Development of a reconfigurable assembly system with enhanced control capabilities and virtual commissioning

Thesis (M. Tech. (Engineering: Electrical)) -- Central University of technology, Free State, 2013The South African (SA) manufacturing industry requires developing similar levels of sophistication and expertise in automation as its international rivals to compete for global markets. To achieve this, manufacturing plants need to be managed extremely efficiently to ensure the quality of manufactured products and these plants must also have the relevant infrastructure. Furthermore, this industry must also compensate for rapid product introduction, product changes and short product lifespan. To support this need, this industry must engage in the current trend in automation known as reconfigurable manufacturing. The aim of the study is to develop a reconfigurable assembly system with enhanced control capabilities by utilizing virtual commissioning. In addition, this system must be capable of assembling multiple different products of a product range; reconfigure to accommodate the requirements of these products; autonomously reroute the product flow and distribute workload among assembly cells; handle erroneous products; and implement enhanced control methods. To achieve this, a literature study was done to confirm the type of components to be used, reveal design issues and what characteristics such a system must adhere to. Software named DELMIA was used to create a virtual simulation environment to verify the system and simultaneously scrutinize the methods of verification. On completion, simulations were conducted to verify software functions, device movements and operations, and the control software of the system. Based on simulation results, the physical system was built, and then verified with a multi agent system as overhead control to validate the entire system. The final results showed that the project objectives are achievable and it was also found that DELMIA is an excellent tool for system verification and will expedite the design of a system. By obtaining these results it is indicated that companies can design and verify their systems earlier through virtual commissioning. In addition, their systems will be more flexible, new products or product changes can be introduced more frequently, with minimum cost and downtime. This will enable SA manufacturing companies to be more competitive, ensure increased productivity, save time and so ensure them an advantage over their international competition

Application of multi-agents to power distribution systems

The electric power system has become a very complicated network at present because of re-structuring and the penetration of distributed energy resources. In addition, due to increasing demand for power, issues such as transmission congestion have made the power system stressed. A single fault can lead to massive cascading effects, affecting the power supply and power quality. An overall solution for these issues can be obtained by a new artificial intelligent mechanism called the multi-agent system. A multi-agent system is a collection of agents, which senses the environmental changes and acts diligently on the environment in order to achieve its objectives. Due to the increasing speed and decreasing cost in communication and computation of complex matrices, multi-agent system promise to be a viable solution for today\u27s intrinsic network problems.;A multi-agent system model for fault detection and reconfiguration is presented in this thesis. These models are developed based on graph theory and mathematical programming. A mathematical model is developed to specify the objective function and the constraints.;The multi-agent models are simulated in Java Agent Development Framework and MatlabRTM and are applied to the power system model designed in the commercial software, Distributed Engineering Workstation(c) . The circuit that is used to model the power distribution system is the Circuit of the Future, developed by Southern California Edison.;The multi-agent system model can precisely detect the fault location and according to the type of fault, it reconfigures the system to supply as much load as possible by satisfying the power balance and line capacity constraints. The model is also capable of handling the assignment of load priorities.;All possible fault cases were tested and a few critical test scenarios are presented in this thesis. The results obtained were promising and were as expected

Developing a distributed electronic health-record store for India

The DIGHT project is addressing the problem of building a scalable and highly available information store for the Electronic Health Records (EHRs) of the over one billion citizens of India

Machine learning and its applications in reliability analysis systems

In this thesis, we are interested in exploring some aspects of Machine Learning (ML) and its application in the Reliability Analysis systems (RAs). We begin by investigating some ML paradigms and their- techniques, go on to discuss the possible applications of ML in improving RAs performance, and lastly give guidelines of the architecture of learning RAs. Our survey of ML covers both levels of Neural Network learning and Symbolic learning. In symbolic process learning, five types of learning and their applications are discussed: rote learning, learning from instruction, learning from analogy, learning from examples, and learning from observation and discovery. The Reliability Analysis systems (RAs) presented in this thesis are mainly designed for maintaining plant safety supported by two functions: risk analysis function, i.e., failure mode effect analysis (FMEA) ; and diagnosis function, i.e., real-time fault location (RTFL). Three approaches have been discussed in creating the RAs. According to the result of our survey, we suggest currently the best design of RAs is to embed model-based RAs, i.e., MORA (as software) in a neural network based computer system (as hardware). However, there are still some improvement which can be made through the applications of Machine Learning. By implanting the 'learning element', the MORA will become learning MORA (La MORA) system, a learning Reliability Analysis system with the power of automatic knowledge acquisition and inconsistency checking, and more. To conclude our thesis, we propose an architecture of La MORA

Design of a Multi-Agent System for Process Monitoring and Supervision

New process monitoring and control strategies are developing every day together with process automation strategies to satisfy the needs of diverse industries. New automation systems are being developed with more capabilities for safety and reliability issues. Fault detection and diagnosis, and process monitoring and supervision are some of the new and promising growth areas in process control. With the help of the development of powerful computer systems, the extensive amount of process data from all over the plant can be put to use in an efficient manner by storing and manipulation. With this development, data-driven process monitoring approaches had the chance to emerge compared to model-based process monitoring approaches, where the quantitative model is known as a priori knowledge. Therefore, the objective of this research is to layout the basis for designing and implementing a multi-agent system for process monitoring and supervision. The agent-based programming approach adopted in our research provides a number of advantages, such as, flexibility, adaptation and ease of use. In its current status, the designed multi-agent system architecture has the three different functionalities ready for use for process monitoring and supervision. It allows: a) easy manipulation and preprocessing of plant data both for training and online application; b) detection of process faults; and c) diagnosis of the source of the fault. In addition, a number of alternative data driven techniques were implemented to perform monitoring and supervision tasks: Principal Component Analysis (PCA), Fisher Discriminant Analysis (FDA), and Self-Organizing Maps (SOM). The process system designed in this research project is generic in the sense that it can be used for multiple applications. The process monitoring system is successfully tested with Tennessee Eastman Process application. Fault detection rates and fault diagnosis rates are compared amongst PCA, FDA, and SOM for different faults using the proposed framework

