1,978 research outputs found
Bayesian Optimization Using Domain Knowledge on the ATRIAS Biped
Controllers in robotics often consist of expert-designed heuristics, which
can be hard to tune in higher dimensions. It is typical to use simulation to
learn these parameters, but controllers learned in simulation often don't
transfer to hardware. This necessitates optimization directly on hardware.
However, collecting data on hardware can be expensive. This has led to a recent
interest in adapting data-efficient learning techniques to robotics. One
popular method is Bayesian Optimization (BO), a sample-efficient black-box
optimization scheme, but its performance typically degrades in higher
dimensions. We aim to overcome this problem by incorporating domain knowledge
to reduce dimensionality in a meaningful way, with a focus on bipedal
locomotion. In previous work, we proposed a transformation based on knowledge
of human walking that projected a 16-dimensional controller to a 1-dimensional
space. In simulation, this showed enhanced sample efficiency when optimizing
human-inspired neuromuscular walking controllers on a humanoid model. In this
paper, we present a generalized feature transform applicable to non-humanoid
robot morphologies and evaluate it on the ATRIAS bipedal robot -- in simulation
and on hardware. We present three different walking controllers; two are
evaluated on the real robot. Our results show that this feature transform
captures important aspects of walking and accelerates learning on hardware and
simulation, as compared to traditional BO.Comment: 8 pages, submitted to IEEE International Conference on Robotics and
Automation 201
Asymptotically Stable Walking of a Five-Link Underactuated 3D Bipedal Robot
This paper presents three feedback controllers that achieve an asymptotically
stable, periodic, and fast walking gait for a 3D (spatial) bipedal robot
consisting of a torso, two legs, and passive (unactuated) point feet. The
contact between the robot and the walking surface is assumed to inhibit yaw
rotation. The studied robot has 8 DOF in the single support phase and 6
actuators. The interest of studying robots with point feet is that the robot's
natural dynamics must be explicitly taken into account to achieve balance while
walking. We use an extension of the method of virtual constraints and hybrid
zero dynamics, in order to simultaneously compute a periodic orbit and an
autonomous feedback controller that realizes the orbit. This method allows the
computations to be carried out on a 2-DOF subsystem of the 8-DOF robot model.
The stability of the walking gait under closed-loop control is evaluated with
the linearization of the restricted Poincar\'e map of the hybrid zero dynamics.
Three strategies are explored. The first strategy consists of imposing a
stability condition during the search of a periodic gait by optimization. The
second strategy uses an event-based controller. In the third approach, the
effect of output selection is discussed and a pertinent choice of outputs is
proposed, leading to stabilization without the use of a supplemental
event-based controller
Biped robot walking control on inclined planes with fuzzy parameter adaptation
The bipedal structure is suitable for a robot functioning in the human environment, and assuming assistive roles. However, the bipedal walk is a poses a difficult control problem. Walking on even floor is not satisfactory for the applicability of a humanoid robot. This paper presents a study on bipedal walk on inclined planes. A Zero Moment Point (ZMP) based reference generation technique is employed. The orientation of the upper body is adjusted online by a fuzzy logic system to adapt to different walking surface slopes. This system uses a sampling time larger than the one of the joint space position controllers. A newly defined measure of the oscillatory behavior of the body pitch angle and the average value of the pelvis pitch angle are used as inputs to the fuzzy adaptation system. A 12-degrees-of-freedom (DOF) biped robot model is used in the full-dynamics 3-D simulations. Simulations are carried out on even floor and inclined planes with different slopes. The results indicate that the fuzzy adaptation algorithms presented are successful in enabling the robot to climb slopes of 5.6 degrees (10 percent)
Humanoid robot walking control on inclined planes
The humanoid bipedal structure is suitable for a assitive robot functioning in the human environment. However, the bipedal walk is a difficult control problem. Walking just on even floor is not satisfactory for the applicability of a humanoid robot. This paper presents a study on bipedal walk on inclined planes. A Zero Moment Point (ZMP) based reference generation technique is employed. The orientation of the feet is adjusted online by a fuzzy logic system to adapt to different walking surface slopes. This system uses a sampling time larger than the one of the joint space position controllers. The average value of the body pitch angle is used as the inputs to the fuzzy logic system. A foot pitch orientation compensator implemented independently for the two feet complements the fuzyy controller. A 12-degrees-of-freedom (DOF) biped robot model is used in the full-dynamics 3-D simulations. Simulations are carried out on even floor and inclined planes with different slopes. The results indicate that the control method presented is successful in enabling the robot to climb slopes of 8.5 degrees (15 percent grade)
An Energy Efficient Knee Locking Mechanism for a Dynamically Walking Robot
In this work, we present the design and the implementation of an innovative knee locking mechanism for a dynamically walking robot. The mechanism consists of a four-bar linkage that realizes a mechanical singularity for locking the knee when the leg is in the extended position. Once extended, the knee remains locked without energy consumption, while unlocking it only costs a small amount of energy. Tests showed that the robot walks robustly and that the energy consumption of the new system is low
Deep Kernels for Optimizing Locomotion Controllers
Sample efficiency is important when optimizing parameters of locomotion
controllers, since hardware experiments are time consuming and expensive.
Bayesian Optimization, a sample-efficient optimization framework, has recently
been widely applied to address this problem, but further improvements in sample
efficiency are needed for practical applicability to real-world robots and
high-dimensional controllers. To address this, prior work has proposed using
domain expertise for constructing custom distance metrics for locomotion. In
this work we show how to learn such a distance metric automatically. We use a
neural network to learn an informed distance metric from data obtained in
high-fidelity simulations. We conduct experiments on two different controllers
and robot architectures. First, we demonstrate improvement in sample efficiency
when optimizing a 5-dimensional controller on the ATRIAS robot hardware. We
then conduct simulation experiments to optimize a 16-dimensional controller for
a 7-link robot model and obtain significant improvements even when optimizing
in perturbed environments. This demonstrates that our approach is able to
enhance sample efficiency for two different controllers, hence is a fitting
candidate for further experiments on hardware in the future.Comment: (Rika Antonova and Akshara Rai contributed equally
- …