper spectral estimator to improve sparsity in CR narrowband modulation schemes; and iii) exploiting sparsity in an alternative, non-Fourier (Walsh-Hadamard) domain to expand the applicable CR-related modulation schemes. Critical analysis reveals the new CS framework provides a consistently superior and robust solution for the recovery of an extensive set of currently employed CR-type signals encountered in wireless communication standards. Significantly, the generic and portable nature of the framework affords the opportunity for further extensions into other CS architectures and sparsity domains

Development of self-organizing methods for radio spectrum sensing

A problem of wide-band radio spectrum analysis in real time was solved and presented in the dissertation. The goal of the work was to develop a spectrum sensing method for primary user emission detection in radio spectrum by investigating new signal feature extraction and intelligent decision making techniques. A solution of this problem is important for application in cognitive radio systems, where radio spectrum is analyzed in real time. In thesis there are reviewed currently suggested spectrum analysis methods, which are used for cognitive radio. The main purpose of these methods is to optimize spectrum description feature estimation in real-time systems and to select suitable classification threshold. For signal spectrum description analyzed methods used signal energy estimation, analyzed energy statistical difference in time and frequency. In addition, the review has shown that the wavelet transform can be used for signal pre-processing in spectrum sensors. For classification threshold selection in literature most common methods are based on statistical noise estimate and energy statistical change analysis. However, there are no suggested efficient methods, which let classification threshold to change adaptively, when RF environment changes. It were suggested signal features estimation modifications, which let to increase the efficiency of algorithm implementation in embedded system, by decreasing the amount of required calculations and preserving the accuracy of spectrum analysis algorithms. For primary signal processing it is suggested to use wavelet transform based features extraction, which are used for spectrum sensors and lets to increase accuracy of noisy signal detection. All primary user signal emissions were detected with lower than 1% false alarm ratio. In dissertation, there are suggested artificial neural network based methods, which let adaptively select classification threshold for the spectrum sensors. During experimental tests, there was achieved full signals emissions detection with false alarm ratio lower than 1%. It was suggested self organizing map structure modification, which increases network self-training speed up to 32 times. This self-training speed is achieved due to additional inner weights, which are added in to self organizing map structure. In self-training stage network structure changes especially fast and when topology, which is suited for given task, is reached, in further self-training iterations it can be disordered. In order to avoid this over-training, self-training process monitoring algorithms must be used. There were suggested original methods for self-training process control, which let to avoid network over-training and decrease self-training iteration quantity

Sub-Nyquist Sampling: Bridging Theory and Practice

Sampling theory encompasses all aspects related to the conversion of continuous-time signals to discrete streams of numbers. The famous Shannon-Nyquist theorem has become a landmark in the development of digital signal processing. In modern applications, an increasingly number of functions is being pushed forward to sophisticated software algorithms, leaving only those delicate finely-tuned tasks for the circuit level. In this paper, we review sampling strategies which target reduction of the ADC rate below Nyquist. Our survey covers classic works from the early 50's of the previous century through recent publications from the past several years. The prime focus is bridging theory and practice, that is to pinpoint the potential of sub-Nyquist strategies to emerge from the math to the hardware. In that spirit, we integrate contemporary theoretical viewpoints, which study signal modeling in a union of subspaces, together with a taste of practical aspects, namely how the avant-garde modalities boil down to concrete signal processing systems. Our hope is that this presentation style will attract the interest of both researchers and engineers in the hope of promoting the sub-Nyquist premise into practical applications, and encouraging further research into this exciting new frontier.Comment: 48 pages, 18 figures, to appear in IEEE Signal Processing Magazin

A robust modulation classification method using convolutional neural networks

Automatic modulation classification (AMC) is a core technique in noncooperative communication systems. In particular, feature-based (FB) AMC algorithms have been widely studied. Current FB AMC methods are commonly designed for a limited set of modulation and lack of generalization ability; to tackle this challenge, a robust AMC method using convolutional neural networks (CNN) is proposed in this paper. In total, 15 different modulation types are considered. The proposed method can classify the received signal directly without feature extracion, and it can automatically learn features from the received signals. The features learned by the CNN are presented and analyzed. The robust features of the received signals in a specific SNR range are studied. The accuracy of classification using CNN is shown to be remarkable, particularly for low SNRs. The generalization ability of robust features is also proven to be excellent using the support vector machine (SVM). Finally, to help us better understand the process of feature learning, some outputs of intermediate layers of the CNN are visualized

Intelligent Circuits and Systems

ICICS-2020 is the third conference initiated by the School of Electronics and Electrical Engineering at Lovely Professional University that explored recent innovations of researchers working for the development of smart and green technologies in the fields of Energy, Electronics, Communications, Computers, and Control. ICICS provides innovators to identify new opportunities for the social and economic benefits of society.　 This conference bridges the gap between academics and R&D institutions, social visionaries, and experts from all strata of society to present their ongoing research activities and foster research relations between them. It provides opportunities for the exchange of new ideas, applications, and experiences in the field of smart technologies and finding global partners for future collaboration. The ICICS-2020 was conducted in two broad categories, Intelligent Circuits & Intelligent Systems and Emerging Technologies in Electrical Engineering