Fault-based Analysis of Industrial Cyber-Physical Systems

The fourth industrial revolution called Industry 4.0 tries to bridge the gap between traditional Electronic Design Automation (EDA) technologies and the necessity of innovating in many indus- trial fields, e.g., automotive, avionic, and manufacturing. This complex digitalization process in- volves every industrial facility and comprises the transformation of methodologies, techniques, and tools to improve the efficiency of every industrial process. The enhancement of functional safety in Industry 4.0 applications needs to exploit the studies related to model-based and data-driven anal- yses of the deployed Industrial Cyber-Physical System (ICPS). Modeling an ICPS is possible at different abstraction levels, relying on the physical details included in the model and necessary to describe specific system behaviors. However, it is extremely complicated because an ICPS is com- posed of heterogeneous components related to different physical domains, e.g., digital, electrical, and mechanical. In addition, it is also necessary to consider not only nominal behaviors but even faulty behaviors to perform more specific analyses, e.g., predictive maintenance of specific assets. Nevertheless, these faulty data are usually not present or not available directly from the industrial machinery. To overcome these limitations, constructing a virtual model of an ICPS extended with different classes of faults enables the characterization of faulty behaviors of the system influenced by different faults. In literature, these topics are addressed with non-uniformly approaches and with the absence of standardized and automatic methodologies for describing and simulating faults in the different domains composing an ICPS. This thesis attempts to overcome these state-of-the-art gaps by proposing novel methodologies, techniques, and tools to: model and simulate analog and multi-domain systems; abstract low-level models to higher-level behavioral models; and monitor industrial systems based on the Industrial Internet of Things (IIOT) paradigm. Specifically, the proposed contributions involve the exten- sion of state-of-the-art fault injection practices to improve the ICPSs safety, the development of frameworks for safety operations automatization, and the definition of a monitoring framework for ICPSs. Overall, fault injection in analog and digital models is the state of the practice to en- sure functional safety, as mentioned in the ISO 26262 standard specific for the automotive field. Starting from state-of-the-art defects defined for analog descriptions, new defects are proposed to enhance the IEEE P2427 draft standard for analog defect modeling and coverage. Moreover, dif- ferent techniques to abstract a transistor-level model to a behavioral model are proposed to speed up the simulation of faulty circuits. Therefore, unlike the electrical domain, there is no extensive use of fault injection techniques in the mechanical one. Thus, extending the fault injection to the mechanical and thermal fields allows for supporting the definition and evaluation of more reliable safety mechanisms. Hence, a taxonomy of mechanical faults is derived from the electrical domain by exploiting the physical analogies. Furthermore, specific tools are built for automatically instru- menting different descriptions with multi-domain faults. The entire work is proposed as a basis for supporting the creation of increasingly resilient and secure ICPS that need to preserve functional safety in any operating context

Fourth Conference on Artificial Intelligence for Space Applications

Proceedings of a conference held in Huntsville, Alabama, on November 15-16, 1988. The Fourth Conference on Artificial Intelligence for Space Applications brings together diverse technical and scientific work in order to help those who employ AI methods in space applications to identify common goals and to address issues of general interest in the AI community. Topics include the following: space applications of expert systems in fault diagnostics, in telemetry monitoring and data collection, in design and systems integration; and in planning and scheduling; knowledge representation, capture, verification, and management; robotics and vision; adaptive learning; and automatic programming

Service Quality Assessment for Cloud-based Distributed Data Services

The issue of less-than-100% reliability and trust-worthiness of third-party controlled cloud components (e.g., IaaS and SaaS components from different vendors) may lead to laxity in the QoS guarantees offered by a service-support system S to various applications. An example of S is a replicated data service to handle customer queries with fault-tolerance and performance goals. QoS laxity (i.e., SLA violations) may be inadvertent: say, due to the inability of system designers to model the impact of sub-system behaviors onto a deliverable QoS. Sometimes, QoS laxity may even be intentional: say, to reap revenue-oriented benefits by cheating on resource allocations and/or excessive statistical-sharing of system resources (e.g., VM cycles, number of servers). Our goal is to assess how well the internal mechanisms of S are geared to offer a required level of service to the applications. We use computational models of S to determine the optimal feasible resource schedules and verify how close is the actual system behavior to a model-computed \u27gold-standard\u27. Our QoS assessment methods allow comparing different service vendors (possibly with different business policies) in terms of canonical properties: such as elasticity, linearity, isolation, and fairness (analogical to a comparative rating of restaurants). Case studies of cloud-based distributed applications are described to illustrate our QoS assessment methods. Specific systems studied in the thesis are: i) replicated data services where the servers may be hosted on multiple data-centers for fault-tolerance and performance reasons; and ii) content delivery networks to geographically distributed clients where the content data caches may reside on different data-centers. The methods studied in the thesis are useful in various contexts of QoS management and self-configurations in large-scale cloud-based distributed systems that are inherently complex due to size, diversity, and environment dynamicity