Improving the reliability of optimised link state routing in a smart grid neighbour area network based wireless mesh network using multiple metrics

© 2017 by the authors; licensee MDPI. Reliable communication is the backbone of advanced metering infrastructure (AMI). Within the AMI, the neighbourhood area network (NAN) transports a multitude of traffic, each with unique requirements. In order to deliver an acceptable level of reliability and latency, the underlying network, such as the wireless mesh network (WMN), must provide or guarantee the quality-of-service (QoS) level required by the respective application traffic. Existing WMN routing protocols, such as optimised link state routing (OLSR), typically utilise a single metric and do not consider the requirements of individual traffic; hence, packets are delivered on a best-effort basis. This paper presents a QoS-aware WMN routing technique that employs multiple metrics in OLSR optimal path selection for AMI applications. The problems arising from this approach are non deterministic polynomial time (NP)-complete in nature, which were solved through the combined use of the analytical hierarchy process (AHP) algorithm and pruning techniques. For smart meters transmitting Internet Protocol (IP) packets of varying sizes at different intervals, the proposed technique considers the constraints of NAN and the applications' traffic characteristics. The technique was developed by combining multiple OLSR path selection metrics with the AHP algorithm in ns-2. Compared with the conventional link metric in OLSR, the results show improvements of about 23% and 45% in latency and Packet Delivery Ratio (PDR), respectively, in a 25-node grid NAN

Multiple metrics-OLSR in NAN for Advanced Metering Infrastructures

Routing in Neighbourhood Area Network (NAN) for Smart Grid's Advanced Metering Infrastructure (AMI) raises the need for Quality of Service (QoS)-Aware routing. This is due to the expanded list of applications that will result in the transmission of different types of traffic between NAN devices (i.e smart meters). In wireless mesh network (WMN) routing, a combination of multiple link metrics, though complex, has been identified as a possible solution for QoS routing. These complexities (i.e Np complete problem) can be resolved through the use of Analytical Hierarchy Process (AHP) algorithm and pruning techniques. With the assumption that smart meters transmit IP packets of different sizes at different interval to represent AMI traffic, a case study of the performance of three Optimised Link State Routing (OLSR) link metrics is carried out on a grid topology NAN based WMN in ns-2 network simulator. The best two performing metric were used to show the possibility of combining multiple metrics with OLSR through the AHP algorithm to fulfill the QoS routing requirements of targeted AMI application traffic in NANs

Evaluation of RPL’s Single Metric Objective Functions

In this paper, we evaluate the performance of RPL (IPv6 Routing Protocol for Low Power and Lossy Networks) based on the Objective Function being used to construct the Destination Oriented Directed Acyclic Graph (DODAG). Using the Cooja simulator, we compared Objective Function Zero (OF0) with the Minimum Rank with Hysteresis Objective Function (MRHOF) in terms of average power consumption, packet loss ratio, and average end-to-end latency. Our study shows that RPL performs better in terms of packet loss ratio and average endto-end latency when MRHOF is used as an objective function. However, the average power consumption is noticeably higher compared to OF0

