Towards integrating Quantize-Map-Forward relaying into LTE

We present a method to integrate the Quantize-Map-Forward (QMF) relaying scheme [1] into the standard LTE operation, for a two-relay diamond network configuration. Our approach implements QMF using mainly existing LTE modules and functionalities, and results in minimal changes in the standard link-layer LTE operation. In particular, the destination operation is only affected in that we adapt the log-likelihood ratio (LLR) calculations at the decoder input to take into account the existence of relays; thus, the decoding complexity and operations (apart the LLR calculations) are not modified. We report extensive performance evaluations of our scheme using the OpenAirInterface (OAI) link-level simulation tools.(1

A Comprehensive Overview on 5G-and-Beyond Networks with UAVs: From Communications to Sensing and Intelligence

Due to the advancements in cellular technologies and the dense deployment of cellular infrastructure, integrating unmanned aerial vehicles (UAVs) into the fifth-generation (5G) and beyond cellular networks is a promising solution to achieve safe UAV operation as well as enabling diversified applications with mission-specific payload data delivery. In particular, 5G networks need to support three typical usage scenarios, namely, enhanced mobile broadband (eMBB), ultra-reliable low-latency communications (URLLC), and massive machine-type communications (mMTC). On the one hand, UAVs can be leveraged as cost-effective aerial platforms to provide ground users with enhanced communication services by exploiting their high cruising altitude and controllable maneuverability in three-dimensional (3D) space. On the other hand, providing such communication services simultaneously for both UAV and ground users poses new challenges due to the need for ubiquitous 3D signal coverage as well as the strong air-ground network interference. Besides the requirement of high-performance wireless communications, the ability to support effective and efficient sensing as well as network intelligence is also essential for 5G-and-beyond 3D heterogeneous wireless networks with coexisting aerial and ground users. In this paper, we provide a comprehensive overview of the latest research efforts on integrating UAVs into cellular networks, with an emphasis on how to exploit advanced techniques (e.g., intelligent reflecting surface, short packet transmission, energy harvesting, joint communication and radar sensing, and edge intelligence) to meet the diversified service requirements of next-generation wireless systems. Moreover, we highlight important directions for further investigation in future work.Comment: Accepted by IEEE JSA

Physical Layer Cooperation:Theory and Practice

Information theory has long pointed to the promise of physical layer cooperation in boosting the spectral efficiency of wireless networks. Yet, the optimum relaying strategy to achieve the network capacity has till date remained elusive. Recently however, a relaying strategy termed Quantize-Map-and-Forward (QMF) was proved to achieve the capacity of arbitrary wireless networks within a bounded additive gap. This thesis contributes to the design, analysis and implementation of QMF relaying by optimizing its performance for small relay networks, proposing low-complexity iteratively decodable codes, and carrying out over-the-air experiments using software-radio testbeds to assess real-world potential and competitiveness. The original QMF scheme has each relay performing the same operation, agnostic to the network topology and the channel state information (CSI); this facilitates the analysis for arbitrary networks, yet comes at a performance penalty for small networks and medium SNR regimes. In this thesis, we demonstrate the benefits one can gain for QMF if we optimize its performance by leveraging topological and channel state information. We show that for the N-relay diamond network, by taking into account topological information, we can exponentially reduce the QMF additive approximation gap from $\Theta(N)$ bits/s/Hz to $\Theta(\log N)$ bits/s/Hz, while for the one-relay and two-relay networks, use of topological information and CSI can help to gain as much as $6$ dB. Moreover, we explore what benefits we can realize if we jointly optimize QMF and half-duplex scheduling, as well as if we employ hybrid schemes that combine QMF and Decode-and-Forward (DF) relay operations. To take QMF from being a purely information-theoretic idea to an implementable strategy, we derive a structure employing Low-Density-Parity-Check (LDPC) ensembles for the relay node operations and message-passing algorithms for decoding. We demonstrate through extensive simulation results over the full-duplex diamond network, that our designs offer a robust performance over fading channels and achieves the full diversity order of our network at moderate SNRs. Next, we explore the potential real-world impact of QMF and present the design and experimental evaluation of a wireless system that exploits relaying in the context of WiFi. We deploy three main competing strategies that have been proposed for relaying, Amplify-and-Forward (AF), DF and QMF, on the WarpLab software radio platform. We present experimental results--to the best of our knowledge, the first ones--that compare QMF, AF and DF in a realistic indoor setting. We find that QMF is a competitive scheme to the other two, offering in some cases up to 12% throughput benefits and up to 60% improvement in frame error-rates over the next best scheme. We then present a more advanced architecture for physical layer cooperation (termed QUILT), that seamlessly adapts to the underlying network configuration to achieve competitive or better performance than the best current approaches. It combines on-demand, opportunistic use of DF or QMF followed by interleaving at the relay, with hybrid decoding at the destination that extracts information from even potentially undecodable received frames. We theoretically quantify how our design choices affect the system performance. We also deploy QUILT on WarpLab and show through over-the-air experiments up to $5$ times FER improvement over the next best cooperative protocol

