Recent Advances in Wireless Communications and Networks

This book focuses on the current hottest issues from the lowest layers to the upper layers of wireless communication networks and provides "real-time" research progress on these issues. The authors have made every effort to systematically organize the information on these topics to make it easily accessible to readers of any level. This book also maintains the balance between current research results and their theoretical support. In this book, a variety of novel techniques in wireless communications and networks are investigated. The authors attempt to present these topics in detail. Insightful and reader-friendly descriptions are presented to nourish readers of any level, from practicing and knowledgeable communication engineers to beginning or professional researchers. All interested readers can easily find noteworthy materials in much greater detail than in previous publications and in the references cited in these chapters

COMPLEX PULSE FORMING TEACHNIQUE USING AM DETECTOR TYPE CIRCUITRY AND THE APPLICATION OF CDMA TO RFID FOR THE SIMULTANEOUS READING OF MULTIPLE TAGS

A novel complex ultra wideband RF pulse forming technique has been implemented in this research, using the coefficients derived from discrete Fourier transform of a virtual pulse train. Incorporated in this technique is a multiple frequency communication systems designed such that transmitter receiver proximity and the fading effect of the individual frequencies make part of a corresponding modulation technique. A code division multiple access (CDMA) application to RFID to greatly reduce read time, while at the same time eliminating inter tag interference, has been investigated with the analysis of a typical cart aisle scenario. With the current rate of growth of inventory world wide there is a tremendous need for more efficient method of data gathering, data storage, and data retrieval. In this dissertation, the application of the CDMA RFID technology has been analyzed to demonstrate the potentials of integrating the RFID technology to the EPC global numbering system

Resource Allocation for Energy Harvesting Communications

With the rapid development of energy harvesting technologies, a new paradigm of wireless communications that employs energy harvesting transmitters has become a reality. The renewable energy source enables the flexible deployment of the transmitters and prolongs their lifetimes. To make the best use of the harvested energy, many challenging research issues arise from the new paradigm of communications. In particular, optimal resource (energy, bandwidth, etc.) allocation is key to the design of an efficient wireless system powered by renewable energy sources. In this thesis, we focus on several resource allocation problems for energy harvesting communications, including the energy allocation for a single energy harvesting transmitter, and the joint energy and spectral resource allocation for energy harvesting networks. More specifically, the resource allocation problems discussed in this thesis are summarized as follows. We solve the problem of designing an affordable optimal energy allocation strategy for the system of energy harvesting active networked tags (EnHANTs), that is adapted to the identification request and the energy harvesting dynamic. We formulate a Markov decision process (MDP) problem to optimize the overall system performance which takes into consideration of both the system activity-time and the communication reliability. To solve the problem, both a static exhaustive search method and a modified policy iteration algorithm are employed to obtain the optimal energy allocation policy. We develop an energy allocation algorithm to maximize the achievable rate for an access-controlled energy harvesting transmitter based on causal observations of the channel fading states. We formulate the stochastic optimization problem as a Markov decision process (MDP) with continuous states and define an approximate value function based on a piecewise linear fit in terms of the battery state. We show that with the approximate value function, the update in each iteration consists of a group of convex problems with a continuous parameter and we derive the optimal solution to these convex problems in closed-form. Specifically, the computational complexity of the proposed algorithm is significantly lower than that of the standard discrete MDP method. We propose an efficient iterative algorithm to obtain the optimal energy-bandwidth allocation for multiple flat-fading point-to-point channels, maximizing the weighted sum-rate given the predictions of the energy and channel state. For the special case that each transmitter only communicates with one receiver and the objective is to maximize the total throughput, we develop efficient algorithms for optimally solving the subproblems involved in the iterative algorithm. Moreover, a heuristic algorithm is also proposed for energy-bandwidth allocation based on the causal energy and channel observations. We consider the energy-bandwidth allocation problem in multiple orthogonal and non-orthogonal flat-fading broadcast channels to maximize the weighted sum-rate given the predictions of energy and channel states. To efficiently obtain the optimal allocation, we extend the iterative algorithm originally proposed for multiple flat-fading point-to-point channels and further develop the optimal algorithms to solve the corresponding subproblems. For the orthogonal broadcast channel, the proportionally-fair (PF) throughput maximization problem is formulated and we derive the equivalence conditions such that the optimal solution can be obtained by solving a weighted throughput maximization problem. The algorithm to obtain the proper weights is also proposed. We consider the energy-subchannel allocation problem for energy harvesting networks in frequency-selective fading channels. We first assume that the harvested energy and subchannel gains can be predicted and propose an algorithm to efficiently obtain the energy-subchannel allocations for all links over the scheduling period based on controlled water-filling. The proposed algorithm is shown to be asymptotically optimal when the bandwidth of the subchannel goes to zero. A causal algorithm is also proposed based on the Q-learning technique that makes use of the statistics of the energy harvesting and channel fading processes

