3,859 research outputs found
Smart vest for respiratory rate monitoring of COPD patients based on non-contact capacitive sensing
In this paper, a first approach to the design of a portable device for non-contact monitoring
of respiratory rate by capacitive sensing is presented. The sensing system is integrated into a smart
vest for an untethered, low-cost and comfortable breathing monitoring of Chronic Obstructive
Pulmonary Disease (COPD) patients during the rest period between respiratory rehabilitation
exercises at home. To provide an extensible solution to the remote monitoring using this sensor and
other devices, the design and preliminary development of an e-Health platform based on the Internet
of Medical Things (IoMT) paradigm is also presented. In order to validate the proposed solution,
two quasi-experimental studies have been developed, comparing the estimations with respect to the
golden standard. In a first study with healthy subjects, the mean value of the respiratory rate error,
the standard deviation of the error and the correlation coefficient were 0.01 breaths per minute (bpm),
0.97 bpm and 0.995 (p < 0.00001), respectively. In a second study with COPD patients, the values
were -0.14 bpm, 0.28 bpm and 0.9988 (p < 0.0000001), respectively. The results for the rest period
show the technical and functional feasibility of the prototype and serve as a preliminary validation of
the device for respiratory rate monitoring of patients with COPD.Ministerio de Ciencia e Innovación PI15/00306Ministerio de Ciencia e Innovación DTS15/00195Junta de Andalucía PI-0010-2013Junta de Andalucía PI-0041-2014Junta de Andalucía PIN-0394-201
Communication system for a tooth-mounted RF sensor used for continuous monitoring of nutrient intake
In this Thesis, the communication system of a wearable device that monitors the user’s diet is studied. Based in a novel RF metamaterial-based mouth sensor, different decisions have to be made concerning the system’s technologies, such as the power source options for the device, the wireless technology used for communications and the method to obtain data from the sensor. These issues, along with other safety rules and regulations, are reviewed, as the first stage of development of the Food-Intake Monitoring projectOutgoin
The development of a wireless LCP-based intracranial pressure sensor for traumatic brain injury patients
Raised intracranial pressure (ICP) in traumatic brain injury (TBI) patients can lead to death. ICP measurement is required to monitor the condition of a patient and to inform TBI treatment. This work presents a new wireless liquid crystal polymer (LCP) based ICP sensor. The sensor is designed with the purpose of measuring ICP and wirelessly transmitting the signal to an external monitoring unit. The sensor is minimally invasive and biocompatible due to the mechanical design and the use of LCP. A prototype sensor and associated wireless module are fabricated and tested to demonstrate the functionality and performance of the wireless LCP-based ICP sensor. Experimental results show that the wireless LCP-based ICP sensor can operate in the pressure range of 0 - 60.12 mmHg. Based on repeated measurements, the sensitivity of the sensor is found to be 25.62 µVmmHg-1, with a standard deviation of ± 1.16 µVmmHg-1. This work represents a significant step towards achieving a wireless, implantable, minimally invasive ICP monitoring strategy for TBI patients
Hardware Architectures for Low-power In-Situ Monitoring of Wireless Embedded Systems
As wireless embedded systems transition from lab-scale research prototypes to large-scale commercial deployments, providing reliable and dependable system operation becomes absolutely crucial to ensure successful adoption. However, the untethered nature of wireless embedded systems severely limits the ability to access, debug, and control device operation after deployment—post-deployment or in-situ visibility. It is intuitive that the more information we have about a system’s operation after deployment, the better/faster we can respond upon the detection of anomalous behavior. Therefore, post-deployment visibility is a foundation upon which other runtime reliability techniques can be built. However, visibility into system operation diminishes significantly once the devices are remotely deployed, and we refer to this problem as a lack of post-deployment visibility
Real-time sweat pH monitoring based on a wearable chemical barcode micro-fluidic platform incorporating ionic liquids
This work presents the fabrication, characterisation and the performance of a wearable, robust, flexible
and disposable chemical barcode device based on a micro-fluidic platform that incorporates ionic
liquid polymer gels (ionogels). The device has been applied to the monitoring of the pH of sweat in
real time during an exercise period. The device is an ideal wearable sensor for measuring the pH of
sweat since it does not contents any electronic part for fluidic handle or pH detection and because it can
be directly incorporated into clothing, head- or wristbands, which are in continuous contact with the
skin. In addition, due to the micro-fluidic structure, fresh sweat is continuously passing through the sensing area providing the capability to perform continuous real time analysis. The approach presented here ensures immediate feedback regarding sweat composition. Sweat analysis is attractive for monitoring purposes as it can provide physiological information directly relevant to the health and performance of the wearer without the need for an invasive sampling approac
Enabling Self-Powered Autonomous Wireless Sensors with New-Generation I2C-RFID Chips
A self-powered autonomous RFID device with sensing and computing capabilities
is presented in this paper. Powered by an RF energy-harvesting circuit enhanced
by a DC-DC voltage booster in silicon-on-insulator (SOI) technology, the device
relies on a microcontroller and a new generation I2C-RFID chip to wirelessly
deliver sensor data to standard RFID EPC Class-1 Generation-2 (Gen2) readers.
When the RF power received from the interrogating reader is -14 dBm or higher,
the device, fabricated on an FR4 substrate using low-cost discrete components,
is able to produce 2.4-V DC voltage to power its circuitry. The experimental
results demonstrate the effectiveness of the device to perform reliable sensor
data transmissions up to 5 meters in fully-passive mode. To the best of our
knowledge, this represents the longest read range ever reported for passive UHF
RFID sensors compliant with the EPC Gen2 standard
A Wireless LC Sensor Coated with Ba0.9Bi0.066TiO3 for Measuring Temperature
This paper presents a passive LC wireless sensor for measuring temperature. The sensor is designed as a parallel connection of a spiral inductor and an interdigitated capacitor and it was fabricated in a conductive layer using LTCC (Low Temperature Co-fired Ceramic) technology. The inderdigitated capacitor electrodes were coated with a thin film of bismuth doped barium titanate (Ba0.9Bi0.066TiO3), whose permittivity changes with temperature, which directly induces changes in the capacitance of the interdigitated capacitor and consequently changes the resonant frequency of the sensor. The measurements of S-parameter of the sensor were performed using a Vector Network Analyzer (E5071B, Agilent Technologies, Santa Clara, CA, USA), whose port was connected to the antenna coil that was placed around the sensor in order to be able to wirelessly detect temperature, in the temperature range from 25 degrees C to 165 degrees C
- …