497 research outputs found
Exploiting Known Interference as Green Signal Power for Downlink Beamforming Optimization
We propose a data-aided transmit beamforming scheme for the multi-user multiple-input-single-output (MISO) downlink channel. While conventional beamforming schemes aim at the minimization of the transmit power subject to suppressing interference to guarantee quality of service (QoS) constraints, here we use the knowledge of both data and channel state information (CSI) at the transmitter to exploit, rather than suppress, constructive interference. More specifically, we design a new precoding scheme for the MISO downlink that minimizes the transmit power for generic phase shift keying (PSK) modulated signals. The proposed precoder reduces the transmit power compared to conventional schemes, by adapting the QoS constraints to accommodate constructive interference as a source of useful signal power. By exploiting the power of constructively interfering symbols, the proposed scheme achieves the required QoS at lower transmit power. We extend this concept to the signal to interference plus noise ratio (SINR) balancing problem, where higher SINR values compared to the conventional SINR balancing optimization are achieved for given transmit power budgets. In addition, we derive equivalent virtual multicast formulations for both optimizations, both of which provide insights of the optimal solution and facilitate the design of a more efficient solver. Finally, we propose a robust beamforming technique to deal with imperfect CSI, that also reduces the transmit power over conventional techniques, while guaranteeing the required QoS. Our simulation and analysis show significant power savings for small scale MISO downlink channels with the proposed data-aided optimization compared to conventional beamforming optimization
Constructive Multiuser Interference in Symbol Level Precoding for the MISO Downlink Channel
This paper investigates the problem of interference among the simultaneous
multiuser transmissions in the downlink of multiple antennas systems. Using
symbol level precoding, a new approach towards the multiuser interference is
discussed along this paper. The concept of exploiting the interference between
the spatial multiuser transmissions by jointly utilizing the data information
(DI) and channel state information (CSI), in order to design symbol-level
precoders, is proposed. In this direction, the interference among the data
streams is transformed under certain conditions to useful signal that can
improve the signal to interference noise ratio (SINR) of the downlink
transmissions. We propose a maximum ratio transmission (MRT) based algorithm
that jointly exploits DI and CSI to glean the benefits from constructive
multiuser interference. Subsequently, a relation between the constructive
interference downlink transmission and physical layer multicasting is
established. In this context, novel constructive interference precoding
techniques that tackle the transmit power minimization (min power) with
individual SINR constraints at each user's receivers is proposed. Furthermore,
fairness through maximizing the weighted minimum SINR (max min SINR) of the
users is addressed by finding the link between the min power and max min SINR
problems. Moreover, heuristic precoding techniques are proposed to tackle the
weighted sum rate problem. Finally, extensive numerical results show that the
proposed schemes outperform other state of the art techniques.Comment: Submitted to IEEE Transactions on Signal Processin
Energy-Efficient Symbol-Level Precoding in Multiuser MISO Based on Relaxed Detection Region
This paper addresses the problem of exploiting interference among
simultaneous multiuser transmissions in the downlink of multiple-antenna
systems. Using symbol-level precoding, a new approach towards addressing the
multiuser interference is discussed through jointly utilizing the channel state
information (CSI) and data information (DI). The interference among the data
streams is transformed under certain conditions to a useful signal that can
improve the signal-to-interference noise ratio (SINR) of the downlink
transmissions and as a result the system's energy efficiency. In this context,
new constructive interference precoding techniques that tackle the transmit
power minimization (min power) with individual SINR constraints at each user's
receiver have been proposed. In this paper, we generalize the CI precoding
design under the assumption that the received MPSK symbol can reside in a
relaxed region in order to be correctly detected. Moreover, a weighted
maximization of the minimum SNR among all users is studied taking into account
the relaxed detection region. Symbol error rate analysis (SER) for the proposed
precoding is discussed to characterize the tradeoff between transmit power
reduction and SER increase due to the relaxation. Based on this tradeoff, the
energy efficiency performance of the proposed technique is analyzed. Finally,
extensive numerical results show that the proposed schemes outperform other
state-of-the-art techniques.Comment: Submitted to IEEE transactions on Wireless Communications. arXiv
admin note: substantial text overlap with arXiv:1408.470
Symbol Based Precoding in The Downlink of Cognitive MISO Channels
This paper proposes symbol level precoding in the downlink of a MISO
cognitive system. The new scheme tries to jointly utilize the data and channel
information to design a precoding that minimizes the transmit power at a
cognitive base station (CBS); without violating the interference temperature
constraint imposed by the primary system. In this framework, the data
information is handled at symbol level which enables the characterization the
intra-user interference among the cognitive users as an additional source of
useful energy that should be exploited. A relation between the constructive
multiuser transmissions and physical-layer multicast system is established.
Extensive simulations are performed to validate the proposed technique and
compare it with conventional techniques.Comment: CROWNCOM 201
Energy-Efficient Coordinated Multi-Cell Multigroup Multicast Beamforming with Antenna Selection
This paper studies energy-efficient coordinated beamforming in multi-cell
multi-user multigroup multicast multiple-input single-output systems. We aim at
maximizing the network energy efficiency by taking into account the fact that
some of the radio frequency chains can be switched off in order to save power.
We consider the antenna specific maximum power constraints to avoid non-linear
distortion in power amplifiers and user-specific quality of service (QoS)
constraints to guarantee a certain QoS levels. We first introduce binary
antenna selection variables and use the perspective formulation to model the
relation between them and the beamformers. Subsequently, we propose a new
formulation which reduces the feasible set of the continuous relaxation,
resulting in better performance compared to the original perspective
formulation based problem. However, the resulting optimization problem is a
mixed-Boolean non-convex fractional program, which is difficult to solve. We
follow the standard continuous relaxation of the binary antenna selection
variables, and then reformulate the problem such that it is amendable to
successive convex approximation. Thereby, solving the continuous relaxation
mostly results in near-binary solution. To recover the binary variables from
the continuous relaxation, we switch off all the antennas for which the
continuous values are smaller than a small threshold. Numerical results
illustrate the superior convergence result and significant achievable gains in
terms of energy efficiency with the proposed algorithm.Comment: 6 pages, 5 figures, accepted to IEEE ICC 2017 - International
Workshop on 5G RAN Desig
- …