2,246 research outputs found
Keep Rollin' - Whole-Body Motion Control and Planning for Wheeled Quadrupedal Robots
We show dynamic locomotion strategies for wheeled quadrupedal robots, which
combine the advantages of both walking and driving. The developed optimization
framework tightly integrates the additional degrees of freedom introduced by
the wheels. Our approach relies on a zero-moment point based motion
optimization which continuously updates reference trajectories. The reference
motions are tracked by a hierarchical whole-body controller which computes
optimal generalized accelerations and contact forces by solving a sequence of
prioritized tasks including the nonholonomic rolling constraints. Our approach
has been tested on ANYmal, a quadrupedal robot that is fully torque-controlled
including the non-steerable wheels attached to its legs. We conducted
experiments on flat and inclined terrains as well as over steps, whereby we
show that integrating the wheels into the motion control and planning framework
results in intuitive motion trajectories, which enable more robust and dynamic
locomotion compared to other wheeled-legged robots. Moreover, with a speed of 4
m/s and a reduction of the cost of transport by 83 % we prove the superiority
of wheeled-legged robots compared to their legged counterparts.Comment: IEEE Robotics and Automation Letter
Virtual Structure Based Formation Tracking of Multiple Wheeled Mobile Robots: An Optimization Perspective
Today, with the increasing development of science and technology, many systems need to be optimized to find the optimal solution of the system. this kind of problem is also called optimization problem. Especially in the formation problem of multi-wheeled mobile robots, the optimization algorithm can help us to find the optimal solution of the formation problem. In this paper, the formation problem of multi-wheeled mobile robots is studied from the point of view of optimization. In order to reduce the complexity of the formation problem, we first put the robots with the same requirements into a group. Then, by using the virtual structure method, the formation problem is reduced to a virtual WMR trajectory tracking problem with placeholders, which describes the expected position of each WMR formation. By using placeholders, you can get the desired track for each WMR. In addition, in order to avoid the collision between multiple WMR in the group, we add an attraction to the trajectory tracking method. Because MWMR in the same team have different attractions, collisions can be easily avoided. Through simulation analysis, it is proved that the optimization model is reasonable and correct. In the last part, the limitations of this model and corresponding suggestions are given
Robust and adaptive chatter free formation control of wheeled mobile robots with uncertainties
This paper addresses the robust formation control of non-holonomic mobile robots with homogeneous system architecture and decentralized control structure. Therefore, it was necessary the mathematical modeling of mobile robots, from which, the Separation-Bearing variant of Leader-Following control strategy was implemented. The stability proof were based on the Lyapunov theory. The sliding mode control (SMC) strategy was used in the controller design to make the control robust to the incidence of uncertainties and disturbances. The Fuzzy Adaptive Formation Control is designed to eliminate the previous bounding knowledge of these uncertainties and disturbances. The proposed control effectiveness is demonstrated by results obtained with simulations in Matlab/Simulink. The pure kinematic and kinematic with disturbances is also analyzed. The results shows the controllers effectiveness to formation of multi-robots systems to the eight-shaped trajectory
Research on a semiautonomous mobile robot for loosely structured environments focused on transporting mail trolleys
In this thesis is presented a novel approach to model, control, and planning the motion of
a nonholonomic wheeled mobile robot that applies stable pushes and pulls to a
nonholonomic cart (York mail trolley) in a loosely structured environment. The method is
based on grasping and ungrasping the nonholonomic cart, as a result, the robot changes its
kinematics properties. In consequence, two robot configurations are produced by the task
of grasping and ungrasping the load, they are: the single-robot configuration and the
robot-trolley configuration. Furthermore, in order to comply with the general planar
motion law of rigid bodies and the kinematic constraints imposed by the robot wheels for
each configuration, the robot has been provided with two motorized steerable wheels in
order to have a flexible platform able to adapt to these restrictions. [Continues.
Comprehensive review on controller for leader-follower robotic system
985-1007This paper presents a comprehensive review of the leader-follower robotics system. The aim of this paper is to find and elaborate on the current trends in the swarm robotic system, leader-follower, and multi-agent system. Another part of this review will focus on finding the trend of controller utilized by previous researchers in the leader-follower system. The controller that is commonly applied by the researchers is mostly adaptive and non-linear controllers. The paper also explores the subject of study or system used during the research which normally employs multi-robot, multi-agent, space flying, reconfigurable system, multi-legs system or unmanned system. Another aspect of this paper concentrates on the topology employed by the researchers when they conducted simulation or experimental studies
Simultaneous Obstacle Avoidance and Target Tracking of Multiple Wheeled Mobile Robots With Certified Safety
Collision avoidance plays a major part in the control of the wheeled mobile robot (WMR). Most existing collision-avoidance methods mainly focus on a single WMR and environmental obstacles. There are few products that cast light on the collision-avoidance between multiple WMRs (MWMRs). In this article, the problem of simultaneous collision-avoidance and target tracking is investigated for MWMRs working in the shared environment from the perspective of optimization. The collision-avoidance strategy is formulated as an inequality constraint, which has proven to be collision free between the MWMRs. The designed MWMRs control scheme integrates path following, collision-avoidance, and WMR velocity compliance, in which the path following task is chosen as the secondary task, and collision-avoidance is the primary task so that safety can be guaranteed in advance. A Lagrangian-based dynamic controller is constructed for the dominating behavior of the MWMRs. Combining theoretical analyses and experiments, the feasibility of the designed control scheme for the MWMRs is substantiated. Experimental results show that if obstacles do not threaten the safety of the WMR, the top priority in the control task is the target track task. All robots move along the desired trajectory. Once the collision criterion is satisfied, the collision-avoidance mechanism is activated and prominent in the controller. Under the proposed scheme, all robots achieve the target tracking on the premise of being collision free
- …