Security and Privacy for Modern Wireless Communication Systems

The aim of this reprint focuses on the latest protocol research, software/hardware development and implementation, and system architecture design in addressing emerging security and privacy issues for modern wireless communication networks. Relevant topics include, but are not limited to, the following: deep-learning-based security and privacy design; covert communications; information-theoretical foundations for advanced security and privacy techniques; lightweight cryptography for power constrained networks; physical layer key generation; prototypes and testbeds for security and privacy solutions; encryption and decryption algorithm for low-latency constrained networks; security protocols for modern wireless communication networks; network intrusion detection; physical layer design with security consideration; anonymity in data transmission; vulnerabilities in security and privacy in modern wireless communication networks; challenges of security and privacy in node–edge–cloud computation; security and privacy design for low-power wide-area IoT networks; security and privacy design for vehicle networks; security and privacy design for underwater communications networks

Wireless Device Authentication Techniques Using Physical-Layer Device Fingerprint

Due to the open nature of the radio signal propagation medium, wireless communication is inherently more vulnerable to various attacks than wired communication. Consequently, communication security is always one of the critical concerns in wireless networks. Given that the sophisticated adversaries may cover up their malicious behaviors through impersonation of legitimate devices, reliable wireless authentication is becoming indispensable to prevent such impersonation-based attacks through verification of the claimed identities of wireless devices. Conventional wireless authentication is achieved above the physical layer using upper-layer identities and key-based cryptography. As a result, user authenticity can even be validated for the malicious attackers using compromised security key. Recently, many studies have proven that wireless devices can be authenticated by exploiting unique physical-layer characteristics. Compared to the key-based approach, the possession of such physical-layer characteristics is directly associated with the transceiver\u27s unique radio-frequency hardware and corresponding communication environment, which are extremely difficult to forge in practice. However, the reliability of physical-layer authentication is not always high enough. Due to the popularity of cooperative communications, effective implementation of physical-layer authentication in wireless relay systems is urgently needed. On the other hand, the integration with existing upper-layer authentication protocols still has many challenges, e.g., end-to-end authentication. This dissertation is motivated to develop novel physical-layer authentication techniques in addressing the aforementioned challenges. In achieving enhanced wireless authentication, we first specifically identify the technique challenges in authenticating cooperative amplify-and-forward (AF) relay. Since AF relay only works at the physical layer, all of the existing upper-layer authentication protocols are ineffective in identifying AF relay nodes. To solve this problem, a novel device fingerprint of AF relay consisting of wireless channel gains and in-phase and quadrature imbalances (IQI) is proposed. Using this device fingerprint, satisfactory authentication accuracy is achieved when the signal-to-noise ratio is high enough. Besides, the optimal AF relay identification system is studied to maximize the performance of identifying multiple AF relays in the low signal-to-noise regime and small IQI. The optimal signals for quadrature amplitude modulation and phase shift keying modulations are derived to defend against the repeated access attempts made by some attackers with specific IQIs. Exploring effective authentication enhancement technique is another key objective of this dissertation. Due to the fast variation of channel-based fingerprints as well as the limited range of device-specific fingerprints, the performance of physical-layer authentication is not always reliable. In light of this, the physical-layer authentication is enhanced in two aspects. On the one hand, the device fingerprinting can be strengthened by considering multiple characteristics. The proper characteristics selection strategy, measurement method and optimal weighted combination of the selected characteristics are investigated. On the other hand, the accuracy of fingerprint estimation and differentiation can be improved by exploiting diversity techniques. To be specific, cooperative diversity in the form of involving multiple collaborative receivers is used in differentiating both frequency-dependent and frequency-independent device fingerprints. As a typical combining method of the space diversity techniques, the maximal-ratio combining is also applied in the receiver side to combat the channel degeneration effect and increase the fingerprint-to-noise ratio. Given the inherent weaknesses of the widely utilized upper-layer authentication protocols, it is straightforward to consider physical-layer authentication as an effective complement to reinforce existing authentication schemes. To this end, a cross-layer authentication is designed to seamlessly integrate the physical-layer authentication with existing infrastructures and protocols. The specific problems such as physical-layer key generation as well as the end-to-end authentication in networks are investigated. In addition, the authentication complexity reduction is also studied. Through prediction, pre-sharing and reusing the physical-layer information, the authentication processing time can be significantly shortened

Energy-efficient diversity combining for different access schemes in a multi-path dispersive channel

