118 research outputs found
Recommended from our members
Future of asynchronous transfer mode networking
The growth of Asynchronous Transfer Mode (ATM) was considered to be the ideal carrier of the high bandwidth applications like video on demand and multimedia e-learning. ATM emerged commercially in the beginning of the 1990\u27s. It was designed to provide a different quality of service at a speed up 100 Gbps for both real time and non real time application. The turn of the 90\u27s saw a variety of technologies being developed. This project analyzes these technologies, compares them to the Asynchronous Transfer Mode and assesses the future of ATM
Technology Directions for the 21st Century
New technologies will unleash the huge capacity of fiber-optic cable to meet growing demands for bandwidth. Companies will continue to replace private networks with public network bandwidth-on-demand. Although asynchronous transfer mode (ATM) is the transmission technology favored by many, its penetration will be slower than anticipated. Hybrid networks - e.g., a mix of ATM, frame relay, and fast Ethernet - may predominate, both as interim and long-term solutions, based on factors such as availability, interoperability, and cost. Telecommunications equipment and services prices will decrease further due to increased supply and more competition. Explosive Internet growth will continue, requiring additional backbone transmission capacity and enhanced protocols, but it is not clear who will fund the upgrade. Within ten years, space-based constellations of satellites in Low Earth orbit (LEO) will serve mobile users employing small, low-power terminals. 'Little LEO's' will provide packet transmission services and geo-position determination. 'Big LEO's' will function as global cellular telephone networks, with some planning to offer video and interactive multimedia services. Geosynchronous satellites also are proposed for mobile voice grade links and high-bandwidth services. NASA may benefit from resulting cost reductions in components, space hardware, launch services, and telecommunications services
Topology overlays for dedicated protection Ethernet LAN services in advanced SONET/SDH networks
The explosion of information technology (IT) services coupled with much-increased personal and scientific computing capabilities has resulted in great demand for more scalable and reliable networking services. Along these lines, carriers have spent large sums to transition their legacy\u27 SONET/SDH voice-based networking infrastructures to better support client-side Ethernet data interfaces, i.e., next-generation SONET/SDH (NGS). In particular, a key addition here has been the new virtual concatenation (VCAT) feature which supports inverse multiplexing to \u27split\u27 larger connection requests in to a series of independently-routed \u27sub-connections\u27. As these improved infrastructures have been deployed, the design of new Ethernet over SONET/SDH (EoS) services has become a key focus area for carriers, i.e., including point-to-point and multi-point services. In light of the above, this thesis focuses on the study of improved multi-point EoS schemes in NGS networks, i.e., to provision robust \u27virtual LAN\u27 capabilities over metro and wide-area domains. Indeed, as services demands grow, survivability considerations are becoming a key concern. Along these lines, the proposed solution develops novel multi-tiered (partial) protection strategies. Specifically, graph-theoretic algorithms are first proposed to interconnect multi-point node groups using bus and minimum spanning tree (MST) overlays. Next, advanced multi-path routing schemes are used to provision and protect these individual overlay connections using the inverse-multiplexing capabilities of NGS. Finally, post-fault restoration features are also added to handle expanded failure conditions, e.g., multiple failures. The performances of the proposed multi-point EoS algorithms developed in this research are gauged using advanced software-based simulation in the OPNET ModelerTM environment. The findings indicate that both the bus and MST overlays give very good performance in terms of request blocking and carried load. However, the MST-based overlays slightly outperform the bus-based overlays as they allow more efficient topology designs. In addition, the incorporation of dynamic load state information in the selection of bus and/or MST overlays is also very beneficial as opposed to just using static hop count state. Furthermore, inverse-multiplexing is highly-effective, yielding notably higher carried loads when coupled with load-balancing sub-connection routing. Finally, results also show that post-fault restoration is also a very effective means of boosting EoS LAN throughputs for partially-protected demands, consistently matching the reliability of full-protection setups.\u2
Design of switch architecture for the geographical cell transport protocol
The Internet is divided into multiple layers to reduce and manage complexity. The International Organization for Standardization (ISO) developed a 7 layer network model and had been revised to a 5 layer TCP/IP based Internet Model. The layers of the Internet can also be divided into top layer TCP/IP protocol suite layers and the underlying transport network layers. SONET/SDH, a dominant transport network, was designed initially for circuit based telephony services. Advancement in the internet world with voice and video services had pushed SONET/SDH to operate with reduced efficiencies and increased costs. Hence, redesign and redeployment of the transport network has been and continues to be a subject of research and development. Several projects are underway to explore new transport network ideas such as G.709 and GMPLS.
This dissertation presents the Geographical Cell Transport (GCT) protocol as a candidate for a next generation transport network. The GCT transport protocol and its cell format are described. The benefits provided by the proposed GCT transport protocol as compared to the existing transport networks are investigated. Existing switch architectures are explored and a best architecture to be implemented in VLSI for the proposed transport network input queued virtual output queuing is obtained. The objectives of this switch are high performance, guaranteed fairness among all inputs and outputs, robust behavior under different traffic patterns, and support for Quality of Service (QoS) provisioning. An implementation of this switch architecture is carried out using HDL.
