Mixed signal design flow, a mixed signal PLL case study

Mixed-signal designs are becoming more and more complex every day. In order to adapt to the new market requirements, a formal process for design and verification of mixed signal systems i. e. top-down design and bottom-up verification methodology is required. This methodology has already been established for digital design. The goal of this research is to propose a new design methodology for mixed signal systems. In the first two chapters of this thesis, the need for a mixed signal design flow based on top-down design methodology will be discussed. The proposed design flow is based on behavioral modeling of the mixed signal system using one of the mixed signal behavioral modeling languages. These models can be used for design and verification through different steps of the design from system level modeling to final physical design. The other advantage of the proposed flow is analog and digital co-design. In the remaining chapters of this thesis, the proposed design flow was verified by designing an 800 MHz mixed signal PLL. The PLL uses a charge pump phase frequency detector, a single capacitor loop filter, and a feed forward error correction architecture using an active damping control circuit instead of passive resistor in loop filter. The design was done in 0. 18- µ m CMOS process technology

Circuit designs for the MAP chip

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1997.Includes bibliographical references (p. 116-117).by Andrew R. Chen.M.Eng

Energy-Efficient Neural Network Architectures

Emerging systems for artificial intelligence (AI) are expected to rely on deep neural networks (DNNs) to achieve high accuracy for a broad variety of applications, including computer vision, robotics, and speech recognition. Due to the rapid growth of network size and depth, however, DNNs typically result in high computational costs and introduce considerable power and performance overheads. Dedicated chip architectures that implement DNNs with high energy efficiency are essential for adding intelligence to interactive edge devices, enabling them to complete increasingly sophisticated tasks by extending battery lie. They are also vital for improving performance in cloud servers that support demanding AI computations. This dissertation focuses on architectures and circuit technologies for designing energy-efficient neural network accelerators. First, a deep-learning processor is presented for achieving ultra-low power operation. Using a heterogeneous architecture that includes a low-power always-on front-end and a selectively-enabled high-performance back-end, the processor dynamically adjusts computational resources at runtime to support conditional execution in neural networks and meet performance targets with increased energy efficiency. Featuring a reconfigurable datapath and a memory architecture optimized for energy efficiency, the processor supports multilevel dynamic activation of neural network segments, performing object detection tasks with 5.3x lower energy consumption in comparison with a static execution baseline. Fabricated in 40nm CMOS, the processor test-chip dissipates 0.23mW at 5.3 fps. It demonstrates energy scalability up to 28.6 TOPS/W and can be configured to run a variety of workloads, including severely power-constrained ones such as always-on monitoring in mobile applications. To further improve the energy efficiency of the proposed heterogeneous architecture, a new charge-recovery logic family, called zero-short-circuit current (ZSCC) logic, is proposed to decrease the power consumption of the always-on front-end. By relying on dedicated circuit topologies and a four-phase clocking scheme, ZSCC operates with significantly reduced short-circuit currents, realizing order-of-magnitude power savings at relatively low clock frequencies (in the order of a few MHz). The efficiency and applicability of ZSCC is demonstrated through an ANSI S1.11 1/3 octave filter bank chip for binaural hearing aids with two microphones per ear. Fabricated in a 65nm CMOS process, this charge-recovery chip consumes 13.8µW with a 1.75MHz clock frequency, achieving 9.7x power reduction per input in comparison with a 40nm monophonic single-input chip that represents the published state of the art. The ability of ZSCC to further increase the energy efficiency of the heterogeneous neural network architecture is demonstrated through the design and evaluation of a ZSCC-based front-end. Simulation results show 17x power reduction compared with a conventional static CMOS implementation of the same architecture.PHDElectrical and Computer EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/147614/1/hsiwu_1.pd

The ALICE TPC, a large 3-dimensional tracking device with fast readout for ultra-high multiplicity events

