Fast Power and Energy Efficiency Analysis of FPGA-based Wireless Base-band Processing

Nowadays, demands for high performance keep on increasing in the wireless communication domain. This leads to a consistent rise of the complexity and designing such systems has become a challenging task. In this context, energy efficiency is considered as a key topic, especially for embedded systems in which design space is often very constrained. In this paper, a fast and accurate power estimation approach for FPGA-based hardware systems is applied to a typical wireless communication system. It aims at providing power estimates of complete systems prior to their implementations. This is made possible by using a dedicated library of high-level models that are representative of hardware IPs. Based on high-level simulations, design space exploration is made a lot faster and easier. The definition of a scenario and the monitoring of IP's time-activities facilitate the comparison of several domain-specific systems. The proposed approach and its benefits are demonstrated through a typical use case in the wireless communication domain.Comment: Presented at HIP3ES, 201

Digital signal processing: the impact of convergence on education, society and design flow

Design and development of real-time, memory and processor hungry digital signal processing systems has for decades been accomplished on general-purpose microprocessors. Increasing needs for high-performance DSP systems made these microprocessors unattractive for such implementations. Various attempts to improve the performance of these systems resulted in the use of dedicated digital signal processing devices like DSP processors and the former heavyweight champion of electronics design – Application Specific Integrated Circuits. The advent of RAM-based Field Programmable Gate Arrays has changed the DSP design flow. Software algorithmic designers can now take their DSP algorithms right from inception to hardware implementation, thanks to the increasing availability of software/hardware design flow or hardware/software co-design. This has led to a demand in the industry for graduates with good skills in both Electrical Engineering and Computer Science. This paper evaluates the impact of technology on DSP-based designs, hardware design languages, and how graduate/undergraduate courses have changed to suit this transition

A Cross-level Verification Methodology for Digital IPs Augmented with Embedded Timing Monitors

Smart systems are characterized by the integration in a single device of multi-domain subsystems of different technological domains, namely, analog, digital, discrete and power devices, MEMS, and power sources. Such challenges, emerging from the heterogeneous nature of the whole system, combined with the traditional challenges of digital design, directly impact on performance and on propagation delay of digital components. This article proposes a design approach to enhance the RTL model of a given digital component for the integration in smart systems with the automatic insertion of delay sensors, which can detect and correct timing failures. The article then proposes a methodology to verify such added features at system level. The augmented model is abstracted to SystemC TLM, which is automatically injected with mutants (i.e., code mutations) to emulate delays and timing failures. The resulting TLM model is finally simulated to identify timing failures and to verify the correctness of the inserted delay monitors. Experimental results demonstrate the applicability of the proposed design and verification methodology, thanks to an efficient sensor-aware abstraction methodology, by applying the flow to three complex case studies

Rapid-Prototyping Emulation System for Embedded System Hardware Verification, using a SystemC Control System Environment and Reconfigurable Multimedia Hardware Development Platform

This paper describes research into the suitability of using SystemC for rapid prototyping of embedded systems. SystemC[1][2][3] communication interface protocols [4][5] are interfaced with a reconfigurable hardware system platform to provide a real-time emulation environment, allowing SystemC simulations to be directly translated into real-time solutions. The consequent Rapid Prototyping Emulation System Platform1, suitable for the implementation of consumer level multimedia systems, is described, including the system architecture, SystemC Controller model, the FPGA configured MicroBlaze CPU system and additional logic devices implemented on the Multimedia development board used for the hardware in the PESP, illustrated in the context of a typical application

Energy-efficient hardware design based on high-level synthesis

This dissertation describes research activities broadly concerning the area of High-level synthesis (HLS), but more specifically, regarding the HLS-based design of energy-efficient hardware (HW) accelerators. HW accelerators, mostly implemented on FPGAs, are integral to the heterogeneous architectures employed in modern high performance computing (HPC) systems due to their ability to speed up the execution while dramatically reducing the energy consumption of computationally challenging portions of complex applications. Hence, the first activity was regarding an HLS-based approach to directly execute an OpenCL code on an FPGA instead of its traditional GPU-based counterpart. Modern FPGAs offer considerable computational capabilities while consuming significantly smaller power as compared to high-end GPUs. Several different implementations of the K-Nearest Neighbor algorithm were considered on both FPGA- and GPU-based platforms and their performance was compared. FPGAs were generally more energy-efficient than the GPUs in all the test cases. Eventually, we were also able to get a faster (in terms of execution time) FPGA implementation by using an FPGA-specific OpenCL coding style and utilizing suitable HLS directives. The second activity was targeted towards the development of a methodology complementing HLS to automatically derive power optimization directives (also known as "power intent") from a system-level design description and use it to drive the design steps after HLS, by producing a directive file written using the common power format (CPF) to achieve power shut-off (PSO) in case of an ASIC design. The proposed LP-HLS methodology reduces the design effort by enabling designers to infer low power information from the system-level description of a design rather than at the RTL. This methodology required a SystemC description of a generic power management module to describe the design context of a HW module also modeled in SystemC, along with the development of a tool to automatically produce the CPF file to accomplish PSO. Several test cases were considered to validate the proposed methodology and the results demonstrated its ability to correctly extract the low power information and apply it to achieve power optimization in the backend flow