Novel Physical Layer Authentication Techniques for Secure Wireless Communications

Due to the open nature of radio propagation, information security in wireless communications has been facing more challenges compared to its counterpart in wired networks. Authentication, defined as an important aspect of information security, is the process of verifying the identity of transmitters to prevent against spoofing attacks. Traditionally, secure wireless communications is achieved by relying solely upon higher layer cryptographic mechanisms. However, cryptographic approaches based on complex mathematical calculations are inefficient and vulnerable to various types of attacks. Recently, researchers have shown that the unique properties of wireless channels can be exploited for authentication enhancement by providing additional security protection against spoofing attacks. Motivated by the vulnerability of existing higher-layer security techniques and the security advantages provided by exploring the physical link properties, five novel physical layer authentication techniques to enhance the security performance of wireless systems are proposed. The first technique exploits the inherent properties of CIR to achieve robust channel-based authentication. The second and third techniques utilize a long-range channel predictor and additional multipath delay characteristics, respectively, to enhance the CIR-based authentication. The fourth technique exploits the advantages of AF cooperative relaying to improve traditional channel-based authentication. The last technique employs an embedded confidential signaling link to secure the legitimate transmissions in OFDM systems

Low Complexity Scheduling and Coding for Wireless Networks

The advent of wireless communication technologies has created a paradigm shift in the accessibility of communication. With it has come an increased demand for throughput, a trend that is likely to increase further in the future. A key aspect of these challenges is to develop low complexity algorithms and architectures that can take advantage of the nature of the wireless medium like broadcasting and physical layer cooperation. In this thesis, we consider several problems in the domain of low complexity coding, relaying and scheduling for wireless networks. We formulate the Pliable Index Coding problem that models a server trying to send one or more new messages over a noiseless broadcast channel to a set of clients that already have a subset of messages as side information. We show through theoretical bounds and algorithms, that it is possible to design short length codes, poly-logarithmic in the number of clients, to solve this problem. The length of the codes are exponentially better than those possible in a traditional index coding setup. Next, we consider several aspects of low complexity relaying in half-duplex diamond networks. In such networks, the source transmits information to the destination through $n$ half-duplex intermediate relays arranged in a single layer. The half-duplex nature of the relays implies that they can either be in a listening or transmitting state at any point of time. To achieve high rates, there is an additional complexity of optimizing the schedule (i.e. the relative time fractions) of the relaying states, which can be $2^n$ in number. Using approximate capacity expressions derived from the quantize-map-forward scheme for physical layer cooperation, we show that for networks with $n\leq 6$ relays, the optimal schedule has atmost $n+1$ active states. This is an exponential improvement over the possible $2^n$ active states in a schedule. We also show that it is possible to achieve at least half the capacity of such networks (approximately) by employing simple routing strategies that use only two relays and two scheduling states. These results imply that the complexity of relaying in half-duplex diamond networks can be significantly reduced by using fewer scheduling states or fewer relays without adversely affecting throughput. Both these results assume centralized processing of the channel state information of all the relays. We take the first steps in analyzing the performance of relaying schemes where each relay switches between listening and transmitting states randomly and optimizes their relative fractions using only local channel state information. We show that even with such simple scheduling, we can achieve a significant fraction of the capacity of the network. Next, we look at the dual problem of selecting the subset of relays of a given size that has the highest capacity for a general layered full-duplex relay network. We formulate this as an optimization problem and derive efficient approximation algorithms to solve them. We end the thesis with the design and implementation of a practical relaying scheme called QUILT. In it the relay opportunistically decodes or quantizes its received signal and transmits the resulting sequence in cooperation with the source. To keep the complexity of the system low, we use LDPC codes at the source, interleaving at the relays and belief propagation decoding at the destination. We evaluate our system through testbed experiments over WiFi