The design, construction, and commissioning of the ALICE Time-Projection Chamber (TPC) is described. It is the main device for pattern recognition, tracking, and identification of charged particles in the ALICE experiment at the CERN LHC. The TPC is cylindrical in shape with a volume close to 90 m^3 and is operated in a 0.5 T solenoidal magnetic field parallel to its axis. In this paper we describe in detail the design considerations for this detector for operation in the extreme multiplicity environment of central Pb--Pb collisions at LHC energy. The implementation of the resulting requirements into hardware (field cage, read-out chambers, electronics), infrastructure (gas and cooling system, laser-calibration system), and software led to many technical innovations which are described along with a presentation of all the major components of the detector, as currently realized. We also report on the performance achieved after completion of the first round of stand-alone calibration runs and demonstrate results close to those specified in the TPC Technical Design Report.Comment: 55 pages, 82 figure

VLSI Implementation of a Spiking Neural Network

Im Rahmen der vorliegenden Arbeit wurden Konzepte und dedizierte Hardware entwickelt, die es erlauben, großskalige pulsgekoppelte neuronale Netze in Hardware zu realisieren. Die Arbeit basiert auf dem analogen VLSI-Modell eines pulsgekoppelten neuronalen Netzes, welches synaptische Plastizität (STPD) in jeder einzelnen Synapse beinhaltet. Das Modell arbeitet analog mit einem Geschwindigkeitszuwachs von bis zu 10^5 im Vergleich zur biologischen Echtzeit. Aktionspotentiale werden als digitale Ereignisse übertragen. Inhalt dieser Arbeit sind vornehmlich die digitale Hardware und die Übertragung dieser Ereignisse. Das analoge VLSI-Modell wurde in Verbindung mit Digitallogik, welche zur Verarbeitung neuronaler Ereignisse und zu Konfigurationszwecken dient, in einen gemischt analog-digitalen ASIC integriert, wobei zu diesem Zweck ein automatisierter Arbeitsablauf entwickelt wurde. Außerdem wurde eine entsprechende Kontrolleinheit in programmierbarer Logik implementiert und eine Hardware-Plattform zum parallelen Betrieb mehrerer neuronaler Netzwerkchips vorgestellt. Um das VLSI-Modell auf mehrere neuronale Netzwerkchips ausdehnen zu können, wurde ein Routing-Algorithmus entwickelt, welcher die Übertragung von Ereignissen zwischen Neuronen und Synapsen auf unterschiedlichen Chips ermöglicht. Die zeitlich korrekte Übertragung der Ereignisse, welche eine zwingende Bedingung für das Funktionieren von Plastizitätsmechanismen ist, wird durch diesen Algorithmus sichergestellt. Die Funktionalität des Algorithmus wird mittels Simulationen verifiziert. Weiterhin wird die korrekte Realisierung des gemischt analog-digitalen ASIC in Verbindung mit dem zugehörigen Hardware-System demonstriert und die Durchführbarkeit biologisch realistischer Experimente gezeigt. Das vorgestellte großskalige physikalische Modell eines neuronalen Netzwerks wird aufgrund seiner schnellen und parallelen Arbeitsweise für Experimentierzwecke in den Neurowissenschaften einsetzbar sein. Als Ergänzung zu numerischen Simulationen bietet es vor allem die Möglichkeit der intuitiven und umfangreichen Suche nach geeigneten Modellparametern

The STiC ASIC High Precision Timing with Silicon Photomultipliers

In recent years, Silicon Photomultipliers are being increasingly used for Time of Flight measurements in particle detectors. To utilize the high intrinsic time resolution of these sensors in detector systems, the development of specialized, highly integrated readout electronics is required. In this thesis, a mixed-signal application specific integrated circuit, named STiC, has been developed, characterized and integrated in a detector system. STiC has been specifically designed for high precision timing measurements with SiPMs, and is in particular dedicated to the EndoTOFPET-US project, which aims to achieve a coincidence time resolution of 200 ps FWHM and an energy resolution of less than 20% in an endoscopic positron emission tomography system. The chip integrates 64 high precision readout channels for SiPMs together with a digital core logic to process, store and transfer the recorded events to a data acquisition system. The performance of the chip has been validated in coincidence measurements using detector modules consisting of 3.1×3.1×15 mm³ LYSO crystals coupled to Silicon Photomultipliers from Hamamatsu. The measurements show an energy resolution of 15% FWHM for the detection of 511keV photons. A coincidence time resolution of 213ps FWHM has been measured, which is among the best resolution values achieved to date with this detector topology. STiC has been integrated in the EndoTOFPET-US detector system and has been chosen as the baseline design for the readout of SiPM sensors in the Mu3e experiment

