On the standardisation of Web service management operations

Given the current interest in TCP/IP network management research towards Web services, it is important to recognise how standardisation can be achieved. This paper mainly focuses on the standardisation of operations and not management information. We state that standardisation should be done by standardising the abstract parts of a WSDL document, i.e. the interfaces and the messages. Operations can vary in granularity and parameter transparency, creating four extreme operation signatures, all of which have advantages and disadvantages

Tietoverkkojen valvonnan yhdenmukaistaminen

As the modern society is increasingly dependant on computer networks especially as the Internet of Things gaining popularity, a need to monitor computer networks along with associated devices increases. Additionally, the amount of cyber attacks is increasing and certain malware such as Mirai target especially network devices. In order to effectively monitor computer networks and devices, effective solutions are required for collecting and storing the information. This thesis designs and implements a novel network monitoring system. The presented system is capable of utilizing state-of-the-art network monitoring protocols and harmonizing the collected information using a common data model. This design allows effective queries and further processing on the collected information. The presented system is evaluated by comparing the system against the requirements imposed on the system, by assessing the amount of harmonized information using several protocols and by assessing the suitability of the chosen data model. Additionally, the protocol overheads of the used network monitoring protocols are evaluated. The presented system was found to fulfil the imposed requirements. Approximately 21% of the information provided by the chosen network monitoring protocols could be harmonized into the chosen data model format. The result is sufficient for effective querying and combining the information, as well as for processing the information further. The result can be improved by extending the data model and improving the information processing. Additionally, the chosen data model was shown to be suitable for the use case presented in this thesis.Yhteiskunnan ollessa jatkuvasti verkottuneempi erityisesti Esineiden Internetin kasvattaessa suosiotaan, tarve seurata sekä verkon että siihen liitettyjen laitteiden tilaa ja mahdollisia poikkeustilanteita kasvaa. Lisäksi tietoverkkohyökkäysten määrä on kasvamassa ja erinäiset haittaohjelmat kuten Mirai, ovat suunnattu erityisesti verkkolaitteita kohtaan. Jotta verkkoa ja sen laitteiden tilaa voidaan seurata, tarvitaan tehokkaita ratkaisuja tiedon keräämiseen sekä säilöntään. Tässä diplomityössä suunnitellaan ja toteutetaan verkonvalvontajärjestelmä, joka mahdollistaa moninaisten verkonvalvontaprotokollien hyödyntämisen tiedonkeräykseen. Lisäksi järjestelmä säilöö kerätyn tiedon käyttäen yhtenäistä tietomallia. Yhtenäisen tietomallin käyttö mahdollistaa tiedon tehokkaan jatkojalostamisen sekä haut tietosisältöihin. Diplomityössä esiteltävän järjestelmän ominaisuuksia arvioidaan tarkastelemalla, minkälaisia osuuksia eri verkonvalvontaprotokollien tarjoamasta informaatiosta voidaan yhdenmukaistaa tietomalliin, onko valittu tietomalli soveltuva verkonvalvontaan sekä varmistetaan esiteltävän järjestelmän täyttävän sille asetetut vaatimukset. Lisäksi työssä arvioidaan käytettävien verkonvalvontaprotokollien siirtämisen kiinteitä kustannuksia kuten otsakkeita. Työssä esitellyn järjestelmän todettiin täyttävän sille asetetut vaatimukset. Eri verkonvalvontaprotokollien tarjoamasta informaatiosta keskimäärin 21% voitiin harmonisoida tietomalliin. Saavutettu osuus on riittävä, jotta eri laitteista saatavaa informaatiota voidaan yhdistellä ja hakea tehokkaasti. Lukemaa voidaan jatkossa parantaa laajentamalla tietomallia sekä kehittämällä kerätyn informaation prosessointia. Lisäksi valittu tietomalli todettiin soveltuvaksi tämän diplomityön käyttötarkoitukseen

An ontology-driven architecture for data integration and management in home-based telemonitoring scenarios

