Stereo Visualisation of Historical Aerial Photos - a Valuable Digital Heritage Research Tool

We demonstrate with several examples how historical aerial photos can benefit from being viewed in stereo and how this can be useful as tool in digital heritage research. The main reason why stereo images are important is that they give a much better understanding of what is actually in the scene than single photos can. The important factor is the depth cue that helps understanding the content and adds the ability to distinguish between objects such as houses and trees and the ground as well as estimating heights of objects. There are however still challenges but also possibilities that will be discussed

Automatic 3DS Conversion of Historical Aerial Photographs

In this paper we present a method for the generation of 3D stereo (3DS) pairs from sequences of historical aerial photographs. The goal of our work is to provide a stereoscopic display when the existing exposures are in a monocular sequence. Each input image is processed using its neighbours and a synthetic image is rendered, which, together with the original one, form a stereo pair. Promising results on real images taken from a historical photo archive are shown, that corroborate the viability of generating 3DS data from monocular footage

Semi-automated geomorphological mapping applied to landslide hazard analysis

Computer-assisted three-dimensional (3D) mapping using stereo and multi-image (“softcopy”) photogrammetry is shown to enhance the visual interpretation of geomorphology in steep terrain with the direct benefit of greater locational accuracy than traditional manual mapping. This would benefit multi-parameter correlations between terrain attributes and landslide distribution in both direct and indirect forms of landslide hazard assessment. Case studies involve synthetic models of a landslide, and field studies of a rock slope and steep undeveloped hillsides with both recently formed and partly degraded, old landslide scars. Diagnostic 3D morphology was generated semi-automatically both using a terrain-following cursor under stereo-viewing and from high resolution digital elevation models created using area-based image correlation, further processed with curvature algorithms. Laboratory-based studies quantify limitations of area-based image correlation for measurement of 3D points on planar surfaces with varying camera orientations. The accuracy of point measurement is shown to be non-linear with limiting conditions created by both narrow and wide camera angles and moderate obliquity of the target plane. Analysis of the results with the planar surface highlighted problems with the controlling parameters of the area-based image correlation process when used for generating DEMs from images obtained with a low-cost digital camera. Although the specific cause of the phase-wrapped image artefacts identified was not found, the procedure would form a suitable method for testing image correlation software, as these artefacts may not be obvious in DEMs of non-planar surfaces.Modelling of synthetic landslides shows that Fast Fourier Transforms are an efficient method for removing noise, as produced by errors in measurement of individual DEM points, enabling diagnostic morphological terrain elements to be extracted. Component landforms within landslides are complex entities and conversion of the automatically-defined morphology into geomorphology was only achieved with manual interpretation; however, this interpretation was facilitated by softcopy-driven stereo viewing of the morphological entities across the hillsides.In the final case study of a large landslide within a man-made slope, landslide displacements were measured using a photogrammetric model consisting of 79 images captured with a helicopter-borne, hand-held, small format digital camera. Displacement vectors and a thematic geomorphological map were superimposed over an animated, 3D photo-textured model to aid non-stereo visualisation and communication of results

Digital photogrammetry for visualisation in architecture and archaeology

Bibliography: leaves 117-125.The task of recording our physical heritage is of significant importance: our past cannot be divorced from the present and it plays an integral part in the shaping of our future. This applies not only to structures that are hundreds of years old, but relatively more recent architectural structures also require adequate documentation if they are to be preserved for future generations. In recording such structures, the traditional 2D methods are proving inadequate. It will be beneficial to conservationists, archaeologists, researchers, historians and students alike if accurate and extensive digital 3D models of archaeological structures can be generated. This thesis investigates a method of creating such models, using digital photogrammetry. Three different types of model were generated: 1. the simple CAD (Computer Aided Design) model; 2. an amalgamation of 3D line drawings; and 3. an accurate surface model of the building using DSMs (Digital Surface Models) and orthophotos

Semi-automatic 3D reconstruction of urban areas using epipolar geometry and template matching

WOS:000240143800002 (Nº de Acesso Web of Science)In this work we describe a novel technique for semi-automatic three-dimensional (3D) reconstruction of urban areas, from airborne stereo-pair images whose output is VRML or DXF. The main challenge is to compute the relevant information—building's height and volume, roof's description, and texture—algorithmically, because it is very time consuming and thus expensive to produce it manually for large urban areas. The algorithm requires some initial calibration input and is able to compute the above-mentioned building characteristics from the stereo pair and the availability of the 2D CAD and the digital elevation model of the same area, with no knowledge of the camera pose or its intrinsic parameters. To achieve this, we have used epipolar geometry, homography computation, automatic feature extraction and we have solved the feature correspondence problem in the stereo pair, by using template matching