Reliable and Secure Drone-assisted MillimeterWave Communications

The next generation of mobile networks and wireless communication, including the fifth-generation (5G) and beyond, will provide a high data rate as one of its fundamental requirements. Providing high data rates can be accomplished through communication over high-frequency bands such as the Millimeter-Wave(mmWave) one. However, mmWave communication experiences short-range communication, which impacts the overall network connectivity. Improving network connectivity can be accomplished through deploying Unmanned Ariel Vehicles(UAVs), commonly known as drones, which serve as aerial small-cell base stations. Moreover, drone deployment is of special interest in recovering network connectivity in the aftermath of disasters. Despite the potential advantages, drone-assisted networks can be more vulnerable to security attacks, given their limited capabilities. This security vulnerability is especially true in the aftermath of a disaster where security measures could be at their lowest. This thesis focuses on drone-assisted mmWave communication networks with their potential to provide reliable communication in terms of higher network connectivity measures, higher total network data rate, and lower end-to-end delay. Equally important, this thesis focuses on proposing and developing security measures needed for drone-assisted networks’ secure operation. More specifically, we aim to employ a swarm of drones to have more connection, reliability, and secure communication over the mmWave band. Finally, we target both the cellular 5Gnetwork and Ad hoc IEEE802.11ad/ay in typical network deployments as well as in post-disaster circumstances

