Analog Reconfigurable Circuits

The aim of this paper is to present an overview of a new branch of analog electronics represented by analog reconfigurable circuits. The reconfiguration of analog circuits has been known and used since the beginnings of electronics, but the universal reconfigurable circuits called Field Programmable Analog Arrays (FPAA) have been developed over the last two decades. This paper presents the classification of analog circuit reconfiguration, examples of FPAA solutions obtained as academic projects and commercially available ones, as well as some application examples of the dynamic reconfiguration of FPAA.

Feedback loop design and experimental testing for integrated optics with micro-mechanical tuning

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2005.Page 78 blank. Vita.Includes bibliographical references (p. 69).I designed a capacitive sensor with feedback control for precision tuning of a MEMS controlled wavelength-selective switch. The implementation is based upon a customized feedback loop with a PID controller. The positional stability of the bridge can be controlled to within 0.5 [Angstroms], and the tuner has a time constant of 1 gs for the desired 5V actuation voltages. I created a realistic noise model for the capacitive sensor circuit and its controller, and added this to the noise models already developed for the device. Using these models, the parameters of the system can easily be changed to model device performance under varying conditions and device iterations. I also developed an equipment test set-up for accurately measuring the optical properties, both spectral and temporal, of these devices. The apparatus can be modified slightly to be used in testing of other integrated optoelectronic devices. The procedure for aligning lensed fibers to integrated waveguides and optimizing light throughput is described, and some test device values are presented.by Laura A. Waller.M.Eng

Electronic Photonic Integrated Circuits and Control Systems

Photonic systems can operate at frequencies several orders of magnitude higher than electronics, whereas electronics offers extremely high density and easily built memories. Integrated photonic-electronic systems promise to combine advantage of both, leading to advantages in accuracy, reconfigurability and energy efficiency. This work concerns of hybrid and monolithic electronic-photonic system design. First, a high resolution voltage supply to control the thermooptic photonic chip for time-bin entanglement is described, in which the electronics system controller can be scaled with more number of power channels and the ability to daisy-chain the devices. Second, a system identification technique embedded with feedback control for wavelength stabilization and control model in silicon nitride photonic integrated circuits is proposed. Using the system, the wavelength in thermooptic device can be stabilized in dynamic environment. Third, the generation of more deterministic photon sources with temporal multiplexing established using field programmable gate arrays (FPGAs) as controller photonic device is demonstrated for the first time. The result shows an enhancement to the single photon output probability without introducing additional multi-photon noise. Fourth, multiple-input and multiple-output (MIMO) control of a silicon nitride thermooptic photonic circuits incorporating Mach Zehnder interferometers (MZIs) is demonstrated for the first time using a dual proportional integral reference tracking technique. The system exhibits improved performance in term of control accuracy by reducing wavelength peak drift due to internal and external disturbances. Finally, a monolithically integrated complementary metal oxide semiconductor (CMOS) nanophotonic segmented transmitter is characterized. With segmented design, the monolithic Mach Zehnder modulator (MZM) shows a low link sensitivity and low insertion loss with driver flexibility

Optimization of tunable silicon compatible microring filters

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, February 2008.Includes bibliographical references.Microring resonators can be used as pass-band filters for wavelength division demultiplexing in electronic-photonic integrated circuits for applications such as analog-to-digital converters (ADCs). For high quality signal transmission, the resonant frequency of the filter has to be held at certain value to allow minimum timing errors in the sampling of the signal. Thermal tuning is used to compensate for any fabrication errors or environmental temperature fluctuations that might lead to shift in the resonant frequency. With the optimized heater design and the proper closed feedback temperature control circuit, the rings have very efficient on-chip thermal control to maintain the resonant frequency within 280 MHz.by Reja Amatya.S.M

A Bang-Bang All-Digital PLL for Frequency Synthesis

abstract: Phase locked loops are an integral part of any electronic system that requires a clock signal and find use in a broad range of applications such as clock and data recovery circuits for high speed serial I/O and frequency synthesizers for RF transceivers and ADCs. Traditionally, PLLs have been primarily analog in nature and since the development of the charge pump PLL, they have almost exclusively been analog. Recently, however, much research has been focused on ADPLLs because of their scalability, flexibility and higher noise immunity. This research investigates some of the latest all-digital PLL architectures and discusses the qualities and tradeoffs of each. A highly flexible and scalable all-digital PLL based frequency synthesizer is implemented in 180 nm CMOS process. This implementation makes use of a binary phase detector, also commonly called a bang-bang phase detector, which has potential of use in high-speed, sub-micron processes due to the simplicity of the phase detector which can be implemented with a simple D flip flop. Due to the nonlinearity introduced by the phase detector, there are certain performance limitations. This architecture incorporates a separate frequency control loop which can alleviate some of these limitations, such as lock range and acquisition time.Dissertation/ThesisM.S. Electrical Engineering 201

