A framework of justification criteria for advanced manufacturing technology implementation in small and medium enterprises

Today in order to stay in businesses and prosper, Small and Medium Enterprises (SMEs) are seeking higher electiveness and competitiveness across the entire cycle of marketing, product design, manufacture, test and sales. SMEs play an increasingly important role in all aspects of competitiveness: both products and production techniques, but also management methods, the organization of the firm and human resources training. One of the ways by which SMEs can achieve a competitive advantage in manufacturing is through the implementation of Advanced Manufacturing Technology (AMT). An increasing number of them have chosen and are choosing various levels of AMT as the solution. Realizing the importance of SMEs, an attempt has been made in this paper to review the application of AMT in SMEs. Also, a framework has been offered for the implementation of AMT in SMEs. Finally, a summary of findings and conclusions are presented

Crystalline phase, surface morphology and electrical properties of monovalent-doped Nd0.75Na0.25Mn1-yCoyO3 manganites

Perovskite-type manganites Nd0.75Na0.25Mn1-yCoyO3 (y = 0 – 0.05) have been investigated to clarify the influence of Co-doped on crystal phase and morphological study as well as electrical transport properties. The Nd0.75Na0.25Mn1-yCoyO3 samples are prepared via solid state synthesis method. X-ray diffraction analysis revealed all the samples are essentially single phased and the peaks are indexed to an orthorhombic structure with Pnma space. The morphological study from scanning electron microscope shows the improvement of the grains boundaries and sizes as well as the compaction of particles can be seen as cobalt doping increased. On the other hand, the temperature dependence of electrical resistivity measurements using four-point-probe technique indicates all samples maintained an insulator like behaviour down to low temperature. Analysis of the resistivity change with respect to temperature, dlnρ/dT-1 versus T reveals a slope changes of resistivity has been observed and a boarder peak exist for y = 0 sample and the peaks become significantly obvious for y = 0.02 and 0.05 samples. The peaks are observed in the range of charge ordering (CO) transition indicate the existence of CO in the system

Numerical study of circle fractal grid perforated plate as a turbulent generator in combustion chamber

Fractal grids can be used to design turbulent flows with low power losses and high turbulence intensities for intense yet economic mixing over a region of designed length and location. The introducing circle grid perforated plate is the main aim of this present paper. In this numerical work, we want to ascertain a new approach in turbulence generators on the structure of premixes flames using perforated plate fractal-grids pattern. In this paper, we compared circle grid perforated plate by varies using its diameters, spacing and number of holes on the plate. The result showed good perceptivity of the fractal generated turbulence and the fractal flow physics. The turbulent intensity can be increased by a grid with higher blockage ratio

SMEs; Virtual research and development (R&D) teams and new product development: A literature review

Small and medium-sized enterprises (SMEs) are indeed the engines of global economic growth. Their continued growth is a major subject for the economy and employment of any country. Towards that end, virtual research and development (R&D) could be a viable option to sustain and ease the operations of SMEs. However, literature shows there has not been a great deal of research into the diverse characteristic of virtual R&D teams in SMEs. This article provides a comprehensive literature review on different aspects of virtual R&D teams collected from the reputed publications. The purpose of the literature review is to provide an outline on the structure and dynamics of R&D collaboration in SMEs. Specifying the rationale and relevance of virtual teams, the relationship between virtual R&D team for SMEs and new product development (NPD) has been examined. It concludes with identifying the gaps and feebleness in the existing literature and calls for future research in this area. It is argued to form of virtual R&D team deserves consideration at top level management for venturing into the new product development within SMEs

How can SMEs benefit from big data? Challenges and a path forward

Big data is big news, and large companies in all sectors are making significant advances in their customer relations, product selection and development and consequent profitability through using this valuable commodity. Small and medium enterprises (SMEs) have proved themselves to be slow adopters of the new technology of big data analytics and are in danger of being left behind. In Europe, SMEs are a vital part of the economy, and the challenges they encounter need to be addressed as a matter of urgency. This paper identifies barriers to SME uptake of big data analytics and recognises their complex challenge to all stakeholders, including national and international policy makers, IT, business management and data science communities. The paper proposes a big data maturity model for SMEs as a first step towards an SME roadmap to data analytics. It considers the ‘state-of-the-art’ of IT with respect to usability and usefulness for SMEs and discusses how SMEs can overcome the barriers preventing them from adopting existing solutions. The paper then considers management perspectives and the role of maturity models in enhancing and structuring the adoption of data analytics in an organisation. The history of total quality management is reviewed to inform the core aspects of implanting a new paradigm. The paper concludes with recommendations to help SMEs develop their big data capability and enable them to continue as the engines of European industrial and business success. Copyright © 2016 John Wiley & Sons, Ltd.Peer ReviewedPostprint (author's final draft