Multimedia delivery in the future internet

The term “Networked Media” implies that all kinds of media including text, image, 3D graphics, audio and video are produced, distributed, shared, managed and consumed on-line through various networks, like the Internet, Fiber, WiFi, WiMAX, GPRS, 3G and so on, in a convergent manner [1]. This white paper is the contribution of the Media Delivery Platform (MDP) cluster and aims to cover the Networked challenges of the Networked Media in the transition to the Future of the Internet. Internet has evolved and changed the way we work and live. End users of the Internet have been confronted with a bewildering range of media, services and applications and of technological innovations concerning media formats, wireless networks, terminal types and capabilities. And there is little evidence that the pace of this innovation is slowing. Today, over one billion of users access the Internet on regular basis, more than 100 million users have downloaded at least one (multi)media file and over 47 millions of them do so regularly, searching in more than 160 Exabytes1 of content. In the near future these numbers are expected to exponentially rise. It is expected that the Internet content will be increased by at least a factor of 6, rising to more than 990 Exabytes before 2012, fuelled mainly by the users themselves. Moreover, it is envisaged that in a near- to mid-term future, the Internet will provide the means to share and distribute (new) multimedia content and services with superior quality and striking flexibility, in a trusted and personalized way, improving citizens’ quality of life, working conditions, edutainment and safety. In this evolving environment, new transport protocols, new multimedia encoding schemes, cross-layer inthe network adaptation, machine-to-machine communication (including RFIDs), rich 3D content as well as community networks and the use of peer-to-peer (P2P) overlays are expected to generate new models of interaction and cooperation, and be able to support enhanced perceived quality-of-experience (PQoE) and innovative applications “on the move”, like virtual collaboration environments, personalised services/ media, virtual sport groups, on-line gaming, edutainment. In this context, the interaction with content combined with interactive/multimedia search capabilities across distributed repositories, opportunistic P2P networks and the dynamic adaptation to the characteristics of diverse mobile terminals are expected to contribute towards such a vision. Based on work that has taken place in a number of EC co-funded projects, in Framework Program 6 (FP6) and Framework Program 7 (FP7), a group of experts and technology visionaries have voluntarily contributed in this white paper aiming to describe the status, the state-of-the art, the challenges and the way ahead in the area of Content Aware media delivery platforms

Improving Multicast Communications Over Wireless Mesh Networks

In wireless mesh networks (WMNs) the traditional approach to shortest path tree based multicasting is to cater for the needs of the poorest performingnode i.e. the maximum permitted multicast line rate is limited to the lowest line rate used by the individual Child nodes on a branch. In general, this meansfixing the line rate to its minimum value and fixing the transmit power to its maximum permitted value. This simplistic approach of applying a single multicast rate for all nodes in the multicast group results in a sub-optimal trade-off between the mean network throughput and coverage area that does not allow for high bandwidth multimedia applications to be supported. By relaxing this constraint and allowing multiple line rates to be used, the mean network throughput can be improved. This thesis presents two methods that aim to increase the mean network throughput through the use of multiple line rates by the forwarding nodes. This is achieved by identifying the Child nodes responsible for reducing the multicast group rate. The first method identifies specific locations for the placement of relay nodes which allows for higher multicast branch line rates to be used. The second method uses a power control algorithm to tune the transmit power to allow for higher multicast branch line rates. The use of power control also helps to reduce the interference caused to neighbouring nodes.Through extensive computer simulation it can be shown that these two methods can lead to a four-fold gain in the mean network throughput undertypical WMN operating conditions compared with the single line rate case

