Benefits of global earth observation missions for disaggregation of exposure data and earthquake loss modeling: evidence from Santiago de Chile

Exposure is an essential component of risk models and describes elements that are endangered by a hazard and susceptible to damage. The associated vulnerability characterizes the likelihood of experiencing damage (which can translate into losses) at a certain level of hazard intensity. Frequently, the compilation of exposure information is the costliest component (in terms of time and labor) of risk assessment procedures. Existing models often describe exposure in an aggregated manner, e.g., by relying on statistical/census data for given administrative entities. Nowadays, earth observation techniques allow the collection of spatially continuous information for large geographic areas while enabling a high geometric and temporal resolution. Consequently, we exploit measurements from the earth observation missions TanDEM-X and Sentinel-2, which collect data on a global scale, to characterize the built environment in terms of constituting morphologic properties, namely built-up density and height. Subsequently, we use this information to constrain existing exposure data in a spatial disaggregation approach. Thereby, we establish dasymetric methods for disaggregation. The results are presented for the city of Santiago de Chile, which is prone to natural hazards such as earthquakes. We present loss estimations due to seismic ground shaking and corresponding sensitivity as a function of the resolution properties of the exposure data used in the model. The experimental results underline the benefits of deploying modern earth observation technologies for refined exposure mapping and related earthquake loss estimation with enhanced accuracy properties

Earth observation-based disaggregation of exposure data for earthquake loss modelling

We use TanDEM-X and Sentinel-2 observations to disaggregate earthquake risk-related exposure data. We use the refined exposure data and model earthquake loss. Results for the city of Santiago de Chile show that earthquake risk has been underestimated before due to aggregated exposure data

Earth observation-based disaggregation of exposure data for earthquake loss modeling

We use TanDEM-X and Sentinel-2 observations to disaggregate earthquake risk-related exposure data. We use the refined exposure data and model earthquake loss. Results for the city of Santiago de Chile show that earthquake risk has been underestimated before due to aggregated exposure data

Large-scale 3D Modelling of the Built Environment - Joint Analysis of TanDEM-X, Sentinel-2 and Open Street Map Data

Continental to global scale mapping of the human settlement extent based on earth observation satellite data has made considerable progress. Nevertheless, the current approaches only provide a two-dimensional representation of the built environment. Therewith, a full characterization is restricted in terms of the urban morphology and built-up density, which can only be gained by a detailed examination of the vertical settlement extent. This paper introduces a methodology for the extraction of three-dimensional (3D) information on human settlements by analyzing the digital elevation and radar intensity data collected by the German TanDEM-X satellite mission in combination with multispectral Sentinel-2 imagery and data from the Open Street Map initiative and the Global Urban Footprint human settlement mask. The first module of the underlying processor generates a normalized digital surface model from the TanDEM-X digital elevation model for all regions marked as a built-up area by the Global Urban Footprint. The second module generates a building mask based on a joint processing of Open Street Map, TanDEM-X/TerraSAR-X radar images, the calculated normalized digital surface model and Sentinel-2 imagery. Finally, a third module allocates the local relative heights of the normalized digital surface model to the building structures provided by the building mask. The outcome of the procedure is a 3D map of the built environment showing the estimated local height for all identified vertical building structures at 12 m spatial resolution. The results of a first validation campaign based on reference data collected for the seven cities of Amsterdam (NL), Indianapolis (US), Kigali (RW), Munich (DE), New York (US), Vienna (AT), and Washington (US) indicate the potential of the proposed methodology to accurately estimate the distribution of building heights within the built-up area

Remote sensing contributing to assess earthquake risk: from a literature review towards a roadmap