Virtual R&D teams in small and medium enterprises: a literature review

Small and medium enterprises (SMEs) are the driving engine behind economic growth. While SMEs play a critical role in generating employment and supporting trade, they face numerous challenges, the prominent among them are the need to respond to fasting time-to-market, low-cost and rapid solutions to complex organizational problems. Towards that end, research and development (R & D) aspect deserves particular attention to promote and facilitate the operations of SMEs. Virtual R & D team could be a viable option. However, literature shows that virtual R & D teaming in SMEs is still at its infancy. This article provides a comprehensive literature review on different aspects of virtual R & D teams collected from the reputed publications. The purpose of the state-of-the-art literature review is to provide an overview on the structure and dynamics of R & D collaboration in SMEs. Specifying the foundation and importance of virtual teams, the relationship between virtual R & D team and SMEs has been examined. It concludes with the identification of the gaps in the existing literature's and calls for future research. It is argued that setting-up an infrastructure for virtual R & D team in SMEs still requires a large amount of engineering efforts and deserves consideration at top level management

Fuzzification of quantitative data to predict tumour size of colorectal cancer

Regression analysis has become more popular among researchers as a standard tool in analyzing data. This paper used fuzzy linear regression model (FLRM) to predict tumour size of colorectal cancer (CRC) data in Malaysia. 180 patients with colorectal cancer received treatment in hospital were recorded by nurses and doctors. Based on the patient records, a triangular fuzzy data will be built toward the size of the tumour. Mean square error (MSE) and root mean square error (RMSE) will be measured as a part of the process for predicting the size of the tumour. The degree of fitting adjusted is set between 0 and 1 in order to find the least error. It was found that the combination of FLRM model with fuzzy data provided a better prediction compared to the FLRM model alone. Hence, this study concluded that the tumour size is directly proportional to several factors such as gender, ethnic, icd 10, TNM staging, diabetes mellitus, Crohn’s disease

The "fuzzy front end" of product development: An exploratory study

The aim of this paper is to describe front-end activities in practice and get first hints for effects of the front end on project outcome and the meaning of contextual factors. The results of an exploratory study of fourteen product development projects are contrary to the wide-spread opinion that the quality of execution of front-end activities in practice is low. Although, due to the small sample size, our findings are limited, there seems to be an indirect impact of the fuzzy front end on project outcome: Front-end activities may reduce deviations during the following development phase. Furthermore, company size and the degree of newness of a project to a firm seem to have an influence on the fuzzy front end. Therefore, for future research, we suggest large-scale studies which examines direct and indirect effects and consider contextual factors, e.g., by evaluating structural equation models. --Fuzzy front end,idea generation,project selection,project planning

An investigation into the cloud manufacturing based approach towards global high value manufacturing for smes

Considering the high labour costs and intensive competitions in the global market, improving the effective deployment of innovative design and manufacturing and utilisation of all existing technical information, for the full life cycle of the product, is essential and much needed for manufacturing Small and Medium sized Enterprises (SMEs) in particular. Cloud Manufacturing , as a powerful tool supported with ‘big data’, will likely enable SMEs to move towards using dynamic scalability and ‘free’ available data resources in a virtual manner and to provide solution-based, value-added, digital-driven manufacturing service over the Internet. The research presented in this paper aims to develop a cloud manufacturing based approach towards value-added, knowledge/solution driven manufacturing for SMEs, where there are many constraints in engaging responsive high value manufacturing. The paper will present the framework, architecture and key moderator technologies for implementing cloud manufacturing and the associated application perspectives. The paper concludes with further discussion on the potential and application of the approach

SMEs; Virtual research and development (R&D) teams and new product development: A literature review

Small and medium-sized enterprises (SMEs) are indeed the engines of global economic growth. Their continued growth is a major subject for the economy and employment of any country. Towards that end, virtual research and development (R&D) could be a viable option to sustain and ease the operations of SMEs. However, literature shows there has not been a great deal of research into the diverse characteristic of virtual R&D teams in SMEs. This article provides a comprehensive literature review on different aspects of virtual R&D teams collected from the reputed publications. The purpose of the literature review is to provide an outline on the structure and dynamics of R&D collaboration in SMEs. Specifying the rationale and relevance of virtual teams, the relationship between virtual R&D team for SMEs and new product development (NPD) has been examined. It concludes with identifying the gaps and feebleness in the existing literature and calls for future research in this area. It is argued to form of virtual R&D team deserves consideration at top level management for venturing into the new product development within SMEs.Virtual teams, small and medium enterprises, new product development, R&D