128 research outputs found
Millimetre-Resolution Photonics-Assisted Radar
Radar is essential in applications such as anti-collision systems for driving, airport security screening,
and contactless vital sign detection. The demand for high-resolution and real-time recognition in
radar applications is growing, driving the development of electronic radars with increased bandwidth,
higher frequency, and improved reconfigurability. However, conventional electronic approaches are
challenging due to limitations in synthesising radar signals, limiting performance.
In contrast, microwave photonics-enabled radars have gained interest because they offer numerous
benefits compared to traditional electronic methods. Photonics-assisted techniques provide a broad
fractional bandwidth at the optical carrier frequency and enable spectrum manipulation, producing
wideband and high-resolution radar signals in various formats. However, photonic-based methods
face limitations like low time-frequency linearity due to the inherent nonlinearity of lasers, restricted RF bandwidth, limited stability of the photonic frequency multipliers, and difficulties in achieving
extended sensing with dispersion-based techniques.
In response to these challenges, this thesis presents approaches for generating broadband radar
signals with high time-frequency linearity using recirculated unidirectional optical frequency-shifted
modulation. The photonics-assisted system allows flexible bandwidth tuning from sub-GHz to over 30
GHz and requires only MHz-level electronics. Such a system offers millimetre-level range resolution
and a high imaging refresh rate, detecting fast-moving objects using the ISAR technique. With
millimetre-level resolution and micrometre accuracy, this system supports contactless vital sign
detection, capturing precise respiratory patterns from simulators and a living body using a cane toad.
In the end, we highlight the promise of merging radar and LiDAR, foreshadowing future
advancements in sensor fusion for enhanced sensing performance and resilience
UWB FastlyTunable 0.550 GHz RF Transmitter based on Integrated Photonics
Currently, due to the 6G revolution, applications ranging from communication to sensing are experiencing an increasing and urgent need of software-defined ultra-wideband (UWB) and tunable radio frequency (RF) apparatuses with low size, weight, and power consumption (SWaP). Unfortunately, the coexistence of ultra-wideband and software-defined operation, tunability and low SWaP represents a big issue in the current RF technologies. Recently, photonic techniques have been demonstrated to support achieving the desired features when applied in RF UWB transmitters, introducing extremely wide operation and instantaneous bandwidth, tunable filtering, tunable photonics-based microwave mixing with very high port-to-port isolation, and intrinsic immunity to electromagnetic interferences. Moreover, the recent advances in photonics integration also allow to obtain very compact devices. In this article, to the best of our knowledge, the first example of a complete tunable software-defined RF transmitter with low footprint (i.e. on photonic chip) is presented exceeding the state-of-the-art for the extremely large tunability range of 0.5-50 GHz without any parallelization of narrower-band components and with fast tuning (< 200 s). This first implementation represents a breakthrough in microwave photonics
LASER Tech Briefs, Spring 1994
Topics in this Laser Tech Brief include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Mechanics, Fabrication Technology, and books and reports
Ultrafast pulse dynamics in low noise Tm/Ho doped mode-locked fiber lasers
Mode-locked fiber lasers have attracted significant scientific and commercial interest since they offer a compact and highly stable platform with straightforward operation for exploiting ultrafast and nonlinear phenomena. They have enabled a vast range of applications that span from distinct disciplines such as medical diagnostics, molecular spectroscopy, and high-power precise mechanical cutting, to optical metrology. Various gain media have been utilized to achieve laser emission at different wavelengths. We have developed unique thulium/holmium (Tm/Ho) doped mode-locked fiber laser systems to address the needs of low-noise ultrafast optical sources in the wavelength vicinity of 2 μm at higher repetition rates. Since the 2 μm wavelength regime has recently attracted more attention with the emergence of thulium gain fibers, the rich underlying cavity dynamics, novel pulse operation regimes and nonlinear phenomena in compact fiber configurations have not been fully explored yet. In this thesis, research is conducted on novel Tm fiber laser cavity configurations and on the formation of unique, polarization-based pulsing regimes. Particularly, this research is focused on the exploration of novel ultrafast and nonlinear phenomena, and the development of optical sources emitting unprecedented ultrafast pulse trains beyond conventional equal-intensity distribution using Tm/Ho doped gain media.