Remote sensing data and methods are widely deployed in order to contribute to the assessment of numerous components of earthquake risk. While for earthquake hazardrelated investigations, the use of remotely sensed data is an established methodological element with a long research tradition, earthquake vulnerability–centred assessments incorporating remote sensing data are increasing primarily in recent years. This goes along with a changing perspective of the scientific community which considers the assessment of vulnerability and its constituent elements as a pivotal part of a comprehensive risk analysis. Thereby, the availability of new sensors systems enables an appreciable share of remote sensing first. In this manner, a survey of the interdisciplinary conceptual literature dealing with the scientific perception of risk, hazard and vulnerability reveals the demand for a comprehensive description of earthquake hazards as well as an assessment of the present and future conditions of the elements exposed. A review of earthquake-related remote sensing literature, realized both in a qualitative and quantitative manner, shows the already existing and published manifold capabilities of remote sensing contributing to assess earthquake risk. These include earthquake hazard-related analysis such as detection and measurement of lineaments and surface deformations in pre- and post-event applications. Furthermore, pre-event seismic vulnerability–centred assessment of the built and natural environment and damage assessments for post-event applications are presented. Based on the review and the discussion of scientific trends and current research projects, first steps towards a roadmap for remote sensing are drawn, explicitly taking scientific, technical, multi- and transdisciplinary as well as political perspectives into account, which is intended to open possible future research activities

Remote Sensing and Geosciences for Archaeology

This book collects more than 20 papers, written by renowned experts and scientists from across the globe, that showcase the state-of-the-art and forefront research in archaeological remote sensing and the use of geoscientific techniques to investigate archaeological records and cultural heritage. Very high resolution satellite images from optical and radar space-borne sensors, airborne multi-spectral images, ground penetrating radar, terrestrial laser scanning, 3D modelling, Geographyc Information Systems (GIS) are among the techniques used in the archaeological studies published in this book. The reader can learn how to use these instruments and sensors, also in combination, to investigate cultural landscapes, discover new sites, reconstruct paleo-landscapes, augment the knowledge of monuments, and assess the condition of heritage at risk. Case studies scattered across Europe, Asia and America are presented: from the World UNESCO World Heritage Site of Lines and Geoglyphs of Nasca and Palpa to heritage under threat in the Middle East and North Africa, from coastal heritage in the intertidal flats of the German North Sea to Early and Neolithic settlements in Thessaly. Beginners will learn robust research methodologies and take inspiration; mature scholars will for sure derive inputs for new research and applications

Improving Flood Detection and Monitoring through Remote Sensing

As climate-change- and human-induced floods inflict increasing costs upon the planet, both in terms of lives and environmental damage, flood monitoring tools derived from remote sensing platforms have undergone improvements in their performance and capabilities in terms of spectral, spatial and temporal extents and resolutions. Such improvements raise new challenges connected to data analysis and interpretation, in terms of, e.g., effectively discerning the presence of floodwaters in different land-cover types and environmental conditions or refining the accuracy of detection algorithms. In this sense, high expectations are placed on new methods that integrate information obtained from multiple techniques, platforms, sensors, bands and acquisition times. Moreover, the assessment of such techniques strongly benefits from collaboration with hydrological and/or hydraulic modeling of the evolution of flood events. The aim of this Special Issue is to provide an overview of recent advancements in the state of the art of flood monitoring methods and techniques derived from remotely sensed data