Dissertação para obtenção do Grau de Doutor em Engenharia Electrotécnica e ComputadoresThe forthcoming generation of mobile communications, 5G, will settle a new standard for a larger bandwidth and better Quality of Service (QoS). With the exploding growth rate of user generated data, wireless standards must cope with this growth and at the same time be energy efficient to avoid depleting the batteries of wireless devices. Besides these issues, in a broadband wireless setting QoS can be severely affected from a multipath dispersive channel and therefore be energy demanding. Cross-layered architectures are a good choice to enhance the overall performance of a wireless system. Examples of cross-layered Physical (PHY) - Medium Access Control (MAC) architectures are type-II Diversity Combining (DC) Hybrid-ARQ (H-ARQ) and Multi-user Detection (MUD) schemes. Cross-layered type-II DC H-ARQ schemes reuse failed packet transmissions to enhance data reception on posterior retransmissions; MUD schemes reuse data information from previously collided packets on posterior retransmissions to enhance data reception. For a multipath dispersive channel, a PHY layer analytical model is proposed for Single-Carrier with Frequency Domain Equalization (SC-FDE) that supports DC H-ARQ and MUD. Based on this analytical model, three PHY-MAC protocols are proposed. A crosslayered Time Division Multiple Access (TDMA) scheme that uses DC H-ARQ is modeled and its performance is studied in this document; the performance analysis shows that the scheme performs better with DC and achieves a better energy efficiency at the cost of a higher delay. A novel cross-layered prefix-assisted Direct-Sequence Code Division Multiple Access (DS-CDMA) scheme is proposed and modeled in this document, it uses principles of DC and MUD. This protocol performs better by means of additional retransmissions, achieving better energy efficiency, at the cost of higher redundancy from a code spreading gain. Finally, a novel cross-layered protocol H-ARQ Network Division Multiple Access (H-NDMA) is proposed and modeled, where the combination of DC H-ARQ and MUD is used with the intent of maximizing the system capacity with a lower delay; system results show that the proposed scheme achieves better energy efficiency and a better performance at the cost of a higher number of retransmissions. A comparison of the three cross-layered protocols is made, using the PHY analytical model, under normalized conditions using the same amount of maximum redundancy. Results show that the H-NDMA protocol, in general, obtains the best results, achieving a good performance and a good energy efficiency for a high channel load and low Signal-to-Noise Ratio (SNR). TDMA with DC H-ARQ achieves the best energy efficiency, although presenting the worst delay. Prefix-assisted DS-CDMA in the other hand shows good delay results but presents the worst throughput and energy efficiency

Exploiting radio interference for human sensing and communications

Wireless devices are now widely deployed in all indoor spaces including homes, offices, shopping malls, etc. In these spaces, we are ubiquitously enveloped by radio spectrum. The presence of various objects such as furniture, walls and human bodies influences the radio wave propagations in numerous ways owing to reflection and diffraction of the wireless signals. As a result, the signals from multiple propagation paths may overlap in constructive and destructive ways which results in radio interference. Interference is normally construed to be undesirable, since it adversely affects the signal quality at the receiver node. Thus various techniques have been proposed in literature to minimise the effects of interference. In this thesis, on the contrary, we show that radio interference can be used to our advantage in the context of two distinct application domains: (i) device-free human sensing and (ii) multi-hop communications. First, we show that WiFi signals can be used to uniquely identify people. There is strong evidence to suggest that all humans have unique gait patterns. While walking in vicinity of WiFi devices, an individual will interfere with the radio propagations and create unique perturbations in the WiFi spectrum. The unique features that are representative of the gait of the individual are extracted to identify the person. We conduct extensive experiments to demonstrate the proposed system can uniquely identify people with an average accuracy of 93% to 77% from a group comprised of 2 to 6 people. Second, we propose a system that is able to monitor breathing rate in a natural setting where the individual can perform actions such as reading, writing, using their phone, etc. We observe breathing and accompanying actions create both constructive and destructive interference. Certain specific subcarriers carry strong imprints of the subtle chest motions that occur during breathing because of the frequency and spacial diversity of MIMO technology that is employed in the state-of-the-art WiFi devices. Our proposed methods are used to identify those subcarriers and precisely isolate the breathing signals. We implement both previous works on commercial off-the-shelf WiFi devices and exploit Channel State Information (CSI) of WiFi signals to extract the patterns for human identification and breath rate monitoring in RF spectrum. Third, we propose a novel point-to-point communication protocol, which exploit the benefits of constructive interference in order to enhance communication reliability and reduce energy consumption. The proposed protocol attempts to discover the most reliable and energy efficient route between a source and a destination. To achieve this objective, the proposed algorithm identifies direct routes and selects helper nodes to ensure reliable communications while allowing all other devices in the network to power down. During data transmissions, the selected nodes can exploit the benefits of constructive interference to increase received signal strength and enhance reliability. Extensive experiments show the proposed method can save energy consumption by up to 82.5% compared to a state-of-the-art approach whilst achieving similar end-to-end transmission reliability