The research presented features four main results: 1) development of a high repetition rate and low-noise Tm/Ho doped mode-locked fiber laser platform as an attractive optical source for a wide variety of applications 2) investigation of a novel mode-locked state in which the ultrafast pulse train is composed of co-generated, consecutive, equal intensity and orthogonally polarized pulses in order to achieve dual RF comb generation for dual-comb spectroscopy applications, 3) exploration of controllable ultrafast waveform generation utilizing vector soliton and harmonic mode-locking mechanisms for optical telecommunication applications, and 4) demonstration of unique transitional mode-locked states showing exceptional features such as powerful irregular bursts of ultrafast pulses and rogue wave behavior without damaging the laser elements.
The aim of these projects has been to explore the novel optical properties of Tm/Ho co-doped fiber lasers in order to achieve advanced functionalities in commonly practiced applications such as telecommunication, metrology and spectroscopic applications.2019-10-22T00:00:00
Recommended from our members
CMOS Signal Synthesizers for Emerging RF-to-Optical Applications
The need for clean and powerful signal generation is ubiquitous, with applications spanning the spectrum from RF to mm-Wave, to into and beyond the terahertz-gap. RF applications including mobile telephony and microprocessors have effectively harnessed mixed-signal integration in CMOS to realize robust on-chip signal sources calibrated against adverse ambient conditions. Combined with low cost and high yield, the CMOS component of hand-held devices costs a few cents per part per million parts. This low cost, and integrated digital processing, make CMOS an attractive option for applications like high-resolution imaging and ranging, and the emerging 5-G communication space. RADAR techniques when expanded to optical frequencies can enable micrometers of resolution for 3D imaging. These applications, however, impose upto 100x more exacting specifications on power and spectral purity at much higher frequencies than conventional RF synthesizers.
This generation of applications will present unconventional challenges for transistor technologies - whether it is to squeeze performance in the conventionally used spectrum, already wrung dry, or signal generation and system design in the relatively emptier mm-Wave to sub-mmWave spectrum, much of the latter falling in the ``Terahertz Gap". Indeed, transistor scaling and innovative device physics leading to new transistor topologies have yielded higher cut-off frequencies in CMOS, though still lagging well behind SiGe and III-V semiconductors. To avoid multimodule solutions with functionality partitioned across different technologies, CMOS must be pushed out of its comfort zone, and technology scaling has to have accompanying breakthroughs in design approaches not only at the system but also at the block level. In this thesis, while not targeting a specific application, we seek to formulate the obstacles in synthesizing high frequency, high power and low noise signals in CMOS and construct a coherent design methodology to address them. Based on this, three novel prototypes to overcome the limiting factors in each case are presented.
The first half of this thesis deals with high frequency signal synthesis and power generation in CMOS. Outside the range of frequencies where the transistor has gain, frequency generation necessitates harmonic extraction either as harmonic oscillators or as frequency multipliers. We augment the traditional maximum oscillation frequency metric (fmax), which only accounts for transistor losses, with passive component loss to derive an effective fmax metric. We then present a methodology for building oscillators at this fmax, the Maximum Gain Ring Oscillator. Next, we explore generating large signals beyond fmax through harmonic extraction in multipliers. Applying concepts of waveform shaping, we demonstrate a Power Mixer that engineers transistor nonlinearity by manipulating the amplitudes and relative phase shifts of different device nodes to maximize performance at a specific harmonic beyond device cut-off.
The second half proposes a new architecture for an ultra-low noise phase-locked loop (PLL), the Reference-Sampling PLL. In conventional PLLs, a noisy buffer converts the slow, low-noise sine-wave reference signal to a jittery square-wave clock against which the phase of a noisy voltage-controlled oscillator (VCO) is corrected. We eliminate this reference buffer, and measure phase error by sampling the reference sine-wave with the 50x faster VCO waveform already available on chip, and selecting the relevant sample with voltage proportional to phase error. By avoiding the N-squared multiplication of the high-power reference buffer noise, and directly using voltage-mode phase error to control the VCO, we eliminate several noisy components in the controlling loop for ultra-low integrated jitter for a given power consumption. Further, isolation of the VCO tank from any varying load, unlike other contemporary divider-less PLL architectures, results in an architecture with record performance in the low-noise and low-spur space.
