RECONFIGURABLE POWER AMPLIFIER WITH TUNABLE INTERSTAGE MATCHING NETWORK USING GaAs MMIC AND SURFACE-MOUNT TECHNOLOGY

As the demand of reconfigurable devices increases, the possibility of exploiting the interstage matching network in a two-stage amplifier to provide center frequency tuning capability is explored. While placement of tuning elements at the input and/or output matching network has some disadvantages, placement of tuning elements in the interstage absorbs the lossy components characteristics into useful attributes. The circuit design methodology includes graphical method to determine the bandpass topology that achieves high Q-contour on the Smith chart thus result in narrow bandwidth. T-section and π-section topologies are used to match reactive terminations provided by the first and second amplifier stages. The design methodology also includes utilization of interstage mismatch loss that decreases as increasing frequency to compensate for amplifier gain roll-off and equalize the gain at different tuning states. In prototype realization, three design configurations are discussed in this thesis: 1) a discrete design for operation between 0.1 – 0.9 GHz with the total layout area of 7.5 mm x 12.5 mm, 2) a partial monolithic design (Quasi-MMIC) for operation between 0.9 – 2.4 GHz that is 25 times smaller layout area compared to the discrete design, and 3) a conceptual design of integrated monolithic reconfigurable PA for operation between 0.9 – 2.4 GHz that is 130 times smaller layout area compared to the discrete design. One variant of the fabricated reconfigurable PA offers advantage of 4-states center frequency tuning from 1.37 GHz to 1.95 GHz with gain of 21.5 dB (+ 0.7 dB). The feasibility of interstage matching network as tuning elements in reconfigurable power amplifier has been explored. The input and output matching networks are fixed while the interstage impedances are varied using electronic switching (discrete SP4T and GaAs FET switches). The discrete design is suited for the operation at low frequency (fo < 1GHz), while monolithic implementation of the tunable interstage matching network is required for higher frequency operation due to size limitation and parasitic effects. The reconfigurable PA using MMIC tuner was designed at higher frequency to possibly cover GSM, CDMA, Bluetooth, and WiMAX frequency (0.9 – 2.4 GHz)

Tunable Filter Design for the RF Section of a Smartphone

Skyworks Inc. has sponsored a WPI Major Qualifying Project involving the design of a tunable filter for the radio-frequency (RF) section of a smartphone. Our project involves designing and analyzing a single bandpass filter that can be tuned to various center frequencies. The band of frequencies that will be considered include frequencies in cellular band 25 (1850 MHz – 1955 MHz). The design realized in this project uses lumped element components configured in a capacitive coupled chebychev filter topology

Reconfigurable and multi-functional antennas

This thesis describes a research into multi-frequency and filtering antennas. Several novel antennas are presented, each of which addresses a specific issue for future communication systems, in terms of multi-frequency operation, and filtering capability. These antennas seem to be good candidates for implementation in future multiband radios, cognitive radio (CR), and software defined radio (SDR). The filtering antenna provides an additional filtering action which greatly improves the noise performance and reduces the need for filtering circuitry in the RF front end. Two types of frequency reconfigurable antennas are presented. One is tunable left-handed loop over ground plane and the second is slot-fed reconfigurable patch. The operating frequency of the left handed loop is reconfigured by loading varactor diodes whilst the frequency agility in the patch is achieved by inserting switches in the coupling slot. The length of the slot is altered by activating the switches. Compact microstrip antennas with filtering capabilities are presented in this thesis. Two filtering antennas are presented. Whilst the first one consists of three edge-coupled patches, the second filtering antenna consists of rectangular patch coupled to two hairpin resonators. The proposed antennas combine radiating and filtering functions by providing good out of band gain suppression

Power-efficient current-mode analog circuits for highly integrated ultra low power wireless transceivers