A novel pseudo random number generation unit is designed to nullify the bias present in an arbitration unit. The validity of the designed is checked by developing a traffic load model. The speedup factor required in the switch to maintain desired throughput is explored and is presented in detail. Various simulation results are shown to study the behavior of the designed switch under uniform and hotspot traffic. The simulation results show that QoS behavior and the crossing traffic through the switch has not been affected by hotspots
Recommended from our members
Traffic and performance evaluation for optical networks. An Investigation into Modelling and Characterisation of Traffic Flows and Performance Analysis and Engineering for Optical Network Architectures.
The convergence of multiservice heterogeneous networks and ever increasing Internet applications, like peer to peer networking and the increased number of users and services, demand a more efficient bandwidth allocation in optical networks. In this context, new architectures and protocols are needed in conjuction with cost effective quantitative methodologies in order to provide an insight into the performance aspects of the next and future generation Internets.
This thesis reports an investigation, based on efficient simulation methodologies, in order to assess existing high performance algorithms and to propose new ones. The analysis of the traffic characteristics of an OC-192 link (9953.28 Mbps) is initially conducted, a requirement due to the discovery of self-similar long-range dependent properties in network traffic, and the suitability of the GE distribution for modelling interarrival times of bursty traffic in short time scales is presented. Consequently, using a heuristic approach, the self-similar properties of the GE/G/¿ are being presented, providing a method to generate self-similar traffic that takes into consideration burstiness in small time scales. A description of the state of the art in optical networking providing a deeper insight into the current technologies, protocols and architectures in the field, which creates the motivation for more research into the promising switching technique of ¿Optical Burst Switching¿ (OBS). An investigation into the performance impact of various burst assembly strategies on an OBS edge node¿s mean buffer length is conducted. Realistic traffic characteristics are considered based on the analysis of the OC-192 backbone traffic traces. In addition the effect of burstiness in the small time scales on mean assembly time and burst size distribution is investigated. A new Dynamic OBS Offset Allocation Protocol is devised and favourable comparisons are carried out between the proposed OBS protocol and the Just Enough Time (JET) protocol, in terms of mean queue length, blocking and throughput. Finally the research focuses on simulation methodologies employed throughout the thesis using the Graphics Processing Unit (GPU) on a commercial NVidia GeForce 8800 GTX, which was initially designed for gaming computers. Parallel generators of Optical Bursts are implemented and simulated in ¿Compute Unified Device Architecture¿ (CUDA) and compared with simulations run on general-purpose CPU proving the GPU to be a cost-effective platform which can significantly speed-up calculations in order to make simulations of more complex and demanding networks easier to develop
Feasibility of wireless mesh for LTE-Advanced small cell access backhaul
Mobiilidatan määrä on muutaman viime vuoden aikana kasvanut voimakkaasti ja nykyiset ennustukset arvioivat eksponentiaalista kasvukäyrää tulevien vuosien aikana. Matkapuhelinjärjestelmät ovat kehittyneet nopeasti tämän trendin ohjaamana. Neljännen sukupolven matkapuhelinverkkostandardien myötä, uudet innovaatiot kuten heterogeeniset verkkoratkaisut tarjoavat ratkaisun nykyisiin skaalautuvuus- ja kapasiteettiongelmiin. Joitain ilmeisiä ongelmakohtiakin kuitenkin esiintyy kuten heterogeenisten verkkojen runkokytkennän toteuttaminen.
Yksi lupaavimmista tavoista toteuttaa heterogeenisten verkkojen runkokytkentä on langaton ja itseorganisoituva mesh-verkko. Tämän opinnäytetyön tavoitteena on varmistaa ja testata Nokia Siemens Networksin kehittämän mesh-runkokytkentäverkkokonseptin toteutettavuutta ja toiminnallisuutta soveltuvan validointijärjestelmän avulla.
Kaiken kaikkiaan validointijärjestelmä ja sen päälle toteutettu mesh-protokolla toimivat moitteettomasti koko kehitys- ja testausprosessin ajan. Konseptin eri ominaisuudet ja mekanismit todistettiin täysin toteutettaviksi ja toimiviksi. Muutamalla lisäominaisuudella ja konseptiparannuksella mesh-konsepti tarjoaa houkuttelevan ja innovatiivisen ratkaisun heterogeenisten verkkojen runkokytkentään tulevaisuudessa.Mobile traffic demands and volumes are increasing and will dramatically keep increasing in the future. Along with this, mobile networks have evolved to better match this growth. Fourth generation cellular network standard introduced a set of new innovations for mobile communications, including support for heterogeneous network deployments. Heterogeneous networking is the likely answer for future mobile data capacity shortage but also poses some challenges, the most evident being how to implement the backhauling.
One of the most promising heterogeneous network backhaul solutions is a meshed radio system with self-organizing features. The main scope of this master's thesis is the verification of functionality and feasibility of a wireless mesh backhaul concept developed by Nokia Siemens Networks through a proof-of-concept system.