We conclude with work that brings together concepts developed for clean, high-power signal generation towards a hybrid CMOS-Optical approach to Frequency-Modulated Continuous-Wave (FMCW) Light-Detection-And-Ranging (LIDAR). Cost-effective tunable lasers are temperature-sensitive and have nonlinear tuning profiles, rendering precise frequency modulations or 'chirps' untenable. Locking them to an electronic reference through an electro-optic PLL, and electronically calibrating the control signal for nonlinearity and ambient sensitivity, can make such chirps possible. Approaches that build on the body of advances in electrical PLLs to control the performance, and ease the specification on the design of optical systems are proposed. Eventually, we seek to leverage the twin advantages of silicon-intensive integration and low-cost high-yield towards developing a single-chip solution that uses on-chip signal processing and phased arrays to generate precise and robust chirps for an electronically-steerable fine LIDAR beam
Photonic Technologies for Radar and Telecomunications Systems
The growing interest in flexible architectures radio and the recent progress in the high speed digital signal processor make a software defined radio system an enabling technology for several digital signals processing architecture and for the flexible signal generation. In this direction wireless radar\telecommunications receiver with digital backend as close as possible to the antenna, as well as the software defined signal generation, reaches several benefits in term of reconfigurabilty, reliability and cost with respect to the analogical front-ends. Unfortunately the present scenario ensures direct sampling and digital downconversion only at the intermediate frequency. Therefore these kinds of systems are quite vulnerable to mismatches and hardware non-idealities in particular due to the mixers stages and filtering process. Furthermore, since the limited input bandwidth, speed and precision of the analog to digital converters represent the main digital system‘s bottleneck, today‘s direct radio frequency sampling is only possible at low frequency. On the other hand software defined signals can be generated exploiting direct digital synthesizers followed by an up-conversion to the desired carrier frequency. State-of-the-art synthesizers (limited to few GHz) introduce quantization errors due to digital-to-analog conversion, and phase errors depending on the phase stability of their internal clock. In addition the high phase stability required in modern wireless systems (such as radar systems) is becoming challenging for the electronic RF signal generation, since at high carrier frequency the frequency multiplication processes that are usually exploited reduce the phase stability of the original RF oscillators. Over the past 30 years microwave photonics (MWP) has been defined as the field that study the interactions between microwave and optical waves and their applications in radar and communications system as well as in hybrid sensor‘s instrumentation. As said before software defined radio applications drive the technological development trough high speed\bandwidth and high dynamic range systems operating directly in the radio frequency domain. Nowadays, while digital electronics represent a limit on system performances, photonic technologies perfectly engages the today‘s system needs and offers promising solution thanks to its inherent high frequency and ultrawide bandwidth. Moreover photonic components with very high phase coherence guarantees highly stable microwave carriers; while strong immunity to the electromagnetic interference, low loss and high tunability make a MWP system robust, flexible and reliable. Historical research and development of MWP finds space in a wide range of applications including the generation, distribution and processing of radio frequency signals such as, for example, analog microwave photonic link, antenna remoting, high frequency and low noise photonic microwave signal generation, photonic microwave signal processing (true time delay for phased array systems, tunable high Q microwave photonic filter and high speed analog to digital converters) and broadband wireless access networks. Performances improvement of photonic and hybrid devices represents a key factor to improve the development of microwave photonic systems in many other applications such as Terahertz generation, optical packet switching and so on. Furthermore, advanced in silicon photonics and integration, makes the low cost complete microwave photonic system on chip just around the corner. In the last years the use of photonics has been suggested as an effective way for generating low phase-noise radio frequency carriers even at high frequency. However while a lot of efforts have been spent in the photonic generation of RF carriers, only few works have been presented on reconfigurable phase coding in the photonics-based signal generators. In this direction two innovative schemes for optically generate multifrequency direct RF phase modulated signals have been presented. Then we propose a wideband ADC with high precision and a photonic wireless receiver for sparse sensing. This dissertation focuses on microwave photonics for radar and telecommunications systems. In particular applications in the field of photonic RF signal generation, photonic analog to digital converters and photonic ultrawideband radio will be presented with the main objective to overcome the limitations of pure electrical systems. Schemes and results will be further detailed and discussed. The dissertation is organized as follows. In the first chapter an overview of the MWP technologies is presented, focusing the attention of the limits overcame by using hybrid optoelectronic systems in particular field of applications. Then optoelectronic devices are introduced in the second chapter to better understand their role in a MWP system. Chapters 3,4, and 5 present results on photonic microwave signal generation, photonic wideband analog to digital converters and photonic ultrawideband up\down converter for both radar and telecommunications applications. Finally in the chapter 6 an overview of the photonic radar prototype is given
Digital Signal Processing for Optical Communications and Coherent LiDAR
Internet data traffic within data centre, access and metro networks is experiencing
unprecedented growth driven by many data-intensive applications. Significant
efforts have been devoted to the design and implementation of low-complexity
digital signal processing (DSP) algorithms that are suitable for these short-reach
optical links. In this thesis, a novel low-complexity frequency-domain (FD)
multiple-input multiple-output (MIMO) equaliser with momentum-based gradient
descent algorithm is proposed, capable of mitigating both static and dynamic
impairments arising from the optical fibre. The proposed frequency-domain
equaliser (FDE) also improves the robustness of the adaptive equaliser against
feedback latencies which is the main disadvantage of FD adaptive equalisers under
rapid channel variations.
