Estimation of the EMR shielding effectiveness of knit structures

This paper describes the creation of and tests petformed on knit structures of three types (left-right stitch (I), double-layer (II), and double-layer with additional fillings (III)), which contain ferromagnetic materials and electroconductive materials and are designed for individual protection against occupational hazard. The ferromagnetic material is composed of two bunches of twisted filaments of ferromagnetic stainless steel made by Bekaert, Belgium, and the electroconductive material is a thread made of cotton and copper wire covered by silver made by Swiss Shield (R) yarns, Switzerland. Both the ferromagnetic and electroconductive materials form a hybrid yarn. Shielding effectiveness (SE) tests on knit structures were performed by the Central Institute for Labour Protection - National Research Institute, Poland and by the Institute of Architecture of Textiles, Poland. Analysis of the structures indicates a SE from both the electrical field and magnetical field in some narrow ranges

Hybridní tkané struktury

Tato disertační práce poskytuje podrobnější informace o vlastnostech čedičových vláken vedle běžně používaných vláken, a to pro návrh a vývoj hybridních tkaných textilií určených pro výrobu kompozitních materiálů, zejména betonu vyztuženého textilií (TRC). Zkoumány jsou různé kombinace čedičové hybridní tkaniny s ohledem na mechanické, tepelné, akustické, elektrické a jiné vlastnosti, přičemž vliv hybridizace a struktury tkaných textilií je studován detailněji. Mechanické vlastnosti jsou predikovány s použitím a strukturální modely korelovány s výsledky získanými z provedených experimentů. Čedičová vlákna jsou velmi perspektivním materiálem díky jejich ohnivzdornosti spojené s lávovým původem, vynikajícím mechanickým vlastnostem a relativně nízké ceně. Na druhou stranu, tato vlákna doposud nebyla podrobena rozsáhlejšímu průzkumu, protože je možno je považovat za relativně nový typ vlákna. V technických článcích je možno nalézt jen omezené množství údajů o jejich chování po zpracování, jež je spojeno se stárnutím materiálu. Disertační práce prozkoumává možnosti využití čedičových vláken v kombinaci s jinými typy přízí a následně také vliv hybridní tkané struktury na nosnost kompozitu a dobu jeho životnosti. V této studii je vyšetřeno nosné chování TRC kompozitu (kompozitní systém tvořený jemnozrnnou betonovou matricí a výztuží složenou z vysoce funkčních vláken zpracovaných do plošné textilie) při jednoosém namáhání tahem. Průzkum je zaměřen na výztužnou schopnost hybridní tkané struktury. Při začleňování textilní struktury do betonu je zřejmé, že veškeré příze nejsou impregnovány cementovou matricí kompletně, což vede k heterogenitě systému beton - příze přispívajícímu ke komplexní nosnosti a defektnímu chování TRC kompozitu. Hlavním cílem této práce je tedy průzkum hybridizačních efektů na nosné chování TRC kompozitu.This thesis conveys a better insight into characteristics of Basalt fibers specifically, alongside commonly used fibers to design and develop hybrid woven fabrics for TRC composite materials. Various combinations of basalt hybrid fabrics are investigated with respect to mechanical, thermal, acoustic, electrical and other functional properties. The influence of hybridization and structure of woven fabric is studied in detail. The tensile properties are predicted by using structural model and correlated to the results obtained through experiments. Basalt fibers are very promising materials due to their fire resistance related to magmatic origin, superior mechanical properties and relatively low cost. On the other hand, being a relatively new kind of fiber, they are still not studied extensively. There are very few indications in technical papers about their behavior after aging treatments. The current study investigates the possibility of using basalt with other types of yarns and consequently the effect of hybrid woven structure on load bearing capacity and durability. In the present work, the load-bearing behavior of Textile Reinforced Concrete (TRC), which is a composite of a fine-grained concrete matrix and a reinforcement of high-performance fibers processed to textiles, when exposed to uniaxial tensile loading was investigated. The investigations are focused on reinforcement of hybrid woven fabrics. When textile yarns are embedded in concrete, they are not entirely impregnated with cementitious matrix, which leads to associated heterogeneity of the concrete and the yarns to a complex load-bearing and failure behavior of the composite system. The main objective of the work is the investigation of hybridization effects in the load-bearing behavior of TRC

Integration of conductive materials with textile structures : an overview

In the last three decades, the development of new kinds of textiles, so-called smart and interactive textiles, has continued unabated. Smart textile materials and their applications are set to drastically boom as the demand for these textiles has been increasing by the emergence of new fibers, new fabrics, and innovative processing technologies. Moreover, people are eagerly demanding washable, flexible, lightweight, and robust e-textiles. These features depend on the properties of the starting material, the post-treatment, and the integration techniques. In this work, a comprehensive review has been conducted on the integration techniques of conductive materials in and onto a textile structure. The review showed that an e-textile can be developed by applying a conductive component on the surface of a textile substrate via plating, printing, coating, and other surface techniques, or by producing a textile substrate from metals and inherently conductive polymers via the creation of fibers and construction of yarns and fabrics with these. In addition, conductive filament fibers or yarns can be also integrated into conventional textile substrates during the fabrication like braiding, weaving, and knitting or as a post-fabrication of the textile fabric via embroidering. Additionally, layer-by-layer 3D printing of the entire smart textile components is possible, and the concept of 4D could play a significant role in advancing the status of smart textiles to a new level

Cheese tart press machine

Tart is a type of baked open-pastry which consists of a shortcrust pastry and a filling over it (Figure 9.1). Shortcrust pastry often used as the base for the tart. The filling may be usually something sweet and savory poured onto the crust, though modern tarts are usually fruit-based, sometimes with custard. In the production of tart, its crust is the main part. In the process of making tart crust, the dough must first be pressed to get the desired shape and size