UAV/UGV Autonomous Cooperation: UAV Assists UGV to Climb a Cliff by Attaching a Tether

This paper proposes a novel cooperative system for an Unmanned Aerial Vehicle (UAV) and an Unmanned Ground Vehicle (UGV) which utilizes the UAV not only as a flying sensor but also as a tether attachment device. Two robots are connected with a tether, allowing the UAV to anchor the tether to a structure located at the top of a steep terrain, impossible to reach for UGVs. Thus, enhancing the poor traversability of the UGV by not only providing a wider range of scanning and mapping from the air, but also by allowing the UGV to climb steep terrains with the winding of the tether. In addition, we present an autonomous framework for the collaborative navigation and tether attachment in an unknown environment. The UAV employs visual inertial navigation with 3D voxel mapping and obstacle avoidance planning. The UGV makes use of the voxel map and generates an elevation map to execute path planning based on a traversability analysis. Furthermore, we compared the pros and cons of possible methods for the tether anchoring from multiple points of view. To increase the probability of successful anchoring, we evaluated the anchoring strategy with an experiment. Finally, the feasibility and capability of our proposed system were demonstrated by an autonomous mission experiment in the field with an obstacle and a cliff.Comment: 7 pages, 8 figures, accepted to 2019 International Conference on Robotics & Automation. Video: https://youtu.be/UzTT8Ckjz1

Reimagining Robotic Walkers For Real-World Outdoor Play Environments With Insights From Legged Robots: A Scoping Review

PURPOSE For children with mobility impairments, without cognitive delays, who want to participate in outdoor activities, existing assistive technology (AT) to support their needs is limited. In this review, we investigate the control and design of a selection of robotic walkers while exploring a selection of legged robots to develop solutions that address this gap in robotic AT. METHOD We performed a comprehensive literature search from four main databases: PubMed, Google Scholar, Scopus, and IEEE Xplore. The keywords used in the search were the following: “walker”, “rollator”, “smart walker”, “robotic walker”, “robotic rollator”. Studies were required to discuss the control or design of robotic walkers to be considered. A total of 159 papers were analyzed. RESULTS From the 159 papers, 127 were excluded since they failed to meet our inclusion criteria. The total number of papers analyzed included publications that utilized the same device, therefore we classified the remaining 32 studies into groups based on the type of robotic walker used. This paper reviewed 15 different types of robotic walkers. CONCLUSIONS The ability of many-legged robots to negotiate and transition between a range of unstructured substrates suggests several avenues of future consideration whose pursuit could benefit robotic AT, particularly regarding the present limitations of wheeled paediatric robotic walkers for children’s daily outside use. For more information: Kod*lab (link to kodlab.seas.upenn.edu

System of Terrain Analysis, Energy Estimation and Path Planning for Planetary Exploration by Robot Teams

NASA’s long term plans involve a return to manned moon missions, and eventually sending humans to mars. The focus of this project is the use of autonomous mobile robotics to enhance these endeavors. This research details the creation of a system of terrain classification, energy of traversal estimation and low cost path planning for teams of inexpensive and potentially expendable robots. The first stage of this project was the creation of a model which estimates the energy requirements of the traversal of varying terrain types for a six wheel rocker-bogie rover. The wheel/soil interaction model uses Shibly’s modified Bekker equations and incorporates a new simplified rocker-bogie model for estimating wheel loads. In all but a single trial the relative energy requirements for each soil type were correctly predicted by the model. A path planner for complete coverage intended to minimize energy consumption was designed and tested. It accepts as input terrain maps detailing the energy consumption required to move to each adjacent location. Exploration is performed via a cost function which determines the robot’s next move. This system was successfully tested for multiple robots by means of a shared exploration map. At peak efficiency, the energy consumed by our path planner was only 56% that used by the best case back and forth coverage pattern. After performing a sensitivity analysis of Shibly’s equations to determine which soil parameters most affected energy consumption, a neural network terrain classifier was designed and tested. The terrain classifier defines all traversable terrain as one of three soil types and then assigns an assumed set of soil parameters. The classifier performed well over all, but had some difficulty distinguishing large rocks from sand. This work presents a system which successfully classifies terrain imagery into one of three soil types, assesses the energy requirements of terrain traversal for these soil types and plans efficient paths of complete coverage for the imaged area. While there are further efforts that can be made in all areas, the work achieves its stated goals

Using Lidar Intensity for Robot Navigation

We present Multi-Layer Intensity Map, a novel 3D object representation for robot perception and autonomous navigation. Intensity maps consist of multiple stacked layers of 2D grid maps each derived from reflected point cloud intensities corresponding to a certain height interval. The different layers of intensity maps can be used to simultaneously estimate obstacles' height, solidity/density, and opacity. We demonstrate that intensity maps' can help accurately differentiate obstacles that are safe to navigate through (e.g. beaded/string curtains, pliable tall grass), from ones that must be avoided (e.g. transparent surfaces such as glass walls, bushes, trees, etc.) in indoor and outdoor environments. Further, to handle narrow passages, and navigate through non-solid obstacles in dense environments, we propose an approach to adaptively inflate or enlarge the obstacles detected on intensity maps based on their solidity, and the robot's preferred velocity direction. We demonstrate these improved navigation capabilities in real-world narrow, dense environments using a real Turtlebot and Boston Dynamics Spot robots. We observe significant increases in success rates to more than 50%, up to a 9.5% decrease in normalized trajectory length, and up to a 22.6% increase in the F-score compared to current navigation methods using other sensor modalities.Comment: 9 pages, 7 figure