The development and maturity of optical fibre communication techniques over
the past few decades have also been beneficial to many other fields, especially
coherent light detection and ranging (LiDAR) techniques. Many applications
of coherent LiDAR are also cost-sensitive, e.g., autonomous vehicles (AVs).
Therefore, in this thesis, a low-cost and low-complexity single-photodiode-based
coherent LiDAR system is investigated. The receiver sensitivity performance of this
receiver architecture is assessed through both simulations and experiments, using
two ranging waveforms known as double-sideband (DSB) amplitude-modulated
chirp signal and single-sideband (SSB) frequency-modulated continuous-wave
(FMCW) signals. Besides, the impact of laser phase noise on the ranging precision
when operating within and beyond the laser coherence length is studied. Achievable
ranging precision beyond the laser coherence length is quantified
NASA SBIR abstracts of 1991 phase 1 projects
The objectives of 301 projects placed under contract by the Small Business Innovation Research (SBIR) program of the National Aeronautics and Space Administration (NASA) are described. These projects were selected competitively from among proposals submitted to NASA in response to the 1991 SBIR Program Solicitation. The basic document consists of edited, non-proprietary abstracts of the winning proposals submitted by small businesses. The abstracts are presented under the 15 technical topics within which Phase 1 proposals were solicited. Each project was assigned a sequential identifying number from 001 to 301, in order of its appearance in the body of the report. Appendixes to provide additional information about the SBIR program and permit cross-reference of the 1991 Phase 1 projects by company name, location by state, principal investigator, NASA Field Center responsible for management of each project, and NASA contract number are included
Quantum Communication, Sensing and Measurement in Space
The main theme of the conclusions drawn for classical communication systems
operating at optical or higher frequencies is that there is a well‐understood
performance gain in photon efficiency (bits/photon) and spectral efficiency
(bits/s/Hz) by pursuing coherent‐state transmitters (classical ideal laser light)
coupled with novel quantum receiver systems operating near the Holevo limit (e.g.,
joint detection receivers). However, recent research indicates that these receivers
will require nonlinear and nonclassical optical processes and components at the
receiver. Consequently, the implementation complexity of Holevo‐capacityapproaching
receivers is not yet fully ascertained. Nonetheless, because the
potential gain is significant (e.g., the projected photon efficiency and data rate of
MIT Lincoln Laboratory's Lunar Lasercom Demonstration (LLCD) could be achieved
with a factor‐of‐20 reduction in the modulation bandwidth requirement), focused
research activities on ground‐receiver architectures that approach the Holevo limit
in space‐communication links would be beneficial.
The potential gains resulting from quantum‐enhanced sensing systems in space
applications have not been laid out as concretely as some of the other areas
addressed in our study. In particular, while the study period has produced several
interesting high‐risk and high‐payoff avenues of research, more detailed seedlinglevel
investigations are required to fully delineate the potential return relative to
the state‐of‐the‐art. Two prominent examples are (1) improvements to pointing,
acquisition and tracking systems (e.g., for optical communication systems) by way
of quantum measurements, and (2) possible weak‐valued measurement techniques
to attain high‐accuracy sensing systems for in situ or remote‐sensing instruments.
While these concepts are technically sound and have very promising bench‐top
demonstrations in a lab environment, they are not mature enough to realistically
evaluate their performance in a space‐based application. Therefore, it is
recommended that future work follow small focused efforts towards incorporating
practical constraints imposed by a space environment.
