377 research outputs found
Sum Throughput Maximization in Multi-Tag Backscattering to Multiantenna Reader
Backscatter communication (BSC) is being realized as the core technology for
pervasive sustainable Internet-of-Things applications. However, owing to the
resource-limitations of passive tags, the efficient usage of multiple antennas
at the reader is essential for both downlink excitation and uplink detection.
This work targets at maximizing the achievable sum-backscattered-throughput by
jointly optimizing the transceiver (TRX) design at the reader and
backscattering coefficients (BC) at the tags. Since, this joint problem is
nonconvex, we first present individually-optimal designs for the TRX and BC. We
show that with precoder and {combiner} designs at the reader respectively
targeting downlink energy beamforming and uplink Wiener filtering operations,
the BC optimization at tags can be reduced to a binary power control problem.
Next, the asymptotically-optimal joint-TRX-BC designs are proposed for both low
and high signal-to-noise-ratio regimes. Based on these developments, an
iterative low-complexity algorithm is proposed to yield an efficient
jointly-suboptimal design. Thereafter, we discuss the practical utility of the
proposed designs to other application settings like wireless powered
communication networks and BSC with imperfect channel state information.
Lastly, selected numerical results, validating the analysis and shedding novel
insights, demonstrate that the proposed designs can yield significant
enhancement in the sum-backscattered throughput over existing benchmarks.Comment: 17 pages, 5 figures, accepted for publication in IEEE Transactions on
Communication
Slocalization: Sub-{\mu}W Ultra Wideband Backscatter Localization
Ultra wideband technology has shown great promise for providing high-quality
location estimation, even in complex indoor multipath environments, but
existing ultra wideband systems require tens to hundreds of milliwatts during
operation. Backscatter communication has demonstrated the viability of
astonishingly low-power tags, but has thus far been restricted to narrowband
systems with low localization resolution. The challenge to combining these
complimentary technologies is that they share a compounding limitation,
constrained transmit power. Regulations limit ultra wideband transmissions to
just -41.3 dBm/MHz, and a backscatter device can only reflect the power it
receives. The solution is long-term integration of this limited power, lifting
the initially imperceptible signal out of the noise. This integration only
works while the target is stationary. However, stationary describes the vast
majority of objects, especially lost ones. With this insight, we design
Slocalization, a sub-microwatt, decimeter-accurate localization system that
opens a new tradeoff space in localization systems and realizes an energy,
size, and cost point that invites the localization of every thing. To evaluate
this concept, we implement an energy-harvesting Slocalization tag and find that
Slocalization can recover ultra wideband backscatter in under fifteen minutes
across thirty meters of space and localize tags with a mean 3D Euclidean error
of only 30 cm.Comment: Published at the 17th ACM/IEEE Conference on Information Processing
in Sensor Networks (IPSN'18
Spatial Identification Methods and Systems for RFID Tags
DisertaÄŤnĂ práce je zaměřena na metody a systĂ©my pro měřenĂ vzdálenosti a lokalizaci RFID tagĹŻ pracujĂcĂch v pásmu UHF. Ăšvod je vÄ›nován popisu souÄŤasnĂ©ho stavu vÄ›deckĂ©ho poznánĂ v oblasti RFID prostorovĂ© identifikace a struÄŤnĂ©mu shrnutĂ problematiky modelovánĂ a návrhu prototypĹŻ tÄ›chto systĂ©mĹŻ. Po specifikaci cĂlĹŻ disertace pokraÄŤuje práce popisem teorie modelovánĂ degenerovanĂ©ho kanálu pro RFID komunikaci. DetailnÄ› jsou rozebrány metody měřenĂ vzdálenosti a odhadu smÄ›ru pĹ™Ăchodu signálu zaloĹľenĂ© na zpracovánĂ fázovĂ© informace. Pro účely lokalizace je navrĹľeno nÄ›kolik scĂ©nářů rozmĂstÄ›nĂ antĂ©n. Modely degenerovanĂ©ho kanálu jsou simulovány v systĂ©mu MATLAB. VĂ˝znamná část tĂ©to práce je vÄ›nována konceptu softwarovÄ› definovanĂ©ho rádia (SDR) a specifikĹŻm jeho adaptace na UHF RFID, která vyuĹľitĂ běžnĂ˝ch SDR systĂ©mĹŻ znaÄŤnÄ› omezujĂ. Diskutována je zejmĂ©na problematika prĹŻniku nosnĂ© vysĂlaÄŤe do pĹ™ijĂmacĂ cesty a poĹľadavky na signál lokálnĂho oscilátoru pouĹľĂvanĂ˝ pro směšovánĂ. Prezentovány jsou tĹ™i vyvinutĂ© prototypy: experimentálnĂ dotazovaÄŤ EXIN-1, měřicĂ systĂ©m zaloĹľenĂ˝ na platformÄ› Ettus USRP a antĂ©nnĂ pĹ™epĂnacĂ matice pro emulaci SIMO systĂ©mu. ZávÄ›reÄŤná část je zaměřena na testovánĂ a zhodnocenĂ popisovanĂ˝ch lokalizaÄŤnĂch technik, zaloĹľenĂ˝ch na měřenĂ komplexnĂ pĹ™enosovĂ© funkce RFID kanálu. Popisuje ĂşzkopásmovĂ©/širokopásmovĂ© měřenĂ vzdálenosti a metody odhadu smÄ›ru signálu. Oba navrĹľenĂ© scĂ©náře rozmĂstÄ›nĂ antĂ©n jsou v závÄ›ru ověřeny lokalizaÄŤnĂm měřenĂm v reálnĂ˝ch podmĂnkách.The doctoral thesis is focused on methods and systems for ranging and localization of RFID tags operating in the UHF band. It begins with a description of the state of the art in the field of RFID positioning with short extension to the area of modeling and prototyping of such systems. After a brief specification of dissertation objectives, the thesis overviews the theory of degenerate channel modeling for RFID communication. Details are given about phase-based ranging and direction of arrival finding methods. Several antenna placement scenarios are proposed for localization purposes. The degenerate channel models are simulated in MATLAB. A significant part of the thesis is devoted to software defined radio (SDR) concept and its adaptation for UHF RFID operation, as it has its specialties which make the usage of standard SDR test equipment very disputable. Transmit carrier leakage into receiver path and requirements on local oscillator signals for mixing are discussed. The development of three experimental prototypes is also presented there: experimental interrogator EXIN-1, measurement system based on Ettus USRP platform, and antenna switching matrix for an emulation of SIMO system. The final part is focused on testing and evaluation of described positioning techniques based on complex backscatter channel transfer function measurement. Both narrowband/wideband ranging and direction of arrival methods are validated. Finally, both proposed antenna placement scenarios are evaluated with real-world measurements.
- …