Percolation scheduling with resource constraints

This paper presents a new approach to resource-constrained compiler extraction of fine-grain parallelism, targeted towards VLIW supercomputers, and in particular, the IBM VLIW (Very Large Instruction Word) processor. The algorithms described integrate resource limitations into Percolation Scheduling—a global parallelization technique—to deal with resource constraints, without sacrificing the generality and completeness of Percolation Scheduling in the process. This is in sharp contrast with previous approaches which either applied only to conditional-free code, or drastically limited the parallelization process by imposing relatively local heuristic resource constraints early in the scheduling process

Preparing HPC Applications for the Exascale Era: A Decoupling Strategy

Production-quality parallel applications are often a mixture of diverse operations, such as computation- and communication-intensive, regular and irregular, tightly coupled and loosely linked operations. In conventional construction of parallel applications, each process performs all the operations, which might result inefficient and seriously limit scalability, especially at large scale. We propose a decoupling strategy to improve the scalability of applications running on large-scale systems. Our strategy separates application operations onto groups of processes and enables a dataflow processing paradigm among the groups. This mechanism is effective in reducing the impact of load imbalance and increases the parallel efficiency by pipelining multiple operations. We provide a proof-of-concept implementation using MPI, the de-facto programming system on current supercomputers. We demonstrate the effectiveness of this strategy by decoupling the reduce, particle communication, halo exchange and I/O operations in a set of scientific and data-analytics applications. A performance evaluation on 8,192 processes of a Cray XC40 supercomputer shows that the proposed approach can achieve up to 4x performance improvement.Comment: The 46th International Conference on Parallel Processing (ICPP-2017

Percolation-based compiling for evaluation of parallelism and hardware design trade-offs

This thesis investigates parallelism and hardware design trade-offs of parallel and pipelined architectures. To explore these trade-offs we developed a retargetable compiler based on a set of powerful code transformations called Percolation Scheduling (PS) that map programs with real-time constraints and/or massive time requirements onto synchronous, parallel, high-performance or semi-custom architectures.High-performance is achieved through extraction of application inherent fine-grain parallelism and the use of a suitable architecture. Exploiting fine-grain parallelism is a critical part of exploiting all of the parallelism available in a given program, particularly since highly irregular forms of parallelism are often not visible at coarser levels and since the use of low-level parallelism has a multiplicative effect on the overall performance.To extract substantial parallelism from both the hardware and the compiler, we use a clean, highly parallel VLIW-like architecture that is synchronous, has multiple functional units and has a single program counter. The use of a hazard-free and homogeneous architecture does not result only in a better VLSI design but also considerably increases the compiler's ability to produce better code. To further enhance parallelism we modified the uni-cycle VLIW model and extended the transformations such that pipelined units that provide extra parallelism are used.Another approach presented is of resource constrained scheduling (RCS). Since the RCS problem is known to be NP-hard, in practice it may be solved only by a heuristic approach. We argue that using the heuristic after extraction of the unlimited-resources schedule may yield better results than if the heuristic has been applied at the beginning of the scheduling process.Through a series of benchmarks we evaluate hardware design trade-offs and show that speed-ups on average of one order of magnitude are feasible with sufficient functional units. However, when resources are limited we show that the number of functional units needed may be optimized for a particular suite of application programs

Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

FIFTY YEARS OF MICROPROCESSOR EVOLUTION: FROM SINGLE CPU TO MULTICORE AND MANYCORE SYSTEMS

Nowadays microprocessors are among the most complex electronic systems that man has ever designed. One small silicon chip can contain the complete processor, large memory and logic needed to connect it to the input-output devices. The performance of today's processors implemented on a single chip surpasses the performance of a room-sized supercomputer from just 50 years ago, which cost over $ 10 million [1]. Even the embedded processors found in everyday devices such as mobile phones are far more powerful than computer developers once imagined. The main components of a modern microprocessor are a number of general-purpose cores, a graphics processing unit, a shared cache, memory and input-output interface and a network on a chip to interconnect all these components [2]. The speed of the microprocessor is determined by its clock frequency and cannot exceed a certain limit. Namely, as the frequency increases, the power dissipation increases too, and consequently the amount of heating becomes critical. So, silicon manufacturers decided to design new processor architecture, called multicore processors [3]. With aim to increase performance and efficiency these multiple cores execute multiple instructions simultaneously. In this way, the amount of parallel computing or parallelism is increased [4]. In spite of mentioned advantages, numerous challenges must be addressed carefully when more cores and parallelism are used.This paper presents a review of microprocessor microarchitectures, discussing their generations over the past 50 years. Then, it describes the currently used implementations of the microarchitecture of modern microprocessors, pointing out the specifics of parallel computing in heterogeneous microprocessor systems. To use efficiently the possibility of multi-core technology, software applications must be multithreaded. The program execution must be distributed among the multi-core processors so they can operate simultaneously. To use multi-threading, it is imperative for programmer to understand the basic principles of parallel computing and parallel hardware. Finally, the paper provides details how to implement hardware parallelism in multicore systems

Programming Models\u27 Support for Heterogeneous Architecture

Accelerator-enhanced computing platforms have drawn a lot of attention due to their massive peak computational capacity. Heterogeneous systems equipped with accelerators such as GPUs have become the most prominent components of High Performance Computing (HPC) systems. Even at the node level the significant heterogeneity of CPU and GPU, i.e. hardware and memory space differences, leads to challenges for fully exploiting such complex architectures. Extending outside the node scope, only escalate such challenges. Conventional programming models such as data- ow and message passing have been widely adopted in HPC communities. When moving towards heterogeneous systems, the lack of GPU integration causes such programming models to struggle in handling the heterogeneity of different computing units, leading to sub-optimal performance and drastic decrease in developer productivity. To bridge the gap between underlying heterogeneous architectures and current programming paradigms, we propose to extend such programming paradigms with architecture awareness optimization. Two programming models are used to demonstrate the impact of heterogeneous architecture awareness. The PaRSEC task-based runtime, an adopter of the data- ow model, provides opportunities for overlapping communications with computations and minimizing data movements, as well as dynamically adapting the work granularity to the capability of the hardware. To fulfill the demand of an efficient and portable Message Passing Interface (MPI) implementation to communicate GPU data, a GPU-aware design is presented based on the Open MPI infrastructure supporting efficient point-to-point and collective communications of GPU-residential data, for both contiguous and non-contiguous memory layouts, by leveraging GPU network topology and hardware capabilities such as GPUDirect. The tight integration of GPU support in a widely used programming environment, free the developers from manually move data into/out of host memory before/after relying on MPI routines for communications, allowing them to focus instead on algorithmic optimizations. Experimental results have confirmed that supported by such a tight and transparent integration, conventional programming models can once again take advantage of the state-of-the-art hardware and exhibit performance at the levels expected by the underlying hardware capabilities

Performance analysis and optimization of in-situ integration of simulation with data analysis: zipping applications up

This paper targets an important class of applications that requires combining HPC simulations with data analysis for online or real-time scientific discovery. We use the state-of-the-art parallel-IO and data-staging libraries to build simulation-time data analysis workflows, and conduct performance analysis with real-world applications of computational fluid dynamics (CFD) simulations and molecular dynamics (MD) simulations. Driven by in-depth performance inefficiency analysis, we design an end-to-end application-level approach to eliminating the interlocks and synchronizations existent in the present methods. Our new approach employs both task parallelism and pipeline parallelism to reduce synchronizations effectively. In addition, we design a fully asynchronous, fine-grain, and pipelining runtime system, which is named Zipper. Zipper is a multi-threaded distributed runtime system and executes in a layer below the simulation and analysis applications. To further reduce the simulation application's stall time and enhance the data transfer performance, we design a concurrent data transfer optimization that uses both HPC network and parallel file system for improved bandwidth. The scalability of the Zipper system has been verified by a performance model and various empirical large scale experiments. The experimental results on an Intel multicore cluster as well as a Knight Landing HPC system demonstrate that the Zipper based approach can outperform the fastest state-of-the-art I/O transport library by up to 220% using 13,056 processor cores