NONLINEAR OPERATORS FOR IMAGE PROCESSING: DESIGN, IMPLEMENTATION AND MODELING TECHNIQUES FOR POWER ESTIMATION

1998/1999Negli ultimi anni passati le applicazioni multimediali hanno visto uno sviluppo notevole, trovando applicazione in un gran numero di campi. Applicazioni come video conferenze, diagnostica medica, telefonia mobile e applicazioni militari necessitano il trattamento di una gran mole di dati ad alta velocità. Pertanto, l'elaborazione di immagini e di dati vocali è molto importante ed è stata oggetto di numerosi sforzi, nel tentativo di trovare algoritmi sempre più veloci ed efficaci. Tra gli algoritmi proposti, noi crediamo che gli operatori razionali svolgano un ruolo molto importante, grazie alla loro versatilità ed efficacia nell'elaborazione di dati. Negli ultimi anni sono stati proposti diversi algoritmi, dimostrando che questi operatori possono essere molto vantaggiosi in diverse applicazioni, producendo buoni risultati. Lo scopo di questo lavoro è di realizzare alcuni di questi algoritmi e, quindi, dimostrare che i filtri razionali, in particolare, possono essere realizzati senza ricorrere a sistemi di grandi dimensioni e possono raggiungere frequenze operative molto alte. Una volta che il blocco fondamentale di un sistema basato su operatori razionali sia stato realizzato, esso pu6 essere riusato con successo in molte altre applicazioni. Dal punto di vista del progettista, è importante avere uno schema generale di studio, che lo renda capace di studiare le varie configurazioni del sistema da realizzare e di analizzare i compromessi tra le variabili di progetto. In particolare, per soddisfare l'esigenza di metodi versatili per la stima della potenza, abbiamo sviluppato una tecnica di macro modellizazione che permette al progettista di stimare velocemente ed accuratamente la potenza dissipata da un circuito. La tesi è organizzata come segue: Nel Capitolo 1 alcuni sono presentati alcuni algoritmi studiati per la realizzazione. Ne viene data solo una veloce descrizione, lasciando comunque al lettore interessato dei riferimenti bibliografici. Nel Capitolo 2 vengono discusse le architetture fondamentali usate per la realizzazione. Principalmente sono state usate architetture a pipeline, ma viene data anche una descrizione degli approcci oggigiorno disponibili per l'ottimizzazione delle temporizzazioni. Nel Capitolo 3 sono presentate le realizzazioni di due sistemi studiati per questa tesi. Gli approcci seguiti si basano su ASIC e FPGA. Richiedono tecniche e soluzioni diverse per il progetto del sistema, per cui é interessante vedere cosa pu6 essere fatto nei due casi. Infine, nel Capitolo 4, descriviamo la nostra tecnica di macro modellizazione per la stima di potenza, dando una breve visione delle tecniche finora proposte e facendo vedere quali sono i vantaggi che il nostro metodo comporta per il progetto.In the past few years, multimedia application have been growing very fast, being applied to a large variety of fields. Applications like video conference, medical diagnostic, mobile phones, military applications require to handle large amount of data at high rate. Images as well as voice data processing are therefore very important and they have been subjected to a lot of efforts in order to find always faster and effective algorithms. Among image processing algorithms, we believe that rational operators assume an important role, due to their versatility and effectiveness in data processing. In the last years, several algorithms have been proposed, demonstrating that these operators can be very suitable in different applications with very good results. The aim of this work is to implement some of these algorithm and, therefore, demonstrate that rational filters, in particular, can be implemented without requiring large sized systems and they can operate at very high frequencies. Once the basic building block of a rational based system has been implemented, it can be successfully reused in many other applications. From the designer point of view, it is important to have a general framework, which makes it able to study various configurations of the system to be implemented and analyse the trade-off among the design variables. In particular, to meet the need far versatile tools far power estimation, we developed a new macro modelling technique, which allows the designer to estimate the power dissipated by a circuit quickly and accurately. The thesis is organized as follows: In chapter 1 we present some of the algorithms which have been studied for implementation. Only a brief overview is given, leaving to the interested reader some references in literature. In chapter 2 we discuss the basic architectures used for the implementations. Pipelined structures have been mainly used for this thesis, but an overview of the nowaday available approaches for timing optimization is presented. In chapter 3 we present two of the implementation designed for this thesis. The approaches followed are ASIC driven and FPGA drive. They require different techniques and different solution for the design of the system, therefore it is interesting to see what can be done in both the cases. Finally, in chapter 4, we describe our macro modelling techniques for power estimation, giving a brief overview of the up to now proposed techniques and showing the advantages our method brings to the design.XII Ciclo1969Versione digitalizzata della tesi di dottorato cartacea

