A Survey of Techniques For Improving Energy Efficiency in Embedded Computing Systems

Recent technological advances have greatly improved the performance and features of embedded systems. With the number of just mobile devices now reaching nearly equal to the population of earth, embedded systems have truly become ubiquitous. These trends, however, have also made the task of managing their power consumption extremely challenging. In recent years, several techniques have been proposed to address this issue. In this paper, we survey the techniques for managing power consumption of embedded systems. We discuss the need of power management and provide a classification of the techniques on several important parameters to highlight their similarities and differences. This paper is intended to help the researchers and application-developers in gaining insights into the working of power management techniques and designing even more efficient high-performance embedded systems of tomorrow

Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

Dynamic Voltage Scaling With Reduced Frequency Switching And Preemptions

Dynamic Voltage Scaling is an innovative technique for reducing the power consumption of a processor by utilizing its hardware functionality. Dynamic Voltage Scaling processors are mainly focusing on power management. Such processors can be switch between discrete frequency and voltage levels. The main challenges of Dynamic Voltage Scaling are increased number of preemptions and frequency switching. A part of dynamic energy as well as CPU time is lost due to these processes. To limit such processes, an algorithm is proposed which reduces both unwanted frequency switching and preemptions

Optimal Two-Level Speed Assignment for Real-Time Systems

Reducing energy consumption is one of the main concerns in the design and implementation of embedded real-time systems. For this reason, the current generation of processors allows to vary voltage and operating frequency to balance computational speed and energy consumption. This technique is called dynamic voltage scaling (DVS). When applying DVS tohard real-time systems, it is important to provide the worst-case computational requirement; otherwise the timing constraints may be violated. However, the probability of a task executing for its worst-case execution time is very low. In this paper,we show how to exploit probabilistic information about the execution time of a task in order to reduce the energy consumed by the processor. Optimal speed assignments and transition points are found using a very general model for the processor. The model accounts for the processor idle power and time/energy overheads due to frequency transitions. We also show how these results apply to some significant cases

Energy-efficient thermal-aware multiprocessor scheduling for real-time tasks using TCPNs

We present an energy-effcient thermal-aware real-time global scheduler for a set of hard real-time (HRT) tasks running on a multiprocessor system. This global scheduler fulfills the thermal and temporal constraints by handling two independent variables, the task allocation time and the selection of clock frequency. To achieve its goal, the proposed scheduler is split into two stages. An off-line stage, based on a deadline partitioning scheme, computes the cycles that the HRT tasks must run per deadline interval at the minimum clock frequency to save energy while honoring the temporal and thermal constraints, and computes the maximum frequency at which the system can run below the maximum temperature. Then, an on-line, event-driven stage performs global task allocation applying a Fixed-Priority Zero-Laxity policy, reducing the overhead of quantum-based or interval-based global schedulers. The on-line stage embodies an adaptive scheduler that accepts or rejects soft RT aperiodic tasks throttling CPU frequency to the upper lowest available one to minimize power consumption while meeting time and thermal constraints. This approach leverages the best of two worlds: the off-line stage computes an ideal discrete HRT multiprocessor schedule, while the on-line stage manage soft real-time aperiodic tasks with minimum power consumption and maximum CPU utilization