Design, construction and commissioning of the Thermal Screen Control System for the CMS Tracker detector at CERN

The CERN (European Organization for Nuclear Research) laboratory is currently building the Large Hadron Collider (LHC). Four international collaborations have designed (and are now constructing) detectors able to exploit the physics potential of this collider. Among them is the Compact Muon Solenoid (CMS), a general purpose detector optimized for the search of Higgs boson and for physics beyond the Standard Model of fundamental interactions between elementary particles. This thesis presents, in particular, the design, construction, commissioning and test of the control system for a screen that provides a thermal separation between the Tracker and ECAL (Electromagnetic CALorimeter) detector of CMS (Compact Muon Solenoid experiment). Chapter 1 introduces the new challenges posed by these installations and deals, more in detail, with the Tracker detector of CMS. The size of current experiments for high energy physics is comparable to that of a small industrial plant: therefore, the techniques used for controls and regulations, although highly customized, must adopt Commercial Off The Shelf (COTS) hardare and software. The âﾜslow controlâ systems for the experiments at CERN make extensive use of PLCs (Programmable Logic Controllers) and SCADA (Supervisory Control and Data Acquisition) to provide safety levels (namely interlocks), regulations, remote control of high and low voltages distributions, as well as archiving and trending facilities. The system described in this thesis must follow the same philosophy and, at the same time, comply with international engineering standards. While the interlocks applications belong straightforwardly to the category of DES (Discrete Event System), and are therefore treated with a Finite State Machine approach, other controls are more strictly related to the regulation problem. Chapter 2 will focus on various aspects of modern process control and on the tools used to design the control system for the thermal screen: the principles upon which the controller is designed and tuned, and the model validated, including the Multiple Input-Multiple Output (MIMO) problematics are explained. The thermal screen itself, the constraints and the basis of its functioning are described in Chapter 3, where the thermodynamical design is discussed as well. For the LHC experiments, the aim of a control system is also to provide a well defined SIL (Safety Interlock Level) to keep the system in a safe condition; yet, in this case, it is necessary to regulate the temperature of the system within certain values and respect the constraints arising from the specific needs of the above mentioned subsystems. The most natural choice for a PLC-based controller is a PID (Proportional Integral Derivative) controller. This kind of controller is widely used in many industrial process, from batch production in the pharmaceutics or automotive field to chemical plants, distillation columns and, in general, wherever a reliable and robust control is needed. In order to design and tune PID controllers, many techniques are in use; the approach followed in this thesis is that of black-box modeling: the system is modeled in the time domain, a transfer function is inferred and a controller is designed. Then, a system identification procedure allows for a more thorough study and validation of the model, and for the controller tuning. Project of the thermal screen control including system modeling, controller design and MIMO implementation issues are entirely covered in Chapter 4. A systems engineering methodology has been followed all along to adequately manage and document every phase of the project, complying with time and budget constraints. A risk analysis has been performed, using Layer of Protection Analysis (LOPA) and Hazard and Operability Studies (HAZOP), to understand the level of protection assured by the thermal screen and its control components. Tests planned and then performed to validate the model and for quality assurance purposes are described in Chapter 5. A climatic chamber has been designed and built at CERN, where the real operating conditions of the thermal screen are simulated. Detailed test procedures have been defined, following IEEE standards, in order to completely check every single thermal screen panel. This installation allows for a comparison of different controller tuning approaches, including IAE minimization, Skogestad tuning rules, Internal Model Control (IMC), and a technique based upon the MatLab Optimization toolbox. This installation is also used for system identification purposes and for the acceptance tests of every thermal screen panel (allowing for both electrical and hydraulic checks). Also, tests have been performed on the West Hall CERN experimental area , where a full control system has been set up, for interlock high- and low- voltage lines. The interlock system operating procedures and behaviour have been validated during real operating conditions of the detector esposed to a particle beam. The satisfactory results of tests take the project to full completion, allowing the plan to reach the âﾜexitâ stage, when the thermal screen is ready to be installed in the Tracker and ready to be operational

MATLAB

A well-known statement says that the PID controller is the "bread and butter" of the control engineer. This is indeed true, from a scientific standpoint. However, nowadays, in the era of computer science, when the paper and pencil have been replaced by the keyboard and the display of computers, one may equally say that MATLAB is the "bread" in the above statement. MATLAB has became a de facto tool for the modern system engineer. This book is written for both engineering students, as well as for practicing engineers. The wide range of applications in which MATLAB is the working framework, shows that it is a powerful, comprehensive and easy-to-use environment for performing technical computations. The book includes various excellent applications in which MATLAB is employed: from pure algebraic computations to data acquisition in real-life experiments, from control strategies to image processing algorithms, from graphical user interface design for educational purposes to Simulink embedded systems