A review of traffic simulation software

Computer simulation of tra c is a widely used method in research of tra c modelling, planning and development of tra c networks and systems. Vehicular tra c systems are of growing concern and interest globally and modelling arbitrarily complex tra c systems is a hard problem. In this article we review some of the tra c simulation software applications, their features and characteristics as well as the issues these applications face. Additionally, we introduce some algorithmic ideas, underpinning data structural approaches and quanti able metrics that can be applied to simulated model systems

The Dark Side(-Channel) of Mobile Devices: A Survey on Network Traffic Analysis

In recent years, mobile devices (e.g., smartphones and tablets) have met an increasing commercial success and have become a fundamental element of the everyday life for billions of people all around the world. Mobile devices are used not only for traditional communication activities (e.g., voice calls and messages) but also for more advanced tasks made possible by an enormous amount of multi-purpose applications (e.g., finance, gaming, and shopping). As a result, those devices generate a significant network traffic (a consistent part of the overall Internet traffic). For this reason, the research community has been investigating security and privacy issues that are related to the network traffic generated by mobile devices, which could be analyzed to obtain information useful for a variety of goals (ranging from device security and network optimization, to fine-grained user profiling). In this paper, we review the works that contributed to the state of the art of network traffic analysis targeting mobile devices. In particular, we present a systematic classification of the works in the literature according to three criteria: (i) the goal of the analysis; (ii) the point where the network traffic is captured; and (iii) the targeted mobile platforms. In this survey, we consider points of capturing such as Wi-Fi Access Points, software simulation, and inside real mobile devices or emulators. For the surveyed works, we review and compare analysis techniques, validation methods, and achieved results. We also discuss possible countermeasures, challenges and possible directions for future research on mobile traffic analysis and other emerging domains (e.g., Internet of Things). We believe our survey will be a reference work for researchers and practitioners in this research field.Comment: 55 page

Traffic microscopic simulation in the town Kyjov

The paper deals with the microscopic simulation in the selected town - Kyjov. Firstly, there is discussed a short literature review about traffic simulation. Secondly, there is an introduced methodology. For this paper was used the simulation software PTV Vissim. This software is mainly for the microscopic simulation. The next part is presented results from the selected intersection in the town Kyjov. Finally, there is simulated construction of the new logistics centre and the impact of the traffic on the chosen intersection in the city

Roundabouts: Traffic Simulations of Connected and Automated Vehicles—A State of the Art

The paper deals with traffic simulation within roundabouts when both “connected and automated vehicles” (CAVs) and human-driven cars are present. The aim is to present the past, current and future research on CAVs running into roundabouts within the Cooperative, Connected and Automated Mobility (CCAM) framework. Both microscopic traffic simulations and virtual reality simulations by dynamic driving simulators will be considered. The paper is divided into five parts. At first, the literature is analysed using the Systematic Literature Review (SLR) methodology based on Scopus database. Secondly, the influence of CAVs on roundabout-specific design features and configuration is analysed. Gap-acceptance models used to define the capacity of the roundabout, one of its most important key performance indicators, are also presented. Third, the most common simulation software are described and analysed in terms of traffic demand implementation. Then the communication approaches and path management algorithms are studied. An example is proposed on the integration of microscopic traffic simulations and dynamic driving simulators virtual reality simulations. Finally, car following models suitable for roundabout traffic are discussed. There is still a gap between simulations and actual experience. There are reasonable doubts on how modelling and optimizing CAVs’ behaviour into roundabouts in view of CCAM. It seems that Cooperative, Connected and Automated Vehicles (CCAVs), more than simply Connected and Automated Vehicles (CAVs), could optimise traffic flow, safety and driving comfort within the roundabout. A very promising technology for traffic simulation within the roundabout seems the one based on dynamic driving simulators

Material Thermal Inputs of Iowa Materials for MEPDG, 2011

The thermal properties of concrete materials, such as coeffi cient of thermal expansion (CTE), thermal conductivity, and heat capacity, are required by the MEPDG program as the material inputs for pavement design. However, a limited amount of test data is available on the thermal properties of concrete in Iowa. The default values provided by the MEPDG program may not be suitable for Iowa concrete, since aggregate characteristics have signifi cant infl uence on concrete thermal properties

A State-of-the-art Integrated Transportation Simulation Platform

Nowadays, universities and companies have a huge need for simulation and modelling methodologies. In the particular case of traffic and transportation, making physical modifications to the real traffic networks could be highly expensive, dependent on political decisions and could be highly disruptive to the environment. However, while studying a specific domain or problem, analysing a problem through simulation may not be trivial and may need several simulation tools, hence raising interoperability issues. To overcome these problems, we propose an agent-directed transportation simulation platform, through the cloud, by means of services. We intend to use the IEEE standard HLA (High Level Architecture) for simulators interoperability and agents for controlling and coordination. Our motivations are to allow multiresolution analysis of complex domains, to allow experts to collaborate on the analysis of a common problem and to allow co-simulation and synergy of different application domains. This paper will start by presenting some preliminary background concepts to help better understand the scope of this work. After that, the results of a literature review is shown. Finally, the general architecture of a transportation simulation platform is proposed

