Optimized Design of Survivable MPLS over Optical Transport Networks. Optical Switching and Networking

In this paper we study different options for the survivability implementation in MPLS over Optical Transport Networks in terms of network resource usage and configuration cost. We investigate two approaches to the survivability deployment: single layer and multilayer survivability and present various methods for spare capacity allocation (SCA) to reroute disrupted traffic. The comparative analysis shows the influence of the traffic granularity on the survivability cost: for high bandwidth LSPs, close to the optical channel capacity, the multilayer survivability outperforms the single layer one, whereas for low bandwidth LSPs the single layer survivability is more cost-efficient. For the multilayer survivability we demonstrate that by mapping efficiently the spare capacity of the MPLS layer onto the resources of the optical layer one can achieve up to 22% savings in the total configuration cost and up to 37% in the optical layer cost. Further savings (up to 9 %) in the wavelength use can be obtained with the integrated approach to network configuration over the sequential one, however, at the increase in the optimization problem complexity. These results are based on a cost model with actual technology pricing and were obtained for networks targeted to a nationwide coverage

Energy management in communication networks: a journey through modelling and optimization glasses

The widespread proliferation of Internet and wireless applications has produced a significant increase of ICT energy footprint. As a response, in the last five years, significant efforts have been undertaken to include energy-awareness into network management. Several green networking frameworks have been proposed by carefully managing the network routing and the power state of network devices. Even though approaches proposed differ based on network technologies and sleep modes of nodes and interfaces, they all aim at tailoring the active network resources to the varying traffic needs in order to minimize energy consumption. From a modeling point of view, this has several commonalities with classical network design and routing problems, even if with different objectives and in a dynamic context. With most researchers focused on addressing the complex and crucial technological aspects of green networking schemes, there has been so far little attention on understanding the modeling similarities and differences of proposed solutions. This paper fills the gap surveying the literature with optimization modeling glasses, following a tutorial approach that guides through the different components of the models with a unified symbolism. A detailed classification of the previous work based on the modeling issues included is also proposed

Optimizing IGP Link Costs for Improving IP-level Resilience

Recently, major vendors have introduced new router platforms to the market that support fast IP-level failure pro- tection out of the box. The implementations are based on the IP Fast ReRoute–Loop Free Alternates (LFA) standard. LFA is simple, unobtrusive, and easily deployable. This simplicity, however, comes at a severe price, in that LFA usually cannot protect all possible failure scenarios. In this paper, we give new graph theoretical tools for analyzing LFA failure case coverage and we seek ways for improvement. In particular, we investigate how to optimize IGP link costs to maximize the number of protected failure scenarios, we show that this problem is NP- complete even in a very restricted formulation, and we give exact and approximate algorithms to solve it. Our simulation studies show that a deliberate selection of IGP costs can bring many networks close to complete LFA-based protection

Spare capacity modelling and its applications in survivable iP-over-optical networks

As the interest in IP-over-optical networks are becoming the preferred core network architecture, survivability has emerged as a major concern for network service providers; a result of the potentially huge traffic volumes that will be supported by optical infrastructure. Therefore, implementing recovery strategies is critical. In addition to the traditional recovery schemes based around protection and restoration mechanisms, pre-allocated restoration represents a potential candidate to effect and maintain network resilience under failure conditions. Preallocated restoration technique is particularly interesting because it provides a trade-off in terms of recovery performance and resources between protection and restoration schemes. In this paper, the pre-allocated restoration performance is investigated under single and dual-link failures considering a distributed GMPLSbased IP/WDM mesh network. Two load-based spare capacity optimisation methods are proposed in this paper; Local Spare Capacity Optimisation (LSCO) and Global Spare Capacity Optimisation (GSCO)

Recursive SDN for Carrier Networks

Control planes for global carrier networks should be programmable (so that new functionality can be easily introduced) and scalable (so they can handle the numerical scale and geographic scope of these networks). Neither traditional control planes nor new SDN-based control planes meet both of these goals. In this paper, we propose a framework for recursive routing computations that combines the best of SDN (programmability) and traditional networks (scalability through hierarchy) to achieve these two desired properties. Through simulation on graphs of up to 10,000 nodes, we evaluate our design's ability to support a variety of routing and traffic engineering solutions, while incorporating a fast failure recovery mechanism