Anthropomorphic Twisted String-Actuated Soft Robotic Gripper with Tendon-Based Stiffening

Realizing high-performance soft robotic grippers is challenging because of the inherent limitations of the soft actuators and artificial muscles that drive them, including low force output, small actuation range, and poor compactness. Despite advances in this area, realizing compact soft grippers with high dexterity and force output is still challenging. This paper explores twisted string actuators (TSAs) to drive a soft robotic gripper. TSAs have been used in numerous robotic applications, but their inclusion in soft robots has been limited. The proposed design of the gripper was inspired by the human hand. Tunable stiffness was implemented in the fingers with antagonistic TSAs. The fingers' bending angles, actuation speed, blocked force output, and stiffness tuning were experimentally characterized. The gripper achieved a score of 6 on the Kapandji test and recreated 31 of the 33 grasps of the Feix GRASP taxonomy. It exhibited a maximum grasping force of 72 N, which was almost 13 times its own weight. A comparison study revealed that the proposed gripper exhibited equivalent or superior performance compared to other similar soft grippers.Comment: 19 pages, 15 figure

Compliant, Large-Strain, and Self-Sensing Twisted String Actuators with Applications to Soft Robots

The twisted string actuator (TSA) is a rotary-to-linear transmission system that has been implemented in robots for high force output and efficiency. The basic components of a TSA are a motor, strings, and a load (to keep the strings in tension). The twisting of the strings shortens their length to generate linear contraction. Due to their high force output, energy efficiency, and compact form factor, TSAs hold the potential to improve the performance of soft robots. Currently, it is challenging to realize high-performance soft robots because many existing soft or compliant actuators exhibit limitations such as fabrication complexity, high power consumption, slow actuation, or low force generation. The applications of TSAs in soft robots have hitherto been limited, mainly for two reasons. Firstly, the conventional strings of TSAs are stiff and strong, but not compliant. Secondly, precise control of TSAs predominantly relies on external position or force sensors. For these reasons, TSA-driven robots are often rigid or bulky.To make TSAs more suitable for actuating soft robots, compliant, large-strain, and self-sensing TSAs are developed and applied to various soft robots in this work. The design was realized by replacing conventional inelastic strings with compliant, thermally-activated, and conductive supercoiled polymer (SCP) strings. Self-sensing was realized by correlating the electrical resistance of the strings with their length. Large strains are realized by heating the strings in addition to twisting them. The quasi-static actuation and self-sensing properties are accurately captured by Preisach hysteresis operators. Next, a data-driven mathematical model was proposed and experimentally validated to capture the transient decay, creep, and hysteretic effects in the electrical resistance. This model was then used to predict the length of the TSA, given its resistance. Furthermore, three TSA-driven soft robots were designed and fabricated: a three-fingered gripper, a soft manipulator, and an anthropomorphic gripper. For the three-fingered gripper, its fingers were compliant and designed to exploit the Fin Ray Effect for improved grasping. The soft manipulator was driven by three TSAs that allowed it to bend with arbitrary magnitude and direction. A physics-based modeling strategy was developed to predict this multi-degree-of-freedom motion. The proposed modeling approaches were experimentally verified to be effective. For example, the proposed model predicted bending angle and bending velocity with mean errors of 1.58 degrees (2.63%) and 0.405 degrees/sec (4.31%), respectively. The anthropomorphic gripper contained 11 TSAs; two TSAs were embedded in each of the four fingers and three TSAs were embedded in the thumb. Furthermore, the anthropomorphic gripper achieved tunable stiffness and a wide range of grasps

Design, characterisation and validation of a haptic interface based on twisted string actuation.

This paper presents the design and experimental characterisation of a wrist haptic interface based on a twisted string actuator. The interface is designed for controlled actuation of wrist flexion/extension and is capable of rendering torque feedback through a rotary handle driven by the twisted string actuator and spring-loaded cable mechanisms. The interface was characterised to obtain its static and dynamic haptic feedback rendering capabilities. Compliance in the spring and actuation mechanism makes the interface suitable for smooth rendering of haptic feedback of large magnitudes due to the high motion transmission ratio of the twisted strings. Haptic virtual wall rendering capabilities are demonstrated

Design and Implementation of Innovative Robotic Devices Using Twisted String Actuation (TSA) System

The twisted string actuation system is particularly suitable for very compact, low-cost and light-weight robotic devices, like artificial limbs and exoskeletons, since it allows the implementation of powerful tendon-based driving systems, based on small-size DC motors characterized by high speed, low torque and very limited inertia. The following activities has been done using the Twisted String Actuation System: - The basic properties of the twisted string actuation system. - An ongoing work for verifying the behavior of a twisted string actuator in contact with a sliding surface or guided through a sheath. - The implementation of a variable stiffness joint actuated by a couple of twisted string actuators in antagonistic configuration. - The design and the implementation of a force sensor based on a commercial optoelectronic component called light fork and characterized by the simple construction process. - A twisted string actuation module with an integrated force sensor based on optoelectronic components. - The preliminary experimental study toward the implementation of an arm rehabilitation device based on a twisted string actuation module. - A 6 DoF cable-driven haptic interface for applications in various robotic scenarios. - A wearable hand haptic interface driven by a couple of twisted string actuators

