467,378 research outputs found
Model-Based Analysis of User Behaviors in Medical Cyber-Physical Systems
Human operators play a critical role in various Cyber-Physical System (CPS) domains, for example, transportation, smart living, robotics, and medicine. The rapid advancement of automation technology is driving a trend towards deep human-automation cooperation in many safety-critical applications, making it important to explicitly consider user behaviors throughout the system development cycle. While past research has generated extensive knowledge and techniques for analyzing human-automation interaction, in many emerging applications, it remains an open challenge to develop quantitative models of user behaviors that can be directly incorporated into the system-level analysis.
This dissertation describes methods for modeling different types of user behaviors in medical CPS and integrating the behavioral models into system analysis. We make three main contributions. First, we design a model-based analysis framework to evaluate, improve, and formally verify the robustness of generic (i.e., non-personalized) user behaviors that are typically driven by rule-based clinical protocols. We conceptualize a data-driven technique to predict safety-critical events at run-time in the presence of possible time-varying process disturbances. Second, we develop a methodology to systematically identify behavior variables and functional relationships in healthcare applications. We build personalized behavior models and analyze population-level behavioral patterns. Third, we propose a sequential decision filtering technique by leveraging a generic parameter-invariant test to validate behavior information that may be measured through unreliable channels, which is a practical challenge in many human-in-the-loop applications. A unique strength of this validation technique is that it achieves high inter-subject consistency despite uncertain parametric variances in the physiological processes, without needing any individual-level tuning. We validate the proposed approaches by applying them to several case studies
Intelligent Product Brokering for E-Commerce: An Incremental Approach to Unaccounted Attribute Detection
This research concentrates on designing generic product-brokering agent to understand user preference towards a product category and recommends a list of products to the user according to the preference captured by the agent. The proposed solution is able to detect both quantifiable and non-quantifiable attributes through a user feedback system. Unlike previous approaches, this research allows the detection of unaccounted attributes that are not within the ontology of the system. No tedious change of the algorithm, database, or ontology is required when a new product attribute is introduced. This approach only requires the attribute to be within the description field of the product. The system analyzes the general product descriptions field and creates a list of candidate attributes affecting the user’s preference. A genetic algorithm verifies these candidate attributes and excess attributes are identified and filtered off. A prototype has been created and our results show positive results in the detection of unaccounted attributes affecting a user
Recommended from our members
Design of generic modular reconfigurable platforms (GMRPS) for a product-oriented micro manufacturing system
With the proposition of the concept of product-service systems, many manufacturers are focusing on selling services or functionality rather than products. Industrial production is shifting production models from mass production to mass customization and highly personalized needs. As a result, there is a tendency for manufacturing system suppliers to develop product-oriented systems to responsively cope with the dynamic fast moving competitive market. The key features of such a manufacturing system are the reconfigurability and adaptability, which can enable the system respond to the changeable needs of customers quickly and adaptively. Therefore, one of the challenges for the micro manufacturing system provider has been the design of a reconfigurable machine platform which will provide the functionalities and flexibility required by the product-oriented systems.