All in all, the wireless mesh proof-of-concept system performed strongly throughout the development and testing process. The different functionalities were proven to work successfully together. With further development and enhancement, the system concept displays extreme potential for a state-of-the-art heterogeneous network backhaul technology
Overview of UMTS network evolution through radio and transmission feature validation
This project is based on several UMTS network feature validation with the aim to provide an end-to-end in-depth knowledge overview gained in parallel in the areas of radio network mobility processes (cell camping and inter-system handover), Quality of Service improvement for HSPA data users and transport network evolution towards the All-IP era.Hardware and software validation is a key step in the relationship between the mobile network operator and the vendor. Through this verification process, while executing that functionality or testing a specific hardware, the difference between the actual result and expected result can be better understood and, in turn, this in-depth knowledge acquisition is translated into a tailored usage of the product in the operator’s live network. As a result, validation helps in building a better product as per the customer’s requirement and helps satisfying their needs, which positively impacts in the future evolution of the vendor product roadmap implementation process for a specific customer. This project is based on several Universal Mobile Telecommunication Services (UMTS) network feature validation with the aim to provide an end-to-end in-depth knowledge overview gained in parallel in the areas of radio network mobility processes (cell camping and inter-system handover), Quality of Service improvement for High Speed Downlink Packet Access (HSPA) data users and transport network evolution towards the All-IP era.Las campañas de validación hardware y software son un paso clave en las relaciones comerciales establecidas entre un operador de telecomunicaciones y su proveedor de equipos de red. Durante los procesos de certificación, mientras se ejecuta una funcionalidad software o se valida un determinado hardware, se obtiene un conocimiento profundo de la diferencia entre el resultado obtenido y el esperado, repercutiendo directamente en un uso a medida de dicha funcionalidad o hardware en la propia red del cliente. Como consecuencia de lo anterior, podemos aseverar que los procesos de validación permiten en gran medida al proveedor adaptarse mejor a los requerimientos del cliente, ayudando a satisfacer realmente sus necesidades. Esto implica directamente un impacto positivo en la futura evolución del portfolio que el fabricante ofrece a un determinado cliente. Este proyecto está basado en la validación de diferentes funcionalidades de red UMTS, cuyo objetivo es proporcionar un conocimiento global de distintos aspectos que conforman el funcionamiento de una red de telecomunicaciones 3G, como son los procesos de movilidad de acceso radio (acampado de red y handover inter-sistema), las mejoras en la calidad de servicio para usuarios de datos HSPA y la convergencia de la red de transporte hacia la era IP.Els processos de validació hardware i software són un punt clau en les relacions comercials establertes entre un operador de telecomunicaciones i el proveïdor d'equipament de la xarxa. En el transcurs dels processos de certificació, a la mateixa vegada que s'executa una funcionalitat software o es valida un determinat hardware, s'obtenen grans coneixements respecte la diferència entre el resultat obtingut i l'esperat, que són d'aplicació directa a l'hora d'establir un ús adpatat a la xarxa del client. En conseqüència, podem asseverar que les campanyes de validació permeten en gran mesura al proveïdor adaptar-se millor als requeriments del client, ajudant a satisfer realment les seves necessitats. Això implica directament un impacte positiu en la futura evol.lució del portfoli que el fabricant ofereix a un determinat client. Aquest projecte es basa en la presentació d'un procès de validació de diferents funcionalitats relacionades amb la xarxa UMTS, amb l'objectiu de proporcionar un coneixement global de la varietat d'aspectes que conformen el funcionament d'una xarxa de telecomunicacions 3G, com són els processos de mobilitat en accès radio (acampat de l'usuari i handover inter-sistema), millores en la qualitat de servei per a usuaris de dades HSPA i la convergència de la xarxa de transport cap a l'era IP
Wavelength assignment in all-optical networks for mesh topologies
All-Optical Networks employing Dense Wavelength Division Multiplexing (DWDM) are believed to be the next generation networks that can meet the ever-increasing demand for bandwidth of the end users. This thesis presents some new heuristics for wavelength assignment and converter placement in mesh topologies. Our heuristics try to assign the wavelengths in an efficient manner that results in very low blocking probability. We propose novel static and dynamic assignment schemes that outperform the assignments reported in the literature even when converters are used. The proposed on-line scheme called Round-Robin assignment outperforms previously proposed strategies such as first-fit and random assignment schemes. The performance improvement obtained with the proposed static assignments is very significant when compared with the dynamic schemes. We designed and developed a simulator in the C language that supports the 2D mesh topology with DWDM. We ran extensive simulations and compared our heuristics with those reported in the literature. We have examined converter placement in mesh topologies and proposed that placing converters at the center yields better results than uniform placement when dimension order routing is employed. We introduced a new concept called wavelength assignment with second trial that results in extremely low blocking probabilities when compared to schemes based on a single trial. Our proposed schemes are simple to implement and do not add to the cost. Thus we conclude that wavelength assignment plays more significant role in affecting the blocking probability than wavelength converters. We further conclude that static schemes without converters could easily outperform dynamic schemes thus resulting in great savings
- …