Application analyses of ultra-low-energy processor

Abstract. Low energy consumption has become a critical design feature in modern systems. Internet of Things, wearables and other portable devices create increasing demand for low power design where device size is dictated by battery and low energy means longer battery life and smaller physical size. These are crucial features for wearables and especially implantable medical devices. There are several low power and energy efficient techniques which are applied at different abstraction levels of the system design. A technique usually utilizing software control and hardware features is DVFS (dynamic voltage and frequency scaling), a dynamic power management technique which decreases processor clock frequency and supply voltage. Reduction in energy consumption is achieved with the cost of reduced performance. One of the questions with DVFS is how the execution frequencies are defined. This thesis presents a method for frequency optimization for applications executed on a single core processor. Execution trace data is used to profile the application. FreeRTOS operating system is used although tracing can be implemented with any real-time operating system executing tasks as separate threads. Based on profiling and user-defined data, task execution frequencies are defined assuming that execution time scales linearly with the frequency. A near-threshold ARM Cortex M3 with integrated power management and phase-locked loop is used for measurements. The measurements show that energy savings can be achieved without affecting correct application execution. However, the reduction in energy consumption depends highly on the system used and the application execution profile. Iterative testing and frequency optimization are required to ensure adequate performance. For energy efficiency optimization, energy consumption needs to be considered in every phase of the design.Matalan energiankulutuksen prosessorin sovellusanalyysi. Tiivistelmä. Matala energiankulutus on keskeinen ominaisuus nykyisten järjestelmien suunnittelussa. Esineiden Internet ja puettava tietotekniikka luovat tarpeen yhä pienemmälle energiankulutukselle. Laitteen koko määräytyy akun koon mukana. Matala tehonkulutus tarkoittaa pidempää akunkestoa ja pienempää fyysista kokoa. Nämä ovat ratkaisevia ominaisuuksia, erityisesti implantoitaville lääkinnällisille laitteille. Energiatehokkuuteen ja matalaan energiankulutukseen tähtääviä menetelmiä voidaan soveltaa eri abstraktiotasoilla järjestelmän suunnittelussa. Dynaaminen jännitteen ja taajuuden skaalaus on menetelmä, millä pyritään alentamaan dynaamista tehonkulutusta säätelemällä käyttöjännitettä ja kellotaajuutta. Suorituskyvyn kustannuksella on mahdollista saavuttaa matalampi energiankulutus. Keskeinen kysymys on, miten käytettävät kellotaajuudet tulee määritellä. Tässä diplomityössä kehitetään menetelmä, jota voidaan käyttää optimaalisten kellotaajuuksien määrittämiseen. Suorituksen aikana kerättävää dataa käytetään ohjelman profilointiin ja optimointimallin luomiseen. Suoritusdatan kerääminen on kehitetty FreeRTOS-käyttöjärjestelmälle, mutta periaate on sovellettavissa käyttöjärjestelmille, joissa tehtävät suoritetaan erillisissä prosesseissa. Profilointidata hyödynnetään yhdessä käyttäjän syöttämän data kanssa kellotaajuuksien määrittämiseen olettaen, että suoritusaika skaalautuu lineaarisesti kellotaajuden kanssa. Suositustaajuudet määritetään jokaiselle prosessille erikseen. Mittauksissa käytettiin ARM Cortex M3 prosessoria integroidulla tehonhallinnalla ja vaihelukolla. Mittaustulokset osoittavat, että energiankulutusta voidaan pienentää vaikuttamatta sovelluksen virheettömään suoritukseen. Saavutettava hyöty tehonkulutuksessa on riippuvainen käytettävästä järjestelmästä ja sovelluksen suoritusprofiilista. Riittävä suorituskyky täytyy varmistaa iteratiivisella testaamisella ja kellotaajuuksien optimoinnilla. Tehonkulutus ja energiatehokkuus täytyy huomioida suunnitteluprosessin jokaisella osa-alueella, jotta parhaat tulokset saavutetaan

Low-energy standby-sparing for hard real-time systems

Time-redundancy techniques are commonly used in real-time systems to achieve fault tolerance without incurring high energy overhead. However, reliability requirements of hard real-time systems that are used in safety-critical applications are so stringent that time-redundancy techniques are sometimes unable to achieve them. Standby sparing as a hardwareredundancy technique can be used to meet high reliability requirements of safety-critical applications. However, conventional standby-sparing techniques are not suitable for lowenergy hard real-time systems as they either impose considerable energy overheads or are not proper for hard timing constraints. In this paper we provide a technique to use standby sparing for hard real-time systems with limited energy budgets. The principal contribution of this work is an online energymanagement technique which is specifically developed for standby-sparing systems that are used in hard real-time applications. This technique operates at runtime and exploits dynamic slacks to reduce the energy consumption while guaranteeing hard deadlines. We compared the low-energy standby-sparing (LESS) system with a low-energy timeredundancy system (from a previous work). The results show that for relaxed time constraints, the LESS system is more reliable and provides about 26% energy saving as compared to the time-redundancy system. For tight deadlines when the timeredundancy system is not sufficiently reliable (for safety-critical application), the LESS system preserves its reliability but with about 49% more energy consumptio

DYNAMIC VOLTAGE SCALING FOR PRIORITY-DRIVEN SCHEDULED DISTRIBUTED REAL-TIME SYSTEMS

Energy consumption is increasingly affecting battery life and cooling for real- time systems. Dynamic Voltage and frequency Scaling (DVS) has been shown to substantially reduce the energy consumption of uniprocessor real-time systems. It is worthwhile to extend the efficient DVS scheduling algorithms to distributed system with dependent tasks. The dissertation describes how to extend several effective uniprocessor DVS schedul- ing algorithms to distributed system with dependent task set. Task assignment and deadline assignment heuristics are proposed and compared with existing heuristics concerning energy-conserving performance. An admission test and a deadline com- putation algorithm are presented in the dissertation for dynamic task set to accept the arriving task in a DVS scheduled real-time system. Simulations show that an effective distributed DVS scheduling is capable of saving as much as 89% of energy that would be consumed without using DVS scheduling. It is also shown that task assignment and deadline assignment affect the energy- conserving performance of DVS scheduling algorithms. For some aggressive DVS scheduling algorithms, however, the effect of task assignment is negligible. The ad- mission test accept over 80% of tasks that can be accepted by a non-DVS scheduler to a DVS scheduled real-time system