The space platform has been well recognized as a nearly ideal environment for some
of the most precise tests of fundamental physics, and the ensuing potential of
scientific advances enabled by quantum technologies is evident in our report. For
example, an exciting concept that has emerged for gravity‐wave detection is that the
intermediate frequency band spanning 0.01 to 10 Hz—which is inaccessible from
the ground—could be accessed at unprecedented sensitivity with a space‐based
interferometer that uses shorter arms relative to state‐of‐the‐art to keep the
diffraction losses low, and employs frequency‐dependent squeezed light to surpass
the standard quantum limit sensitivity. This offers the potential to open up a new
window into the universe, revealing the behavior of compact astrophysical objects
and pulsars. As another set of examples, research accomplishments in the atomic
and optics fields in recent years have ushered in a number of novel clocks and
sensors that can achieve unprecedented measurement precisions. These emerging
technologies promise new possibilities in fundamental physics, examples of which
are tests of relativistic gravity theory, universality of free fall, frame‐dragging
precession, the gravitational inverse‐square law at micron scale, and new ways of gravitational wave detection with atomic inertial sensors. While the relevant
technologies and their discovery potentials have been well demonstrated on the
ground, there exists a large gap to space‐based systems. To bridge this gap and to
advance fundamental‐physics exploration in space, focused investments that further
mature promising technologies, such as space‐based atomic clocks and quantum
sensors based on atom‐wave interferometers, are recommended.
Bringing a group of experts from diverse technical backgrounds together in a
productive interactive environment spurred some unanticipated innovative
concepts. One promising concept is the possibility of utilizing a space‐based
interferometer as a frequency reference for terrestrial precision measurements.
Space‐based gravitational wave detectors depend on extraordinarily low noise in
the separation between spacecraft, resulting in an ultra‐stable frequency reference
that is several orders of magnitude better than the state of the art of frequency
references using terrestrial technology. The next steps in developing this promising
new concept are simulations and measurement of atmospheric effects that may limit
performance due to non‐reciprocal phase fluctuations.
In summary, this report covers a broad spectrum of possible new opportunities in
space science, as well as enhancements in the performance of communication and
sensing technologies, based on observing, manipulating and exploiting the
quantum‐mechanical nature of our universe. In our study we identified a range of
exciting new opportunities to capture the revolutionary capabilities resulting from
quantum enhancements. We believe that pursuing these opportunities has the
potential to positively impact the NASA mission in both the near term and in the
long term. In this report we lay out the research and development paths that we
believe are necessary to realize these opportunities and capitalize on the gains
quantum technologies can offer
Continuous Wave and Pulsed Erbium-Doped Fiber Lasers for Microwave Photonics Applications
El objetivo de esta tesis es el diseño, fabricación y caracterización de láseres de fibra como fuentes ópticas compactas con aplicaciones de fotónica de microondas, como son la generación de ondas en la banda de microondas-milimétricas y la conversión analógico-digital asistida ópitcamente. Las prestaciones de la tecnología electrónica en estas aplicaciones están limitadas para frecuencias de trabajo de decenas de GHZ. En este contexto, la tecnología óptica ha encontrado aplicaciones potenciales con el fin de extender las especificaciones de sistemas de microondas tradicionales. En particular, los láseres de de fibra se presentan como fuentes ópticas fiables de coste reducido las cuales están ganando interés como soluciones compactas en comparación con láseres de estado sólido.
Esta tesis presenta el desarrrollo de un láser de fibra de realimentación distribuida capaz de emitir en dos longitudes de onda en régimen continuo para la generación de señales de microondas por fotomezclado. La cavidad óptica está constituida por una red de difracción de Bragg grabada en una fibra dopada con erbio, en la que se aplican dos desfases puntuales. La sintonización dinámica de la diferencia de frecuencia de los dos modos emitidos se lleva a cabo mediante el empleo de dos actuadores piezoeléctricos controlados por una fuente de tensión continua. Tras la fotodetección de la salida del láser se obtiene una señal de microondas con un rango de sintonización continuo de 0.12-7 GHz. La máxima frecuencia de sintonización viene limitada por el ancho de banda espectral de la red de difracción. Por ello, se ha estudiado una segunda configuración del láser con el fin de incrementar el rango de sintonización. La implementación de dos cavidades de realimentación distribuida con diferentes frecuencias de emisión en la misma fibra dopada permite un control más versátil de las frecuencias de emisión de ambos modos ópticos. Esta fuente altamente compacta y sencilla es capaz de proporcionar unVillanueva Ibáñez, GE. (2012). Continuous Wave and Pulsed Erbium-Doped Fiber Lasers for Microwave Photonics Applications [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/17801Palanci
- …