The shift from traditional medical care to the use of new technology and engineering innovations is nowadays an interesting and growing research area mainly motivated by a growing population with chronic conditions and disabilities. By means of information and communications technologies (ICTs), telemedicine systems offer a good solution for providing medical care at a distance to any person in any place at any time. Although significant contributions have been made in this field in recent decades, telemedicine and in e-health scenarios in general still pose numerous challenges that need to be addressed by researchers in order to take maximum advantage of the benefits that these systems provide and to support their long-term implementation. The goal of this research thesis is to make contributions in the field of home-based telemonitoring scenarios. By periodically collecting patients' clinical data and transferring them to physicians located in remote sites, patient health status supervision and feedback provision is possible. This type of telemedicine system guarantees patient supervision while reducing costs (enabling more autonomous patient care and avoiding hospital over flows). Furthermore, patients' quality of life and empowerment are improved. Specifically, this research investigates how a new architecture based on ontologies can be successfully used to address the main challenges presented in home-based telemonitoring scenarios. The challenges include data integration, personalized care, multi-chronic conditions, clinical and technical management. These are the principal issues presented and discussed in this thesis. The proposed new ontology-based architecture takes into account both practical and conceptual integration issues and the transference of data between the end points of the telemonitoring scenario (i.e, communication and message exchange). The architecture includes two layers: 1) a conceptual layer and 2) a data and communication layer. On the one hand, the conceptual layer based on ontologies is proposed to unify the management procedure and integrate incoming data from all the sources involved in the telemonitoring process. On the other hand, the data and communication layer based on web service technologies is proposed to provide practical back-up to the use of the ontology, to provide a real implementation of the tasks it describes and thus to provide a means of exchanging data. This architecture takes advantage of the combination of ontologies, rules, web services and the autonomic computing paradigm. All are well-known technologies and popular solutions applied in the semantic web domain and network management field. A review of these technologies and related works that have made use of them is presented in this thesis in order to understand how they can be combined successfully to provide a solution for telemonitoring scenarios. The design and development of the ontology used in the conceptual layer led to the study of the autonomic computing paradigm and its combination with ontologies. In addition, the OWL (Ontology Web Language) language was studied and selected to express the required knowledge in the ontology while the SPARQL language was examined for its effective use in defining rules. As an outcome of these research tasks, the HOTMES (Home Ontology for Integrated Management in Telemonitoring Scenarios) ontology, presented in this thesis, was developed. The combination of the HOTMES ontology with SPARQL rules to provide a flexible solution for personalising management tasks and adapting the methodology for different management purposes is also discussed. The use of Web Services (WSs) was investigated to support the exchange of information defined in the conceptual layer of the architecture. A generic ontology based solution was designed to integrate data and management procedures in the data and communication layer of the architecture. This is an innovative REST-inspired architecture that allows information contained in an ontology to be exchanged in a generic manner. This layer structure and its communication method provide the approach with scalability and re-usability features. The application of the HOTMES-based architecture has been studied for clinical purposes following three simple methodological stages described in this thesis. Data and management integration for context-aware and personalized monitoring services for patients with chronic conditions in the telemonitoring scenario are thus addressed. In particular, the extension of the HOTMES ontology defines a patient profile. These profiles in combination with individual rules provide clinical guidelines aiming to monitor and evaluate the evolution of the patient's health status evolution. This research implied a multi-disciplinary collaboration where clinicians had an essential role both in the ontology definition and in the validation of the proposed approach. Patient profiles were defined for 16 types of different diseases. Finally, two solutions were explored and compared in this thesis to address the remote technical management of all devices that comprise the telemonitoring scenario. The first solution was based on the HOTMES ontology-based architecture. The second solution was based on the most popular TCP/IP management architecture, SNMP (Simple Network Management Protocol). As a general conclusion, it has been demonstrated that the combination of ontologies, rules, WSs and the autonomic computing paradigm takes advantage of the main benefits that these technologies can offer in terms of knowledge representation, work flow organization, data transference, personalization of services and self-management capabilities. It has been proven that ontologies can be successfully used to provide clear descriptions of managed data (both clinical and technical) and ways of managing such information. This represents a further step towards the possibility of establishing more effective home-based telemonitoring systems and thus improving the remote care of patients with chronic diseases

