Optimal Cross-Wind Towing and Power Generation with Tethered Kites

Non-powered flight vehicles such as kites can provide a means of transmitting wind energy from higher altitudes to the ground via tethers. Although there have been many proposals for systems to extract wind energy from higher altitudes, this paper focuses on the use of a light lifting body at the end of a tether to generate useful power. Two major configurations are studied: 1) the kite is used to tow a ground vehicle in the cross-wind direction, 2) the kite is flown to generate power using a ground generator. In both cases, the useful work done by the kite is transmitted to the ground through the tether. Both applications require automatic control of the kite. A simplified system model is used to study the nature of the optimal trajectories of the system for different wind speeds. Numerical results illustrate that optimal power generation requires complex three-dimensional kite trajectories, whereas cross-wind towing requires much simpler trajectories. A feedback tracking controller is demonstrated for tracking the kite trajectories in the presence of unsteady winds

Development of an Indoor Multirotor Testbed for Experimentation on Autonomous Guidance Strategies

Despite the vast popularity of rotary wing unmanned aerial vehicles and research centres that develop their guidance software, there are only a limited number of references that provide an exhaustive description of a step-by-step procedure to build-up a multirotor testbed. In response to such need, the first part of this thesis aims to describe, in detail, the complete procedure to establish and operate an autonomous multirotor unmanned aerial vehicle indoor experimental platform to test and validate guidance, navigation and control strategies. Both hardware and software aspects of the testbed are described to offer a complete understanding of the different aspects. The second part of this thesis focuses on two benchmarks multirotor guidance, navigation and control problems. Initially, the guidance law for an accurate landing manoeuvre is studied. Multirotor usually have a flight time limited to a few minutes. Autonomous landing and docking to a charging station could extend the mission duration of these vehicles. Subsequently, the guidance strategy for the formation flight between two multirotors is considered. In this case, the fundamental goal is an accurate autonomous alignment between two vehicles, each of them behaving as a target and chaser simultaneously. In the last part of this thesis, the problem of minimum energy manoeuvres is tackled. Again, in this case, the motive is to address the limitation in multirotor flight duration. The fundamental objective of this guidance, navigation and control strategy is to determine and implement, in real-time, the minimum energy control histories that transfer the multirotor from its initial point to a given final point. As opposed to conventional guidance strategies, mostly based on proportional-integral-derivative laws, a minimum energy controller allows the vehicle to execute the manoeuvre with a minimum electrical power expenditure

Cooperation of unmanned systems for agricultural applications: A theoretical framework

Agriculture 4.0 comprises a set of technologies that combines sensors, information systems, enhanced machinery, and informed management with the objective of optimising production by accounting for variabilities and uncertainties within agricultural systems. Autonomous ground and aerial vehicles can lead to favourable improvements in management by performing in-field tasks in a time-effective way. In particular, greater benefits can be achieved by allowing cooperation and collaborative action among unmanned vehicles, both aerial and ground, to perform in-field operations in precise and time-effective ways. In this work, the preliminary and crucial step of analysing and understanding the technical and methodological challenges concerning the main problems involved is performed. An overview of the agricultural scenarios that can benefit from using collaborative machines and the corresponding cooperative schemes typically adopted in this framework are presented. A collection of kinematic and dynamic models for different categories of autonomous aerial and ground vehicles is provided, which represents a crucial step in understanding the vehicles behaviour when full autonomy is desired. Last, a collection of the state-of-the-art technologies for the autonomous guidance of drones is provided, summarising their peculiar characteristics, and highlighting their advantages and shortcomings with a specific focus on the Agriculture 4.0 framework. A companion paper reports the application of some of these techniques in a complete case study in sloped vineyards, applying the proposed multi-phase collaborative scheme introduced here