Common-mode voltage cancellation in single- and three-phase transformer-less PV power converters

Electrical Energy generation is an issue that is continuously cause of concern around the world. Many efforts have been done in this sense to cover the requirements of the constantly growing in the electrical energy demand. But not only the electrical energy demand is growing but also clean electrical energy demand. In this sense, many countries are taking advantage from the renewable energy generation systems, considering mainly wind and solar energy. Solar energy systems provide a high percentage of the total energy production, according with the latest report of the International Energy Agency (IEA) regarding Photovoltaic Power System Program (PVPS), the cumulative installed PV power at the end of 2009 it was around 20.3 GW out of which 6.188 GW were installed in 2009. From the total PV power installed in 2009, 6.113 are grid connected systems. The growing of the PV systems is due to the new technologies and developments that have permitted to reduce costs in the total design and installation of a PV source. As the major percentage of the total PV energy installed is from grid connected systems, this thesis work deals with the analysis and proposals in the transformerless grid-connected PV systems which can provide higher efficiencies regarding PV system with transformer. In this sense, when there is not transformer between the electrical grid and the power converter, a problem regarding leakage ground currents appears, this is the main issue in this thesis work. The main research task in this thesis work is to analyze and evaluate the operation of the different transformerless topologies presented in the bibliography and then to provide some solutions to minimize the leakage ground current phenomenon in order to comply with the standard requirements

Power Converters in Power Electronics

In recent years, power converters have played an important role in power electronics technology for different applications, such as renewable energy systems, electric vehicles, pulsed power generation, and biomedical sciences. Power converters, in the realm of power electronics, are becoming essential for generating electrical power energy in various ways. This Special Issue focuses on the development of novel power converter topologies in power electronics. The topics of interest include, but are not limited to: Z-source converters; multilevel power converter topologies; switched-capacitor-based power converters; power converters for battery management systems; power converters in wireless power transfer techniques; the reliability of power conversion systems; and modulation techniques for advanced power converters

Hybrid Smart Transformer for Enhanced Power System Protection Against DC With Advanced Grid Support

The traditional grid is rapidly transforming into smart substations and grid assets incorporating advanced control equipment with enhanced functionalities and rapid self-healing features. The most important and strategic equipment in the substation is the transformer and is expected to perform a variety of functions beyond mere voltage conversion and isolation. While the concept of smart solid-state transformers (SSTs) is being widely recognized, their respective lifetime and reliability raise concerns, thus hampering the complete replacement of traditional transformers with SSTs. Under this scenario, introducing smart features in conventional transformers utilizing simple, cost-effective, and easy to install modules is a highly desired and logical solution. This dissertation is focused on the design and evaluation of a power electronics-based module integrated between the neutral of power transformers and substation ground. The proposed module transforms conventional transformers into hybrid smart transformers (HST). The HST enhances power system protection against DC flow in grid that could result from solar storms, high-elevation nuclear explosions, monopolar or ground return mode (GRM) operation of high-voltage direct current (HVDC) transmission and non-ideal switching in inverter-based resources (IBRs). The module also introduces a variety of advanced grid-support features in conventional transformers. These include voltage regulation, voltage and impedance balancing, harmonics isolation, power flow control and voltage ride through (VRT) capability for distributed energy resources (DERs) or grid connected IBRs. The dissertation also proposes and evaluates a hybrid bypass switch for HST module and associated transformer protection during high-voltage events at the module output, such as, ground faults, inrush currents, lightning and switching transients. The proposed strategy is evaluated on a scaled hardware prototype utilizing controller hardware-in-the-loop (C-HIL) and power hardware-in-the-loop (P-HIL) techniques. The dissertation also provides guidelines for field implementation and deployment of the proposed HST scheme. The device is proposed as an all-inclusive solution to multiple grid problems as it performs a variety of functions that are currently being performed through separate devices increasing efficiency and justifying its installation