Routing for Flying Networks using Software-Defined Networking

Nos últimos anos, os Veículos Aéreos Não Tripulados (UAVs) estão a ser usados de forma crescente em inúmeras aplicações, tanto militares como civis. A sua miniaturização e o preço reduzido abriram o caminho para o uso de enxames de UAVs, que permitem melhores resultados na realização de tarefas em relação a UAVs independentes. Contudo, para permitir a cooperação entre UAVs, devem ser asseguradas comunicações contínuas e fiáveis.Além disso, os enxames de UAVs foram identificados pela comunidade científica como meio para permitir o acesso à Internet a utilizadores terrestres em cenários como prestação de socorros e Eventos Temporários Lotados (TCEs), tirando partido da sua capacidade para transportar Pontos de Acesso (APs) Wi-Fi e células Long-Term Evolution (LTE). Soluções que dependem de uma Estação de Controlo (CS) capaz de posicionar os UAVs de acordo com as necessidades de tráfego dos utilizadores demonstraram aumentar a Qualidade de Serviço (QoS) oferecida pela rede. No entanto, estas soluções introduzem desafios importantes no que diz respeito ao encaminhamento do tráfego.Recentemente, foi proposta uma solução que tira partido do conhecimento da CS sobre o estado futuro da rede para atualizar dinamicamente as tabelas de encaminhamento de modo a que as ligações na rede voadora não sejam interrompidas, em vez de se recuperar da sua interrupção, como é o caso na maioria dos protocolos de encaminhamento existentes. Apesar de não considerar o impacto das reconfigurações na rede de acesso, como consequência da mobilidade dos APs, ou o balanceamento da carga na rede, esta abordagem é promissora e merece ser desenvolvida e implementada num sistema real.Esta dissertação tem como foco a implementação de um protocolo de encaminhamento para redes voadoras baseado em Software-Defined Networking (SDN). Especificamente, aborda os problemas de mobilidade e de balanceamento da carga na rede de uma perspetiva centralizada, garantindo simultaneamente comunicações ininterruptas e de banda-larga entre utilizadores terrestres e a Internet, permitindo assim que os UAVs se possam reposicionar e reconfigurar sem interferir com as ligações dos terminais à rede.In recent years, Unmanned Aerial Vehicles (UAVs) are being increasingly used in various applications, both military and civilian. Their miniaturisation and low cost paved the way to the usage of swarms of UAVs, which provide better results when performing tasks compared to single UAVs. However, to enable cooperation between the UAVs, always-on and reliable communications must be ensured.Moreover, swarms of UAVs are being targeted by the scientific community as a way to provide Internet access to ground users in scenarios such as disaster reliefs and Temporary Crowded Events (TCEs), taking advantage of the capability of UAVs to carry Wi-Fi Access Points (APs) or Long-Term Evolution (LTE) cells. Solutions relying on a Control Station (CS) capable of positioning the UAVs according to the users' traffic demands have been shown to improve the Quality of Service (QoS) provided by the network. However, they introduce important challenges regarding network routing.Recently, a solution was proposed to take advantage of the knowledge provided by a CS regarding how the network will change, by dynamically updating the forwarding tables before links in the flying network are disrupted, rather than recovering from link failure, as is the case in most of the existing routing protocols. Although it does not consider the impact of reconfigurations on the access network due to the mobility of the APs, it is a promising approach worthy of being improved and implemented in a real system.This dissertation focuses on implementing a routing solution for flying networks based on Software-Defined Networking (SDN). Specifically, it addresses the mobility management and network load balancing issues from a centralised perspective, while simultaneously enabling uninterruptible and broadband communications between ground users and the Internet, thus allowing UAVs to reposition and reconfigure themselves without interfering with the terminals' connections to the network

Intelligent MANET optimisation system

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.In the literature, various Mobile Ad hoc NETwork (MANET) routing protocols proposed. Each performs the best under specific context conditions, for example under high mobility or less volatile topologies. In existing MANET, the degradation in the routing protocol performance is always associated with changes in the network context. To date, no MANET routing protocol is able to produce optimal performance under all possible conditions. The core aim of this thesis is to solve the routing problem in mobile Ad hoc networks by introducing an optimum system that is in charge of the selection of the running routing protocol at all times, the system proposed in this thesis aims to address the degradation mentioned above. This optimisation system is a novel approach that can cope with the network performance’s degradation problem by switching to other routing protocol. The optimisation system proposed for MANET in this thesis adaptively selects the best routing protocol using an Artificial Intelligence mechanism according to the network context. In this thesis, MANET modelling helps in understanding the network performance through different contexts, as well as the models’ support to the optimisation system. Therefore, one of the main contributions of this thesis is the utilisation and comparison of various modelling techniques to create representative MANET performance models. Moreover, the proposed system uses an optimisation method to select the optimal communication routing protocol for the network context. Therefore, to build the proposed system, different optimisation techniques were utilised and compared to identify the best optimisation technique for the MANET intelligent system, which is also an important contribution of this thesis. The parameters selected to describe the network context were the network size and average mobility. The proposed system then functions by varying the routing mechanism with the time to keep the network performance at the best level. The selected protocol has been shown to produce a combination of: higher throughput, lower delay, fewer retransmission attempts, less data drop, and lower load, and was thus chosen on this basis. Validation test results indicate that the identified protocol can achieve both a better network performance quality than other routing protocols and a minimum cost function of 4.4%. The Ad hoc On Demand Distance Vector (AODV) protocol comes in second with a cost minimisation function of 27.5%, and the Optimised Link State Routing (OLSR) algorithm comes in third with a cost minimisation function of 29.8%. Finally, The Dynamic Source Routing (DSR) algorithm comes in last with a cost minimisation function of 38.3%