A Generic Network and System Management Framework

Networks and distributed systems have formed the basis of an ongoing communications revolution that has led to the genesis of a wide variety of services. The constantly increasing size and complexity of these systems does not come without problems. In some organisations, the deployment of Information Technology has reached a state where the benefits from downsizing and rightsizing by adding new services are undermined by the effort required to keep the system running. Management of networks and distributed systems in general has a straightforward goal: to provide a productive environment in which work can be performed effectively. The work required for management should be a small fraction of the total effort. Most IT systems are still managed in an ad hoc style without any carefully elaborated plan. In such an environment the success of management decisions depends totally on the qualification and knowledge of the administrator. The thesis provides an analysis of the state of the art in the area of Network and System Management and identifies the key requirements that must be addressed for the provisioning of Integrated Management Services. These include the integration of the different management related aspects (i.e. integration of heterogeneous Network, System and Service Management). The thesis then proposes a new framework, INSMware, for the provision of Management Services. It provides a fundamental basis for the realisation of a new approach to Network and System Management. It is argued that Management Systems can be derived from a set of pre-fabricated and reusable Building Blocks that break up the required functionality into a number of separate entities rather than being developed from scratch. It proposes a high-level logical model in order to accommodate the range of requirements and environments applicable to Integrated Network and System Management that can be used as a reference model. A development methodology is introduced that reflects principles of the proposed approach, and provides guidelines to structure the analysis, design and implementation phases of a management system. The INSMware approach can further be combined with the componentware paradigm for the implementation of the management system. Based on these principles, a prototype for the management of SNMP systems has been implemented using industry standard middleware technologies. It is argued that development of a management system based on Componentware principles can offer a number of benefits. INSMware Components may be re-used and system solutions will become more modular and thereby easier to construct and maintain

Teleprotection signalling over an IP/MPLS network

Protection of electricity networks have developed to incorporate communications, referred to as protection signalling. Due to the evolution of the electricity supply system, there are many developments pending within the scope of protection signalling and protection engineering in general. This project investigates the use of current and emerging communications technologies (i.e. packetised networks) being applied and incorporated into current protection signalling schemes and technologies. The purpose of the project is to provide a more cost-effective solution to protection schemes running obsolescent hardware. While the medium-term goal of the industry is to move entirely to IEC 61850 communications, legacy teleprotection relays using non-IP communications will still exist for many years to come. For companies to be ready for an IEC 61850 rollout a fully deployed IP/MPLS network will be necessary and it can be seen that various companies worldwide are readying themselves in this way. However, in the short-term for these companies, this means maintaining their existing TDM network (which runs current teleprotection schemes) and IP/MPLS network. This is a costly business outcome that can be minimised with the migration of services from and decommissioning of TDM networks. Network channel testing was the primary testing focus of the project. The testing proved that teleprotection traffic with correct QoS markings assured the system met latency and stability requirements. Furthermore, MPLS resiliency features (secondary LSPs & Fast-reroute) were tested and proved automatic path failover was possible under fault conditions at sub-30ms speeds

Major: Electronics and Communication Engineering

Today, information technology is strategically important to the goals and aspirations of the business enterprises, government and high-level education institutions – university. Universities are facing new challenges with the emerging global economy characterized by the importance of providing faster communication services and improving the productivity and effectiveness of individuals. New challenges such as provides an information network that supports the demands and diversification of university issues. A new network architecture, which is a set of design principles for build a network, is one of the pillar bases. It is the cornerstone that enables the university’s faculty, researchers, students, administrators, and staff to discover, learn, reach out, and serve society. This thesis focuses on the network architecture definitions and fundamental components. Three most important characteristics of high-quality architecture are that: it’s open network architecture; it’s service-oriented characteristics and is an IP network based on packets. There are four important components in the architecture, which are: Services and Network Management, Network Control, Core Switching and Edge Access. The theoretical contribution of this study is a reference model Architecture of University Campus Network that can be followed or adapted to build a robust yet flexible network that respond next generation requirements. The results found are relevant to provide an important complete reference guide to the process of building campus network which nowadays play a very important role. Respectively, the research gives university networks a structured modular model that is reliable, robust and can easily grow

Managing Next Generation Networks (NGNs) based on the Service-Oriented Architechture (SOA). Design, Development and testing of a message-based Network Management platform for the integration of heterogeneous management systems.

Next Generation Networks (NGNs) aim to provide a unified network infrastructure to offer multimedia data and telecommunication services through IP convergence. NGNs utilize multiple broadband, QoS-enabled transport technologies, creating a converged packet-switched network infrastructure, where service-related functions are separated from the transport functions. This requires significant changes in the way how networks are managed to handle the complexity and heterogeneity of NGNs. This thesis proposes a Service Oriented Architecture (SOA) based management framework that integrates heterogeneous management systems in a loose coupling manner. The key benefit of the proposed management architecture is the reduction of the complexity through service and data integration. A network management middleware layer that merges low level management functionality with higher level management operations to resolve the problem of heterogeneity was proposed. A prototype was implemented using Web Services and a testbed was developed using trouble ticket systems as the management application to demonstrate the functionality of the proposed framework. Test results show the correcting functioning of the system. It also concludes that the proposed framework fulfils the principles behind the SOA philosophy