In this paper, a new micro manufacturing platform, i.e. a generic modular reconfigurable platform (GMRP) is proposed in order to provide an effective means for fabrication of high quality micro products at low cost in a responsive manner. The GMRP-based system aims to be a product-oriented reconfigurable, highly responsive manufacturing system particularly for high value nano/micro manufacturing purposes. To reuse components and decrease material consumption, GMRP is characterized by hybrid micro manufacturing processes, modularity of key components, and reconfigurability of machine platforms and key components. Furthermore, a practical methodology for the design of reconfigurable machine platforms is discussed against the requirements from product-driven micro manufacturing and its extension for adaptive production
Towards a generic platform for developing CSCL applications using Grid infrastructure
The goal of this paper is to explore the possibility of using CSCL component-based software under a Grid infrastructure. The merge of these technologies represents an attractive, but probably quite laborious enterprise if we consider not only the benefits but also the barriers that we have to overcome. This work presents an attempt toward this direction by developing a generic platform of CSCL components and discussing the advantages that we could obtain if we adapted it to the Grid. We then propose a means that could make this adjustment possible due to the high degree of genericity that our library component is endowed with by being based on the generic programming paradigm. Finally, an application of our library is proposed both for validating the adequacy of the platform which it is based on and for indicating the possibilities gained by using it under the Grid.Peer ReviewedPostprint (published version
Recommended from our members
Towards a change process planning tool
The relationship between a product and its design process is generally complex and not fully understood. When modifying a product, industry still rarely considers the implementation process and its consequences for other design activities in the company, which is hard to assess with conventional planning methods. Although change processes are highly constrained, product and process constraints are not usually considered together or traded off against each other when planning the change. Inadequate assessment and planning of the change implementation process can lead to costly knock-on effects across the product and the design process. This paper argues for a combination of change and process research and discusses requirements for a change process planning tool. It proposes a system for the analysis of the impact of change on the product as well as other company activities. Then, a more informed selection between change alternatives is possible
A virtual environment to support the distributed design of large made-to-order products
An overview of a virtual design environment (virtual platform) developed as part of the European Commission funded VRShips-ROPAX (VRS) project is presented. The main objectives for the development of the virtual platform are described, followed by the discussion of the techniques chosen to address the objectives, and finally a description of a use-case for the platform. Whilst the focus of the VRS virtual platform was to facilitate the design of ROPAX (roll-on passengers and cargo) vessels, the components within the platform are entirely generic and may be applied to the distributed design of any type of vessel, or other complex made-to-order products
Trusted Computing and Secure Virtualization in Cloud Computing
Large-scale deployment and use of cloud computing in industry
is accompanied and in the same time hampered by concerns regarding protection of
data handled by cloud computing providers. One of the consequences of moving
data processing and storage off company premises is that organizations have
less control over their infrastructure. As a result, cloud service (CS) clients
must trust that the CS provider is able to protect their data and
infrastructure from both external and internal attacks. Currently however, such
trust can only rely on organizational processes declared by the CS
provider and can not be remotely verified and validated by an external party.
Enabling the CS client to verify the integrity of the host where the
virtual machine instance will run, as well as to ensure that the virtual
machine image has not been tampered with, are some steps towards building
trust in the CS provider. Having the tools to perform such
verifications prior to the launch of the VM instance allows the CS
clients to decide in runtime whether certain data should be stored- or calculations
should be made on the VM instance offered by the CS provider.
This thesis combines three components -- trusted computing, virtualization technology
and cloud computing platforms -- to address issues of trust and
security in public cloud computing environments. Of the three components,
virtualization technology has had the longest evolution and is a cornerstone
for the realization of cloud computing. Trusted computing is a recent
industry initiative that aims to implement the root of trust in a hardware
component, the trusted platform module. The initiative has been formalized
in a set of specifications and is currently at version 1.2. Cloud computing
platforms pool virtualized computing, storage and network resources in
order to serve a large number of customers customers that use a multi-tenant
multiplexing model to offer on-demand self-service over broad network.
Open source cloud computing platforms are, similar to trusted computing, a
fairly recent technology in active development.
The issue of trust in public cloud environments is addressed
by examining the state of the art within cloud computing security and
subsequently addressing the issues of establishing trust in the launch of a
generic virtual machine in a public cloud environment. As a result, the thesis
proposes a trusted launch protocol that allows CS clients
to verify and ensure the integrity of the VM instance at launch time, as
well as the integrity of the host where the VM instance is launched. The protocol
relies on the use of Trusted Platform Module (TPM) for key generation and data protection.
The TPM also plays an essential part in the integrity attestation of the
VM instance host. Along with a theoretical, platform-agnostic protocol,
the thesis also describes a detailed implementation design of the protocol
using the OpenStack cloud computing platform.
In order the verify the implementability of the proposed protocol, a prototype
implementation has built using a distributed deployment of OpenStack.
While the protocol covers only the trusted launch procedure using generic
virtual machine images, it presents a step aimed to contribute towards
the creation of a secure and trusted public cloud computing environment
Realising intelligent virtual design
This paper presents a vision and focus for the CAD Centre research: the Intelligent Design Assistant (IDA). The vision is based upon the assumption that the human and computer can operate symbiotically, with the computer providing support for the human within the design process. Recently however the focus has been towards the development of integrated design platforms that provide general support irrespective of the domain, to a number of distributed collaborative designers. This is illustrated within the successfully completed Virtual Reality Ship (VRS) virtual platform, and the challenges are discussed further within the NECTISE, SAFEDOR and VIRTUE projects
- …