Advancing large-scale analysis of human settlements and their dynamics

Due to the importance for a range of sustainability challenges, it is important to understand the spatial dynamics of human settlements. The rapid expansion of built-up land is among the most extensive global land changes, even though built-up land occupies only a small fraction of the terrestrial biosphere. Moreover, the different ways in which human settlements are manifested are crucially important for their environmental and socioeconomic impacts. Yet, current analysis of human settlements heavily relies on land cover datasets, which typically have only one class to represent human settlements. Consequently, the analysis of human settlements does often not account for the heterogeneity within urban environment or their subtle changes. This simplistic representation severely limits our understanding of change processes in human settlements, as well as our capacity to assess socioeconomic and environmental impacts. This thesis aims to advance large-scale analysis of human settlements and their dynamics through the lens of land systems, with a specific focus on the role of land-use intensity. Chapter 2 explores the use of human settlement systems as an approach to understanding their variation in space and changes over time. Results show that settlement systems exist along a density gradient, and their change trajectories are typically gradual and incremental. In addition, results indicate that the total increase in built-up land in village landscapes outweighs that of dense urban regions. This chapter suggests that we should characterize human settlements more comprehensively to advance the analysis of human settlements, going beyond the emergence of new built-up land in a few mega-cities only. In Chapter 3, urban land-use intensity is operationalized by the horizontal and vertical spatial patterns of buildings. Particularly, I trained three random forest models to estimate building footprint, height, and volume, respectively, at a 1-km resolution for Europe, the US, and China. The models yield R2 values of 0.90, 0.81, and 0.88 for building footprint, height, and volume, respectively. The correlation between building footprint and building height at a pixel level was 0.66, illustrating the relevance of mapping these properties independently. Chapter 4 builds on the methodological approach presented in chapter 3. Specifically, it presents an improved approach to mapping 3D built-up patterns (i.e., 3D building structure), and applies this to map building footprint, height, and volume at a global scale. The methodological improvement includes an optimized model structure, additional explanatory variables, and updated input data. I find distance decay functions from the centre of the city to its outskirts for all three properties for major cities in all continents. Yet, again, the height, footprint (density), and volume differ drastically across these cities. Chapter 5 uses built-up land per person as an operationalization for urban land-use intensity, in order to investigate its temporal dynamics at a global scale. Results suggest that the decrease of urban land-use intensity relates to 38.3%, 49.6%, and 37.5% of the built-up land expansion in the three periods during 1975-2015, but with large local variations. In the Global South, densification often happens in regions where human settlements are already used intensively, suggesting potential trade-offs with other living standards. These chapters represent the recent advancements in large-scale analysis of human settlements by revealing a large variation in urban fabric. Urban densification is widely acknowledged as one of the tangible solutions to satisfy the increased land demand for human settlement while conserving other land, suggesting the relevance of these findings to inform sustainable development. Nevertheless, local settlement trajectories towards intensive forms should also be guided in a large-scale context with broad considerations, including the quality of life for inhabitants, because these trade-offs and synergies remain largely unexplored in this analysis

Derivation of forest inventory parameters from high-resolution satellite imagery for the Thunkel area, Northern Mongolia. A comparative study on various satellite sensors and data analysis techniques.

With the demise of the Soviet Union and the transition to a market economy starting in the 1990s, Mongolia has been experiencing dramatic changes resulting in social and economic disparities and an increasing strain on its natural resources. The situation is exacerbated by a changing climate, the erosion of forestry related administrative structures, and a lack of law enforcement activities. Mongolia’s forests have been afflicted with a dramatic increase in degradation due to human and natural impacts such as overexploitation and wildfire occurrences. In addition, forest management practices are far from being sustainable. In order to provide useful information on how to viably and effectively utilise the forest resources in the future, the gathering and analysis of forest related data is pivotal. Although a National Forest Inventory was conducted in 2016, very little reliable and scientifically substantiated information exists related to a regional or even local level. This lack of detailed information warranted a study performed in the Thunkel taiga area in 2017 in cooperation with the GIZ. In this context, we hypothesise that (i) tree species and composition can be identified utilising the aerial imagery, (ii) tree height can be extracted from the resulting canopy height model with accuracies commensurate with field survey measurements, and (iii) high-resolution satellite imagery is suitable for the extraction of tree species, the number of trees, and the upscaling of timber volume and basal area based on the spectral properties. The outcomes of this study illustrate quite clearly the potential of employing UAV imagery for tree height extraction (R2 of 0.9) as well as for species and crown diameter determination. However, in a few instances, the visual interpretation of the aerial photographs were determined to be superior to the computer-aided automatic extraction of forest attributes. In addition, imagery from various satellite sensors (e.g. Sentinel-2, RapidEye, WorldView-2) proved to be excellently suited for the delineation of burned areas and the assessment of tree vigour. Furthermore, recently developed sophisticated classifying approaches such as Support Vector Machines and Random Forest appear to be tailored for tree species discrimination (Overall Accuracy of 89%). Object-based classification approaches convey the impression to be highly suitable for very high-resolution imagery, however, at medium scale, pixel-based classifiers outperformed the former. It is also suggested that high radiometric resolution bears the potential to easily compensate for the lack of spatial detectability in the imagery. Quite surprising was the occurrence of dark taiga species in the riparian areas being beyond their natural habitat range. The presented results matrix and the interpretation key have been devised as a decision tool and/or a vademecum for practitioners. In consideration of future projects and to facilitate the improvement of the forest inventory database, the establishment of permanent sampling plots in the Mongolian taigas is strongly advised.2021-06-0