In this thesis, current-mode low-voltage and low-power techniques have been applied to implement novel analog circuits for zero-IF receiver backend design, focusing on amplification, filtering and detection stages. The structure of the thesis follows a bottom-up scheme: basic techniques at device level for low voltage low power operation are proposed in the first place, followed by novel circuit topologies at cell level, and finally the achievement of new designs at system level. At device level the main contribution of this work is the employment of Floating-Gate (FG) and Quasi-Floating-Gate (QFG) transistors in order to reduce the power consumption. New current-mode basic topologies are proposed at cell level: current mirrors and current conveyors. Different topologies for low-power or high performance operation are shown, being these circuits the base for the system level designs. At system level, novel current-mode amplification, filtering and detection stages using the former mentioned basic cells are proposed. The presented current-mode filter makes use of companding techniques to achieve high dynamic range and very low power consumption with for a very wide tuning range. The amplification stage avoids gain bandwidth product achieving a constant bandwidth for different gain configurations using a non-linear active feedback network, which also makes possible to tune the bandwidth. Finally, the proposed current zero-crossing detector represents a very power efficient mixed signal detector for phase modulations. All these designs contribute to the design of very low power compact Zero-IF wireless receivers. The proposed circuits have been fabricated using a 0.5μm double-poly n-well CMOS technology, and the corresponding measurement results are provided and analyzed to validate their operation. On top of that, theoretical analysis has been done to fully explore the potential of the resulting circuits and systems in the scenario of low-power low-voltage applications.Programa Oficial de Doctorado en Tecnologías de las Comunicaciones (RD 1393/2007)Komunikazioen Teknologietako Doktoretza Programa Ofiziala (ED 1393/2007

Synthesis, design, and fabrication techniques for reconfigurable microwave and millimeter-wave filters

As wireless communication becomes increasingly ubiquitous, the need for radio receivers which can dynamically adjust to their operating environment grows more urgent. In order to realize reconfigurable receivers, tunable RF front-end components are needed. This dissertation focuses on the theory, design, and implementation of reconfigurable microwave and millimeter-wave filters for use in such receivers. First, a theoretical framework is developed for absorptive bandstop filters, a new class of bandstop filters which overcomes some of the limitations of traditional tunable bandstop filters caused by the use of lossy tunable resonators. This theory is used in conjunction with silicon-micromachining fabrication technology to realize the first ever tunable bandstop filter at W-Band frequencies, as well as a state-of-the-art Ka-band tunable bandstop filter. The problem of bandwidth variation in tunable filters is then addressed. Widely-tunable filters often suffer from variations in bandwidth, excluding them from many applications which require constant bandwidth. A new method for reducing the bandwidth variation of filters using low-loss evanescent-mode cavity resonators is presented, and this technique is used to realize up to 90% reduction of bandwidth variation in octave-tunable bandstop filters. Lastly, a new differential coupling structure for evanescent-mode cavity resonators is developed, enabling the design of fully-balanced and balanced-to-unbalanced (balun) filters. An octave-tunable 3-pole bandpass balun filter using this coupling structure is presented. The balun filter has excellent amplitude and phase balance, resulting in common-mode rejection of greater than 40 dB across its octave tuning range

Investigation of wavelength tunable laser modules for use in future optically switched dense wavelength division multiplexed networks

This thesis investigates the use of fast wavelength tunable laser modules in future optically switched dense wavelength division multiplexed networks (DWDM). The worldwide demand for increasingly greater broadband access has thus far been satisfied by the use of DWDM networks, enabled by the development of the erbium doped amplifier. However as this demand continues to grow electronic switching at network nodes will become a limiting factor, creating a potential bandwidth mismatch between the fibre capacities and switching capacity. Optical switching has been proposed to overcome this electronic bottleneck and fully utilize the enormous bandwidth offered by fibre. Fast tunable lasers (TLs) are a key technology in this area, enabling fast wavelength switching. Experimental work involving the fast wavelength switching of sampled grating distributed Bragg reflector TL modules is presented. Spurious mode generation during wavelength tuning is shown to cause severe cross-channel interference on other data channels in a DWDM test bed. Bit error rate (BER) results demonstrate that a integrated semiconductor optical amplifier can greatly reduce system degradation caused by asynchronous switching of multiple TLs. This is achieved by optically blanking the laser output during channel transition for a period of 60 ns. Immediately after the blanking period a wavelength drift due to the TL module wavelength locking is found to cause cross channel interference and introduce an error floor >1 e-4 on the BER performance characteristic of an adjacent channel in a 12.5 GHz spaced DWDM network. This drift is characterised, using a selfheterodyne and a filter based approach – Error free performance is subsequently demonstrated by using an extended blanking period of 260 ns or by using subcarrier multiplexing transmission and phase selective demodulation before detection. A DWDM optical label switching system, utilizing 40 Gbit/s payload data with low data rate labels placed on a 40 GHz sub-carrier and using TL transmitters is presented. Channel performance is monitored on a static channel as a second data channel is tuned into an adjacent channel on a 100 GHz spaced grid. Error free performance is demonstrated only for the channel payload – Time resolved BER results in agreement with the TL wavelength drift are measured and demonstrate a detrimental influence of the drift on the sub-carrier label performance