Underwater acoustic communications and adaptive signal processing

This dissertation proposes three new algorithms for underwater acoustic wireless communications. One is a new tail-biting circular MAP decoder for full tail-biting convolution (FTBC) codes for very short data blocks intended for Internet of Underwater Things (IoUT). The proposed algorithm was evaluated by ocean experiments and computer simulations on both Physical (PHY) and Media access control (MAC) layers. The ocean experimental results show that without channel equalization, the full tail-biting convolution (FTBC) codes with short packet lengths not only can perform similarly to zero-tailing convolution (ZTC) codes in terms of bit error rate (BER) in the PHY layer. Computer simulation results show that the FTBC codes outperform the ZTC codes in terms of MAC layer metrics, such as collision rate and bandwidth utilization, in a massive network of battery powered IoUT devices. Second, this dissertation also proposes a new approach to utilizing the underwater acoustic (UWA) wireless communication signals acquired in a real-world experiment as a tool for evaluating new coding and modulation schemes in realistic doubly spread UWA channels. This new approach, called passband data reuse, provides detailed procedures for testing the signals under test (SUT) that change or add error correction coding, change bit to symbol mapping (baseband modulation) schemes from a set of original experimental data --Abstract, page iv

Threshold Saturation for Spatially Coupled Turbo-like Codes over the Binary Erasure Channel

In this paper we prove threshold saturation for spatially coupled turbo codes (SC-TCs) and braided convolutional codes (BCCs) over the binary erasure channel. We introduce a compact graph representation for the ensembles of SC-TC and BCC codes which simplifies their description and the analysis of the message passing decoding. We demonstrate that by few assumptions in the ensembles of these codes, it is possible to rewrite their vector recursions in a form which places these ensembles under the category of scalar admissible systems. This allows us to define potential functions and prove threshold saturation using the proof technique introduced by Yedla et al..Comment: 5 pages, 3figure

Design and Analysis of Graph-based Codes Using Algebraic Lifts and Decoding Networks

Error-correcting codes seek to address the problem of transmitting information efficiently and reliably across noisy channels. Among the most competitive codes developed in the last 70 years are low-density parity-check (LDPC) codes, a class of codes whose structure may be represented by sparse bipartite graphs. In addition to having the potential to be capacity-approaching, LDPC codes offer the significant practical advantage of low-complexity graph-based decoding algorithms. Graphical substructures called trapping sets, absorbing sets, and stopping sets characterize failure of these algorithms at high signal-to-noise ratios. This dissertation focuses on code design for and analysis of iterative graph-based message-passing decoders. The main contributions of this work include the following: the unification of spatially-coupled LDPC (SC-LDPC) code constructions under a single algebraic graph lift framework and the analysis of SC-LDPC code construction techniques from the perspective of removing harmful trapping and absorbing sets; analysis of the stopping and absorbing set parameters of hypergraph codes and finite geometry LDPC (FG-LDPC) codes; the introduction of multidimensional decoding networks that encode the behavior of hard-decision message-passing decoders; and the presentation of a novel Iteration Search Algorithm, a list decoder designed to improve the performance of hard-decision decoders. Adviser: Christine A. Kelle

Novel Methods in the Improvement of Turbo Codes and their Decoding

The performance of turbo codes can often be improved by improving the weight spectra of such codes. Methods of producing the weight spectra of turbo codes have been investigated and many improvements were made to refine the techniques. A much faster method of weight spectrum evaluation has been developed that allows calculation of weight spectra within a few minutes on a typical desktop PC. Simulation results show that new high performance turbo codes are produced by the optimisation methods presented. The two further important areas of concern are the code itself and the decoding. Improvements of the code are accomplished through optimisation of the interleaver and choice of constituent coders. Optimisation of interleaves can also be accomplished automatically using the algorithms described in this work. The addition of a CRC as an outer code proved to offer a vast improvement on the overall code performance. This was achieved without any code rate loss as the turbo code is punctured to make way for the CRC remainder. The results show a gain of 0.4dB compared to the non-CRC (1014,676) turbo code. Another improvement to the decoding performance was achieved through a combination of MAP decoding and Ordered Reliability decoding. The simulations show a performance of just 0.2dB from the Shannon limit. The same code without ordered reliability decoding has a performance curve which is 0.6dB from the Shannon limit. In situations where the MAP decoder fails to converge ordered reliability decoding succeeds in producing a codeword much closer to the received vector, often the correct codeword. The ordered reliability decoding adds to the computational complexity but lends itself to FPGA implementation.Engineering and Physical Sciences Research Council (EPSRC

Spatially Coupled Codes and Optical Fiber Communications: An Ideal Match?

In this paper, we highlight the class of spatially coupled codes and discuss their applicability to long-haul and submarine optical communication systems. We first demonstrate how to optimize irregular spatially coupled LDPC codes for their use in optical communications with limited decoding hardware complexity and then present simulation results with an FPGA-based decoder where we show that very low error rates can be achieved and that conventional block-based LDPC codes can be outperformed. In the second part of the paper, we focus on the combination of spatially coupled LDPC codes with different demodulators and detectors, important for future systems with adaptive modulation and for varying channel characteristics. We demonstrate that SC codes can be employed as universal, channel-agnostic coding schemes.Comment: Invited paper to be presented in the special session on "Signal Processing, Coding, and Information Theory for Optical Communications" at IEEE SPAWC 201