Simulating the Impact of Traffic Calming Strategies

This study assessed the impact of traffic calming measures to the speed, travel times and capacity of residential roadways. The study focused on two types of speed tables, speed humps and a raised crosswalk. A moving test vehicle equipped with GPS receivers that allowed calculation of speeds and determination of speed profiles at 1s intervals were used. Multi-regime model was used to provide the best fit using steady state equations; hence the corresponding speed-flow relationships were established for different calming scenarios. It was found that capacities of residential roadway segments due to presence of calming features ranged from 640 to 730 vph. However, the capacity varied with the spacing of the calming features in which spacing speed tables at 1050 ft apart caused a 23% reduction in capacity while 350-ft spacing reduced capacity by 32%. Analysis showed a linear decrease of capacity of approximately 20 vphpl, 37 vphpl and 34 vphpl when 17 ft wide speed tables were spaced at 350 ft, 700 ft, and 1050 ft apart respectively. For speed hump calming features, spacing humps at 350 ft reduced capacity by about 33% while a 700 ft spacing reduced capacity by 30%. The study concludes that speed tables are slightly better than speed humps in terms of preserving the roadway capacity. Also, traffic calming measures significantly reduce the speeds of vehicles, and it is best to keep spacing of 630 ft or less to achieve desirable crossing speeds of less or equal to 15 mph especially in a street with schools nearby. A microscopic simulation model was developed to replicate the driving behavior of traffic on urban road diets roads to analyze the influence of bus stops on traffic flow and safety. The impacts of safety were assessed using surrogate measures of safety (SSAM). The study found that presence of a bus stops for 10, 20 and 30 s dwell times have almost 9.5%, 12%, and 20% effect on traffic speed reductions when 300 veh/hr flow is considered. A comparison of reduction in speed of traffic on an 11 ft wide road lane of a road diet due to curbside stops and bus bays for a mean of 30s with a standard deviation of 5s dwell time case was conducted. Results showed that a bus stop bay with the stated bus dwell time causes an approximate 8% speed reduction to traffic at a flow level of about 1400 vph. Analysis of the trajectories from bust stop locations showed that at 0, 25, 50, 75, 100, 125, 150, and 175 feet from the intersection the number of conflicts is affected by the presence and location of a curbside stop on a segment with a road diet

Geometrical and functional criteria as a methodological approach to implement a new cycle path in an existing Urban Road Network: A Case study in Rome

Most road accidents occur in urban areas and notably at urban intersections, where cyclists and motorcyclists are the most vulnerable. In the last few years, cycling mobility has been growing; therefore, bike infrastructures should be designed to encourage this type of mobility and reduce motorized and/or private transport. The paper presents a study to implement a new cycle path in the existing cycle and road network in Rome, Italy. The geometric design of the new path complies with Italian standards regarding the technical characteristics of bicycle paths, while the Highway Capacity Manual has been considered for the traffic analysis. In particular, a before-after approach has been adopted to examine and compare the traffic flow at more complex and congested intersections where the cycle path will pass. Trams, buses, cars, bikes and pedestrians were the traffic components considered in each analysis. The software package PTV VISSIM 8 allowed the simulations of traffic flows at traffic-light intersections; an original linear process has been proposed to model dynamic intelligent traffic controls, which are not admitted by the software used. The traffic analysis allowed the identification of the best option for each of the five examined intersections. Particularly, the maximum queue length value and the total number of passed vehicles have been considered in order to optimize the transport planning process. The results of this study highlight the importance of providing engineered solutions when a cycle path is implemented in a complex road network, in order to avoid negative impacts on the citizens and maximize the expected advantages

Detection of Fog Network Data Telemetry Using Data Plane Programming

Fog computing has been introduced to deliver Cloud-based services to the Internet of Things (IoT) devices. It locates geographically closer to IoT devices than Cloud networks and aims at offering latency-critical computation and storage to end-user applications. To leverage Fog computing for computational offloading from end-users, it is important to optimize resources in the Fog nodes dynamically. Provisioning requires knowledge of the current network state, thus, monitoring mechanisms play a significant role to conduct resource management in the network. To keep track of the state of devices, we use P4, a data-plane programming language, to describe data-plane abstraction of Fog network devices and collect telemetry without the intervention of the control plane or adding a big amount of overhead. In this paper, we propose a software-defined architecture with a programmable data plane for data telemetry detection that can be integrated into Fog network resource management. After the implementation of detecting data telemetry based on In-Band Network Telemetry (INT) within a Mininet simulation, we show the available features and preliminary Fog resource management based on the collected data telemetry and future telemetry-based traffic engineering possibilities