Lightweight means of actuation for use in space-based robotics applications

In the field of robotics many researchers have devoted a large amount of time to pursuing means to reduce the weight of robotic systems. For space robotics, this becomes even more important due to launch cost being directly affected by weight. During review, potential progress involving weight reduction of actuators has been encountered, which it is necessary to investigate further in order to ascertain the potential advantages and disadvantages of such work. The contribution to be put forth here is a review of means by which reductions in weight can be achieved, with particular emphasis on space robotic actuation sub-systems. Ideas will be posited about the possible configurations which could be explored to reduce weight whilst attempting to maintain performance. It is expected that this contribution will provide evidence-based support for some future research directions, and will also help to stimulate discussion and further work on the subject of lightweight robotics and lightweight actuators. The next stages of this project aim to enhance some of the actuation ideas investigated so far, test these comparatively against one another, and critically review them alongside existing lightweight actuation methods. Following this, simulation of actuation concepts being applied to robotic applications will take place. This is in order to evaluate their performance in microgravity environments and to test their versatility. This process, as part of this project, will also be discussed in this pape

Design and Development of a Twisted String Exoskeleton Robot for the Upper Limb

High-intensity and task-specific upper-limb treatment of active, highly repetitive movements are the effective approaches for patients with motor disorders. However, with the severe shortage of medical service in the United States and the fact that post-stroke survivors can continue to incur significant financial costs, patients often choose not to return to the hospital or clinic for complete recovery. Therefore, robot-assisted therapy can be considered as an alternative rehabilitation approach because the similar or better results as the patients who receive intensive conventional therapy offered by professional physicians.;The primary objective of this study was to design and fabricate an effective mobile assistive robotic system that can provide stroke patients shoulder and elbow assistance. To reduce the size of actuators and to minimize the weight that needs to be carried by users, two sets of dual twisted-string actuators, each with 7 strands (1 neutral and 6 effective) were used to extend/contract the adopted strings to drive the rotational movements of shoulder and elbow joints through a Bowden cable mechanism. Furthermore, movements of non-disabled people were captured as templates of training trajectories to provide effective rehabilitation.;The specific aims of this study included the development of a two-degree-of-freedom prototype for the elbow and shoulder joints, an adaptive robust control algorithm with cross-coupling dynamics that can compensate for both nonlinear factors of the system and asynchronization between individual actuators as well as an approach for extracting the reference trajectories for the assistive robotic from non-disabled people based on Microsoft Kinect sensor and Dynamic time warping algorithm. Finally, the data acquisition and control system of the robot was implemented by Intel Galileo and XILINX FPGA embedded system

Hierarchical fibrous structures for muscle-inspired soft-actuators:A review

Inspired by Nature, one of the most ambitious challenge in soft robotics is to design actuators capable of reaching performances comparable to the skeletal muscles. Considering the perfectly balanced features of natural muscular tissue in terms of linear contraction, force‐to‐weight ratio, scalability and morphology, scientists have been working for many years on mimicking this structure. Focusing on the biomimicry, this review investigates the state‐of‐the‐art of synthetic fibrous, muscle‐inspired actuators that, aiming to enhance their mechanical performances, are hierarchically designed from the nanoscale up to the macroscale. In particular, this review focuses on those hierarchical fibrous actuators that enhance their biomimicry employing a linear contraction strategy, closely resembling the skeletal muscles actuation system. The literature analysis shows that bioinspired artificial muscles, developed up to now, only in part comply with skeletal ones. The manipulation and control of the matter at the nanoscale allows to realize ordered structures, such as nanofibers, used as elemental actuators characterized by high strains but moderate force levels. Moreover, it can be foreseen that scaling up the nanostructured materials into micro‐ and macroscale hierarchical structures, it is possible to realize linear actuators characterized by suitable levels of force and displacement

Variable stiffness robotic hand for stable grasp and flexible handling

Robotic grasping is a challenging area in the field of robotics. When interacting with an object, the dynamic properties of the object will play an important role where a gripper (as a system), which has been shown to be stable as per appropriate stability criteria, can become unstable when coupled to an object. However, including a sufficiently compliant element within the actuation system of the robotic hand can increase the stability of the grasp in the presence of uncertainties. This paper deals with an innovative robotic variable stiffness hand design, VSH1, for industrial applications. The main objective of this work is to realise an affordable, as well as durable, adaptable, and compliant gripper for industrial environments with a larger interval of stiffness variability than similar existing systems. The driving system for the proposed hand consists of two servo motors and one linear spring arranged in a relatively simple fashion. Having just a single spring in the actuation system helps us to achieve a very small hysteresis band and represents a means by which to rapidly control the stiffness. We prove, both mathematically and experimentally, that the proposed model is characterised by a broad range of stiffness. To control the grasp, a first-order sliding mode controller (SMC) is designed and presented. The experimental results provided will show how, despite the relatively simple implementation of our first prototype, the hand performs extremely well in terms of both stiffness variability and force controllability

Electromyography Based Human-Robot Interfaces for the Control of Artificial Hands and Wearable Devices

The design of robotic systems is currently facing human-inspired solutions as a road to replicate the human ability and flexibility in performing motor tasks. Especially for control and teleoperation purposes, the human-in-the-loop approach is a key element within the framework know as Human-Robot Interface. This thesis reports the research activity carried out for the design of Human-Robot Interfaces based on the detection of human motion intentions from surface electromyography. The main goal was to investigate intuitive and natural control solutions for the teleoperation of both robotic hands during grasping tasks and wearable devices during elbow assistive applications. The design solutions are based on the human motor control principles and surface electromyography interpretation, which are reviewed with emphasis on the concept of synergies. The electromyography based control strategies for the robotic hand grasping and the wearable device assistance are also reviewed. The contribution of this research for the control of artificial hands rely on the integration of different levels of the motor control synergistic organization, and on the combination of proportional control and machine learning approaches under the guideline of user-centred intuitiveness in the Human-Robot Interface design specifications. From the side of the wearable devices, the control of a novel upper limb assistive device based on the Twisted String Actuation concept is faced. The contribution regards the assistance of the elbow during load lifting tasks, exploring a simplification in the use of the surface electromyography within the design of the Human-Robot Interface. The aim is to work around complex subject-dependent algorithm calibrations required by joint torque estimation methods