Context classification for service robots

This dissertation presents a solution for environment sensing using sensor fusion techniques and a context/environment classification of the surroundings in a service robot, so it could change his behavior according to the different rea-soning outputs. As an example, if a robot knows he is outdoors, in a field environment, there can be a sandy ground, in which it should slow down. Contrariwise in indoor environments, that situation is statistically unlikely to happen (sandy ground). This simple assumption denotes the importance of context-aware in automated guided vehicles

Exploring the Use of Wearables to Enable Indoor Navigation for Blind Users

One of the challenges that people with visual impairments (VI) have to have to confront daily, is navigating independently through foreign or unfamiliar spaces.Navigating through unfamiliar spaces without assistance is very time consuming and leads to lower mobility. Especially in the case of indoor environments where the use of GPS is impossible, this task becomes even harder.However, advancements in mobile and wearable computing pave the path to new cheap assistive technologies that can make the lives of people with VI easier.Wearable devices have great potential for assistive applications for users who are blind as they typically feature a camera and support hands and eye free interaction. Smart watches and heads up displays (HUDs), in combination with smartphones, can provide a basis for development of advanced algorithms, capable of providing inexpensive solutions for navigation in indoor spaces. New interfaces are also introduced making the interaction between users who are blind and mo-bile devices more intuitive.This work presents a set of new systems and technologies created to help users with VI navigate indoor environments. The first system presented is an indoor navigation system for people with VI that operates by using sensors found in mo-bile devices and virtual maps of the environment. The second system presented helps users navigate large open spaces with minimum veering. Next a study is conducted to determine the accuracy of pedometry based on different body placements of the accelerometer sensors. Finally, a gesture detection system is introduced that helps communication between the user and mobile devices by using sensors in wearable devices

A multisensor SLAM for dense maps of large scale environments under poor lighting conditions

This thesis describes the development and implementation of a multisensor large scale autonomous mapping system for surveying tasks in underground mines. The hazardous nature of the underground mining industry has resulted in a push towards autonomous solutions to the most dangerous operations, including surveying tasks. Many existing autonomous mapping techniques rely on approaches to the Simultaneous Localization and Mapping (SLAM) problem which are not suited to the extreme characteristics of active underground mining environments. Our proposed multisensor system has been designed from the outset to address the unique challenges associated with underground SLAM. The robustness, self-containment and portability of the system maximize the potential applications.The multisensor mapping solution proposed as a result of this work is based on a fusion of omnidirectional bearing-only vision-based localization and 3D laser point cloud registration. By combining these two SLAM techniques it is possible to achieve some of the advantages of both approaches – the real-time attributes of vision-based SLAM and the dense, high precision maps obtained through 3D lasers. The result is a viable autonomous mapping solution suitable for application in challenging underground mining environments.A further improvement to the robustness of the proposed multisensor SLAM system is a consequence of incorporating colour information into vision-based localization. Underground mining environments are often dominated by dynamic sources of illumination which can cause inconsistent feature motion during localization. Colour information is utilized to identify and remove features resulting from illumination artefacts and to improve the monochrome based feature matching between frames.Finally, the proposed multisensor mapping system is implemented and evaluated in both above ground and underground scenarios. The resulting large scale maps contained a maximum offset error of ±30mm for mapping tasks with lengths over 100m

RoboCup@Home: Analysis and results of evolving competitions for domestic and service robots

Scientific competitions are becoming more common in many research areas of artificial intelligence and robotics, since they provide a shared testbed for comparing different solutions and enable the exchange of research results. Moreover, they are interesting for general audiences and industries. Currently, many major research areas in artificial intelligence and robotics are organizing multiple-year competitions that are typically associated with scientific conferences. One important aspect of such competitions is that they are organized for many years. This introduces a temporal evolution that is interesting to analyze. However, the problem of evaluating a competition over many years remains unaddressed. We believe that this issue is critical to properly fuel changes over the years and measure the results of these decisions. Therefore, this article focuses on the analysis and the results of evolving competitions. In this article, we present the RoboCup@Home competition, which is the largest worldwide competition for domestic service robots, and evaluate its progress over the past seven years. We show how the definition of a proper scoring system allows for desired functionalities to be related to tasks and how the resulting analysis fuels subsequent changes to achieve general and robust solutions implemented by the teams. Our results show not only the steadily increasing complexity of the tasks that RoboCup@Home robots can solve but also the increased performance for all of the functionalities addressed in the competition. We believe that the methodology used in RoboCup@Home for evaluating competition advances and for stimulating changes can be applied and extended to other robotic competitions as well as to multi-year research projects involving Artificial Intelligence and Robotics