Toward Refactoring of DMARF and GIPSY Case Studies – a Team 3 SOEN6471-S14 Project Report

The software architecture of a system is an illustration of the system which supports the understanding of the behaviour of the system. The architecture aids as the blueprint of the system, defining the work obligations which must be conceded by design and implementation teams. It is an artifact for early enquiry to make sure that a design methodology will produce a standard system. This paper depicts the software architecture and design of two frameworks DMARF and GIPSY. Primarily it inaugurates a comprehensive understanding of the frameworks and their applications. DMARF is high-volume processing of recorded audio, textual, or imagery data for pattern recognition and biometric forensic analysis, whereas GIPSY system provides a platform for a distributed multi-tier demand driven evaluation of heterogeneous programs. Secondly, the paper illustrates the use of several tools for the code analysis for both platforms and provides the outcome of the analysis. Thirdly, it establishes the architecture and design of the systems. Fourthly, it fuses the architecture for both the systems into one. The paper ends with depicting properties like code smells and refactoring to improve code quality for the frameworks

Performance evaluation of information and communications technology infrastructure for smart distribution network applications

This thesis was submitted for the degree of Master of Philosophy and awarded by Brunel University.Current electrical networks require secure, scalable and cost-effective Information and Communications Technology (ICT) solutions to facilitate the novel functionalities required by Smart Grids. Countries around the globe are investigating alternative energy sources to mitigate the current energy crisis and environmental issues experienced by many countries due to global warming, rapid growth of population, inefficient energy management, dwindling fossil fuel resources, etc. Therefore, alternative or renewable energy sources, such as wind, solar, hydro, combined heat and power, etc., are required to mitigate such a crisis and such sources will also need to be integrated in to the power grid in a distributed manner. Such distributed energy sources are mainly connected to the distribution networks and introduce huge challenges to the distribution network operator (DNO). Many of these challenges cannot be dealt with effectively using existing network operation mechanisms therefore the research and development of novel ICT solutions to support smart distribution network operation is required. This research investigated suitable ICT solutions to enable the Smart Grid to tackle these challenges and proposes ICT infrastructure models that can be used for simulation studies in order to investigate cost-effective, scalable and secure solutions for the DNOs. Initially, a Quality of Service (QoS) monitoring test-bed was proposed to evaluate the performance of bandwidth intensive applications, such as smart meter data transmission. Simulation studies for different communication technologies, cellular and Power Line Communication (PLC), were also carried out and the simulation models were verified using experimental test results. Finally, the modelling and analysis of smart metering infrastructure was carried out using simulation and extensive studies were performed to evaluate the data transmission rate performance for different configurations of smart meters and concentrators

Service-oriented architecture for device lifecycle support in industrial automation

Dissertação para obtenção do Grau de Doutor em Engenharia Electrotécnica e de Computadores Especialidade: Robótica e Manufactura IntegradaThis thesis addresses the device lifecycle support thematic in the scope of service oriented industrial automation domain. This domain is known for its plethora of heterogeneous equipment encompassing distinct functions, form factors, network interfaces, or I/O specifications supported by dissimilar software and hardware platforms. There is then an evident and crescent need to take every device into account and improve the agility performance during setup, control, management, monitoring and diagnosis phases. Service-oriented Architecture (SOA) paradigm is currently a widely endorsed approach for both business and enterprise systems integration. SOA concepts and technology are continuously spreading along the layers of the enterprise organization envisioning a unified interoperability solution. SOA promotes discoverability, loose coupling, abstraction, autonomy and composition of services relying on open web standards – features that can provide an important contribution to the industrial automation domain. The present work seized industrial automation device level requirements, constraints and needs to determine how and where can SOA be employed to solve some of the existent difficulties. Supported by these outcomes, a reference architecture shaped by distributed, adaptive and composable modules is proposed. This architecture will assist and ease the role of systems integrators during reengineering-related interventions throughout system lifecycle. In a converging direction, the present work also proposes a serviceoriented device model to support previous architecture vision and goals by including embedded added-value in terms of service-oriented peer-to-peer discovery and identification, configuration, management, as well as agile customization of device resources. In this context, the implementation and validation work proved not simply the feasibility and fitness of the proposed solution to two distinct test-benches but also its relevance to the expanding domain of SOA applications to support device lifecycle in the industrial automation domain