Collaborative modulation multiple access for single hop and multihop networks

While the bandwidth available for wireless networks is limited, the world has seen an unprecedented growth in the number of mobile subscribers and an ever increasing demand for high data rates. Therefore efficient utilisation of bandwidth to maximise link spectral efficiency and number of users that can be served simultaneously are primary goals in the design of wireless systems. To achieve these goals, in this thesis, a new non-orthogonal uplink multiple access scheme which combines the functionalities of adaptive modulation and multiple access called collaborative modulation multiple access (CMMA) is proposed. CMMA enables multiple users to access the network simultaneously and share the same bandwidth even when only a single receive antenna is available and in the presence of high channel correlation. Instead of competing for resources, users in CMMA share resources collaboratively by employing unique modulation sets (UMS) that differ in phase, power, and/or mapping structure. These UMS are designed to insure that the received signal formed from the superposition of all users’ signals belongs to a composite QAM constellation (CC) with a rate equal to the sum rate of all users. The CC and its constituent UMSs are designed centrally at the BS to remove ambiguity, maximize the minimum Euclidian distance (dmin) of the CC and insure a minimum BER performance is maintained. Users collaboratively precode their transmitted signal by performing truncated channel inversion and phase rotation using channel state information (CSI ) obtained from a periodic common pilot to insure that their combined signal at the BS belongs to the CC known at the BS which in turn performs a simple joint maximum likelihood detection without the need for CSI. The coherent addition of users’ power enables CMMA to achieve high link spectral efficiency at any time without extra power or bandwidth but on the expense of graceful degradation in BER performance. To improve the BER performance of CMMA while preserving its precoding and detection structure and without the need for pilot-aided channel estimation, a new selective diversity combining scheme called SC-CMMA is proposed. SC-CMMA optimises the overall group performance providing fairness and diversity gain for various users with different transmit powers and channel conditions by selecting a single antenna out of a group of L available antennas that minimises the total transmit power required for precoding at any one time. A detailed study of capacity and BER performance of CMMA and SC-CMMA is carried out under different level of channel correlations which shows that both offer high capacity gain and resilience to channel correlation. SC-CMMA capacity even increase with high channel correlation between users’ channels. CMMA provides a practical solution for implementing the multiple access adder channel (MAAC) in fading environments hence a hybrid approach combining both collaborative coding and modulation referred to as H-CMMA is investigated. H-CMMA divides users into a number of subgroups where users within a subgroup are assigned the same modulation set and different multiple access codes. H-CMMA adjusts the dmin of the received CC by varying the number of subgroups which in turn varies the number of unique constellation points for the same number of users and average total power. Therefore H-CMMA can accommodate many users with different rates while flexibly managing the complexity, rate and BER performance depending on the SNR. Next a new scheme combining CMMA with opportunistic scheduling using only partial CSI at the receiver called CMMA-OS is proposed to combine both the power gain of CMMA and the multiuser diversity gain that arises from users’ channel independence. To avoid the complexity and excessive feedback associated with the dynamic update of the CC, the BS takes into account the independence of users’ channels in the design of the CC and its constituent UMSs but both remain unchanged thereafter. However UMS are no longer associated with users, instead channel gain’s probability density function is divided into regions with identical probability and each UMS is associated with a specific region. This will simplify scheduling as users can initially chose their UMS based on their CSI and the BS will only need to resolve any collision when the channels of two or more users are located at the same region. Finally a high rate cooperative communication scheme, called cooperative modulation (CM) is proposed for cooperative multiuser systems. CM combines the reliability of the cooperative diversity with the high spectral efficiency and multiple access capabilities of CMMA. CM maintains low feedback and high spectral efficiency by restricting relaying to a single route with the best overall channel. Two possible variations of CM are proposed depending on whether CSI available only at the users or just at the BS and the selected relay. The first is referred to Precode, Amplify, and Forward (PAF) while the second one is called Decode, Remap, and Forward (DMF). A new route selection algorithm for DMF based on maximising dmin of random CC is also proposed using a novel fast low-complexity multi-stage sphere based algorithm to calculate the dmin at the relay of random CC that is used for both relay selection and detection

In-band relays for next generation communication systems

Next generation mobile communication systems will operate at high system bandwidths of up to 100MHz and at carrier frequencies beyond 2GHz to provide peak data rates of up to 1Gbit/s with similar average revenues per user as todays cellular networks. High bit rates should be available to all users in a cell which is challenging due to the unfavorable propagation conditions in these bands. In-band relays are a seen as a promising technology for cellular networks to extend the high bit rate coverage and to enable cost efficient network deployments. The research in this thesis has contributed to the development of the relaying concept within the European research project WINNER. WINNER has designed a next generation radio system concept based on Orthogonal Frequency Division Multiple Access (OFDMA) with the inclusion of relays as one of the major innovations. In our work we have identified the radio resource management as the most important function to exploit the potential benefits of relay based deployments. We develop a flexible radio resource management framework that adapts to a wide range of deployments, whereas our main focus is on metropolitan area deployments. Here we propose to utilize a dynamic resource assignment based on soft frequency reuse. Further, we propose a practical way to integrate cooperative relaying in a relay network. This concept allows the cooperation of multiple radio access points within a relay enhanced cell with low overhead and small delays. In system simulations we compare the performance of relay deployments to base station only deployments in a metropolitan area network. Our results show that relay deployments are cost efficient and they increase both the network throughput as well as the high bit rate coverage of the network. Further, they show that our proposed soft frequency reuse scheme outperforms competing interference coordination schemes in the studied metropolitan area scenario. Even though the results have been obtained for WINNER system parameters, the conclusions can also be applied to OFDMA based systems such as 3GPP Long Term Evolution and WiMAX