Supporting Cyber-Physical Systems with Wireless Sensor Networks: An Outlook of Software and Services

Sensing, communication, computation and control technologies are the essential building blocks of a cyber-physical system (CPS). Wireless sensor networks (WSNs) are a way to support CPS as they provide fine-grained spatial-temporal sensing, communication and computation at a low premium of cost and power. In this article, we explore the fundamental concepts guiding the design and implementation of WSNs. We report the latest developments in WSN software and services for meeting existing requirements and newer demands; particularly in the areas of: operating system, simulator and emulator, programming abstraction, virtualization, IP-based communication and security, time and location, and network monitoring and management. We also reflect on the ongoing efforts in providing dependable assurances for WSN-driven CPS. Finally, we report on its applicability with a case-study on smart buildings

A Real-Time Positioning System of Manufacturing Carriers Deploying Wireless MEMS Accelerometers and Gyroscopes

Modern manufacturing systems face ever-increasing pressure to maximize efficiency of production processes, minimize downtime due to unexpected deviations from normal operation, and maintain agility in dynamic market conditions. Detailed, real-time asset tracking is essential for achieving these goals. Pallets are widely-used for transporting raw materials, intermediate products, and final products in automated assembly and manufacturing lines. A sophisticated pallet monitoring system can provide possibilities for optimizing pallet routing in real time, enable dynamic scheduling changes, and historical traceability required for error diagnosis and repair. Traditionally, pallets are monitored by networks of sensors, such as RFID readers or proximity sensors to collect location data. These sensor networks are rarely dense enough to provide precise continuous data about pallet location. Real-time pallet tracking data is thus limited to recording timestamps at static checkpoints. This thesis presents an asset-aware management tool for continuous pallet location monitoring based on event logs obtained from intelligent wireless devices embedded in each pallet. Each wireless device, equipped with a 3-axis accelerometer and a 3-axis gyroscope, provides accurate information about pallet movement. The raw sensor data is pre-processed into an event stream, which is sent to a server over a 6LoWPAN network. The software developed in this research implements an algorithm for processing event logs to determine exact pallet location using artificial intelligence techniques. Calculated pallet position can be provided to high-level enterprise systems, and to manufacturing execution systems for use in scheduling, routing, and visualization of the production line. Designing the SCADA system was also part of this thesis. The solution was successfully deployed in the FASTory, a 12-cell light assembly line in the Factory Automation Systems and Technologies Laboratory (FAST-lab.) at Tampere University of Technology, as part of eSONIA, a European Commission-cofunded research project on using service-enabled embedded devices for realizing an asset-aware, self-recovering plant. The proposed solution demonstrates a novel approach for continuous, real-time pallet location tracking based on wireless sensors

Sophisticated Batteryless Sensing

Wireless embedded sensing systems have revolutionized scientific, industrial, and consumer applications. Sensors have become a fixture in our daily lives, as well as the scientific and industrial communities by allowing continuous monitoring of people, wildlife, plants, buildings, roads and highways, pipelines, and countless other objects. Recently a new vision for sensing has emerged---known as the Internet-of-Things (IoT)---where trillions of devices invisibly sense, coordinate, and communicate to support our life and well being. However, the sheer scale of the IoT has presented serious problems for current sensing technologies---mainly, the unsustainable maintenance, ecological, and economic costs of recycling or disposing of trillions of batteries. This energy storage bottleneck has prevented massive deployments of tiny sensing devices at the edge of the IoT. This dissertation explores an alternative---leave the batteries behind, and harvest the energy required for sensing tasks from the environment the device is embedded in. These sensors can be made cheaper, smaller, and will last decades longer than their battery powered counterparts, making them a perfect fit for the requirements of the IoT. These sensors can be deployed where battery powered sensors cannot---embedded in concrete, shot into space, or even implanted in animals and people. However, these batteryless sensors may lose power at any point, with no warning, for unpredictable lengths of time. Programming, profiling, debugging, and building applications with these devices pose significant challenges. First, batteryless devices operate in unpredictable environments, where voltages vary and power failures can occur at any time---often devices are in failure for hours. Second, a device\u27s behavior effects the amount of energy they can harvest---meaning small changes in tasks can drastically change harvester efficiency. Third, the programming interfaces of batteryless devices are ill-defined and non- intuitive; most developers have trouble anticipating the problems inherent with an intermittent power supply. Finally, the lack of community, and a standard usable hardware platform have reduced the resources and prototyping ability of the developer. In this dissertation we present solutions to these challenges in the form of a tool for repeatable and realistic experimentation called Ekho, a reconfigurable hardware platform named Flicker, and a language and runtime for timely execution of intermittent programs called Mayfly