Topical Workshop on Electronics for Particle Physics

The purpose of the workshop was to present results and original concepts for electronics research and development relevant to particle physics experiments as well as accelerator and beam instrumentation at future facilities; to review the status of electronics for the LHC experiments; to identify and encourage common efforts for the development of electronics; and to promote information exchange and collaboration in the relevant engineering and physics communities

Network-on-Chip

Addresses the Challenges Associated with System-on-Chip Integration Network-on-Chip: The Next Generation of System-on-Chip Integration examines the current issues restricting chip-on-chip communication efficiency, and explores Network-on-chip (NoC), a promising alternative that equips designers with the capability to produce a scalable, reusable, and high-performance communication backbone by allowing for the integration of a large number of cores on a single system-on-chip (SoC). This book provides a basic overview of topics associated with NoC-based design: communication infrastructure design, communication methodology, evaluation framework, and mapping of applications onto NoC. It details the design and evaluation of different proposed NoC structures, low-power techniques, signal integrity and reliability issues, application mapping, testing, and future trends. Utilizing examples of chips that have been implemented in industry and academia, this text presents the full architectural design of components verified through implementation in industrial CAD tools. It describes NoC research and developments, incorporates theoretical proofs strengthening the analysis procedures, and includes algorithms used in NoC design and synthesis. In addition, it considers other upcoming NoC issues, such as low-power NoC design, signal integrity issues, NoC testing, reconfiguration, synthesis, and 3-D NoC design. This text comprises 12 chapters and covers: The evolution of NoC from SoC—its research and developmental challenges NoC protocols, elaborating flow control, available network topologies, routing mechanisms, fault tolerance, quality-of-service support, and the design of network interfaces The router design strategies followed in NoCs The evaluation mechanism of NoC architectures The application mapping strategies followed in NoCs Low-power design techniques specifically followed in NoCs The signal integrity and reliability issues of NoC The details of NoC testing strategies reported so far The problem of synthesizing application-specific NoCs Reconfigurable NoC design issues Direction of future research and development in the field of NoC Network-on-Chip: The Next Generation of System-on-Chip Integration covers the basic topics, technology, and future trends relevant to NoC-based design, and can be used by engineers, students, and researchers and other industry professionals interested in computer architecture, embedded systems, and parallel/distributed systems

A Physical Implementation with Custom Low Power Extensions of a Reconfigurable Hardware Fabric

The primary focus of this thesis is on the physical implementation of the SuperCISC Reconfigurable Hardware Fabric (RHF). The SuperCISC RHF provides a fast time to market solution that approximates the benefits of an ASIC (Application Specific Integrated Circuit) while retaining the design flow of an embedded software system. The fabric which consists of computational ALU stripes and configurable multiplexer based interconnect stripes has been implemented in the IBM 0.13um CMOS process using Cadence SoC Encounter. As the entire hardware fabric utilizes a combinational flow, glitching power consumption is a potential problem inherent to the fabric. A CMOS thyristor based programmable delay element has been designed in the IBM 0.13um CMOS process, to minimize the glitch power consumed in the hardware fabric. The delay element was characterized for use in the IBM standard cell library to synthesize standard cell ASIC designs requiring this capability such as the SuperCISC fabric. The thesis also introduces a power-gated memory solution, which can be used to increase the size of an EEPROM memory for use in SoC style applications. A macromodel of the EEPROM has been used to model the erase, program and read characteristics of the EEPROM. This memory is designed for use in the fabric for storing encryption keys, etc