Trying to break new ground in aerial archaeology

Aerial reconnaissance continues to be a vital tool for landscape-oriented archaeological research. Although a variety of remote sensing platforms operate within the earth’s atmosphere, the majority of aerial archaeological information is still derived from oblique photographs collected during observer-directed reconnaissance flights, a prospection approach which has dominated archaeological aerial survey for the past century. The resulting highly biased imagery is generally catalogued in sub-optimal (spatial) databases, if at all, after which a small selection of images is orthorectified and interpreted. For decades, this has been the standard approach. Although many innovations, including digital cameras, inertial units, photogrammetry and computer vision algorithms, geographic(al) information systems and computing power have emerged, their potential has not yet been fully exploited in order to re-invent and highly optimise this crucial branch of landscape archaeology. The authors argue that a fundamental change is needed to transform the way aerial archaeologists approach data acquisition and image processing. By addressing the very core concepts of geographically biased aerial archaeological photographs and proposing new imaging technologies, data handling methods and processing procedures, this paper gives a personal opinion on how the methodological components of aerial archaeology, and specifically aerial archaeological photography, should evolve during the next decade if developing a more reliable record of our past is to be our central aim. In this paper, a possible practical solution is illustrated by outlining a turnkey aerial prospection system for total coverage survey together with a semi-automated back-end pipeline that takes care of photograph correction and image enhancement as well as the management and interpretative mapping of the resulting data products. In this way, the proposed system addresses one of many bias issues in archaeological research: the bias we impart to the visual record as a result of selective coverage. While the total coverage approach outlined here may not altogether eliminate survey bias, it can vastly increase the amount of useful information captured during a single reconnaissance flight while mitigating the discriminating effects of observer-based, on-the-fly target selection. Furthermore, the information contained in this paper should make it clear that with current technology it is feasible to do so. This can radically alter the basis for aerial prospection and move landscape archaeology forward, beyond the inherently biased patterns that are currently created by airborne archaeological prospection

Historical aerial photographs and digital photogrammetry for landslide assessment

This study demonstrates the value of historical aerial photographs as a source for monitoring long-term landslide evolution, which can be unlocked by using appropriate photogrammetric methods. The understanding of landslide mechanisms requires extensive data records; a literature review identified quantitative data on surface movements as a key element for their analysis. It is generally acknowledged that, owing to the flexibility and high degree of automation of modern digital photogrammetric techniques, it is possible to derive detailed quantitative data from aerial photographs. In spite of the relative ease of such techniques, there is only scarce research available on data quality that can be achieved using commonly available material, hence the motivation of this study. In two landslide case-studies (the Mam Tor and East Pentwyn landslides) the different types of products were explored, that can be derived from historical aerial photographs. These products comprised geomorphological maps, automatically derived elevation models (DEMs) and displacement vectors. They proved to be useful and sufficiently accurate for monitoring landslide evolution. Comparison with independent survey data showed good consistency, hence validating the techniques used. A wide range of imagery was used in terms of quality, media and format. Analysis of the combined datasets resulted in improvements to the stochastic model and establishment of a relationship between image ground resolution and data accuracy. Undetected systematic effects provided a limiting constraint to the accuracy of the derived data, but the datasets proved insufficient to quantify each factor individually. An important advancement in digital photogrammetry is image matching, which allows automation of various stages of the working chain. However, it appeared that the radiometric quality of historical images may not always assure good results, both for extracting DEMs and vectors using automatic methods. It can be concluded that the photographic archive can provide invaluable data for landslide studies, when modern photogrammetric techniques are being used. As ever, independent and appropriate checks should always be included in any photogrammetric design.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

CULTURAL HERITAGE RECONSTRUCTION FROM HISTORICAL PHOTOGRAPHS AND VIDEOS

Historical archives save invaluable treasures and play a critical role in the conservation of Cultural Heritage. Old photographs and videos, which have survived over time and stored in these archives, preserve traces of architecture and urban transformation and, in many cases, are the only evidence of buildings that no longer exist. They are a precious source of enormous informative potential in Cultural Heritage documentation and save invaluable treasures. Thanks to photogrammetric techniques it is possible to extract metric information from these sources useful for 3D virtual reconstructions of monuments and historic buildings. This paper explores the ways to search for, classify and group historical data by considering their possible use in metric documentation and aims to provide an overview of criticality and open issues of the methodologies that could be used to process these data. A practical example is described and presented as a case study. The video "Torino 1928", an old movie dating from the 1930s, was processed for reconstructing the temporary pavilions of the "Exposition" held in Turin in 1928. Despite the initial concerns relating to processing this kind of data, the experimental methodology used in this research has allowed to reach a quality of results of acceptable standard

Human History and Digital Future

Korrigierter Nachdruck. Im Kapitel "Wallace/Moullou: Viability of Production and Implementation of Retrospective Photogrammetry in Archaeology" wurden die Acknowledgemens enfternt.The Proceedings of the 46th Annual Conference on Computer Applications and Quantitative Methods in Archaeology, held between March 19th and 23th, 2018 at the University of Tübingen, Germany, discuss the current questions concerning digital recording, computer analysis, graphic and 3D visualization, data management and communication in the field of archaeology. Through a selection of diverse case studies from all over the world, the proceedings give an overview on new technical approaches and best practice from various archaeological and computer-science disciplines