Global traceability

The use of Ultra High Frequency (UHF) Radio Frequency Identification (RFID) in supply chain management (SCM) systems was a big source for optimism. However, the expected rapid industry adoption of RFID did not take place. This research explores some of the existing challenges and obstacles to RFID adoption, such as the lack of consistent UHF spectrum regulations for RFID or the absence of standards that promote integration with Automatic Identification and Data Capture (AIDC) media. As a conclusion, in this project we suggest some solutions to these challenges in the use of multi-frequency RFID tags that can be read at more that one frequency or novel migration strategies and standards that would help expand the industry.Outgoin

UWB localization with battery-powered wireless backbone for drone-based inventory management

Current inventory-taking methods (counting stocks and checking correct placements) in large vertical warehouses are mostly manual, resulting in (i) large personnel costs, (ii) human errors and (iii) incidents due to working at large heights. To remedy this, the use of autonomous indoor drones has been proposed. However, these drones require accurate localization solutions that are easy to (temporarily) install at low costs in large warehouses. To this end, we designed a Ultra-Wideband (UWB) solution that uses infrastructure anchor nodes that do not require any wired backbone and can be battery powered. The resulting system has a theoretical update rate of up to 2892 Hz (assuming no hardware dependent delays). Moreover, the anchor nodes have an average current consumption of only 27 mA (compared to 130 mA of traditional UWB infrastructure nodes). Finally, the system has been experimentally validated and is available as open-source software

A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks

In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs

An Energy Aware and Secure MAC Protocol for Tackling Denial of Sleep Attacks in Wireless Sensor Networks

Wireless sensor networks which form part of the core for the Internet of Things consist of resource constrained sensors that are usually powered by batteries. Therefore, careful energy awareness is essential when working with these devices. Indeed,the introduction of security techniques such as authentication and encryption, to ensure confidentiality and integrity of data, can place higher energy load on the sensors. However, the absence of security protection c ould give room for energy drain attacks such as denial of sleep attacks which have a higher negative impact on the life span ( of the sensors than the presence of security features. This thesis, therefore, focuses on tackling denial of sleep attacks from two perspectives A security perspective and an energy efficiency perspective. The security perspective involves evaluating and ranking a number of security based techniques to curbing denial of sleep attacks. The energy efficiency perspective, on the other hand, involves exploring duty cycling and simulating three Media Access Control ( protocols Sensor MAC, Timeout MAC andTunableMAC under different network sizes and measuring different parameters such as the Received Signal Strength RSSI) and Link Quality Indicator ( Transmit power, throughput and energy efficiency Duty cycling happens to be one of the major techniques for conserving energy in wireless sensor networks and this research aims to answer questions with regards to the effect of duty cycles on the energy efficiency as well as the throughput of three duty cycle protocols Sensor MAC ( Timeout MAC ( and TunableMAC in addition to creating a novel MAC protocol that is also more resilient to denial of sleep a ttacks than existing protocols. The main contributions to knowledge from this thesis are the developed framework used for evaluation of existing denial of sleep attack solutions and the algorithms which fuel the other contribution to knowledge a newly developed protocol tested on the Castalia Simulator on the OMNET++ platform. The new protocol has been compared with existing protocols and has been found to have significant improvement in energy efficiency and also better resilience to denial of sleep at tacks Part of this research has been published Two conference publications in IEEE Explore and one workshop paper

Reliable Communication in Wireless Networks

Wireless communication systems are increasingly being used in industries and infrastructures since they offer significant advantages such as cost effectiveness and scalability with respect to wired communication system. However, the broadcast feature and the unreliable links in the wireless communication system may cause more communication collisions and redundant transmissions. Consequently, guaranteeing reliable and efficient transmission in wireless communication systems has become a big challenging issue. In particular, analysis and evaluation of reliable transmission protocols in wireless sensor networks (WSNs) and radio frequency identification system (RFID) are strongly required. This thesis proposes to model, analyze and evaluate self-configuration algorithms in wireless communication systems. The objective is to propose innovative solutions for communication protocols in WSNs and RFID systems, aiming at optimizing the performance of the algorithms in terms of throughput, reliability and power consumption. The first activity focuses on communication protocols in WSNs, which have been investigated, evaluated and optimized, in order to ensure fast and reliable data transmission between sensor nodes. The second research topic addresses the interference problem in RFID systems. The target is to evaluate and develop precise models for accurately describing the interference among readers. Based on these models, new solutions for reducing collision in RFID systems have been investigated