Studies on the Impact of Cache Configuration on Multicore Processor

The demand for a powerful memory subsystem is increasing with increase in the number of cores in a multicore processor. The technology adapted to meet the above demands are: increasing the cache size, increasing the number of levels of caches and bymeans of a powerful interconnection network. Caches feeds the processing element at a faster rate. They also provide high bandwidth local memory to work with. In this research, an attempt has beenmade to analyze the impact of cache size on performance of multicore processors by varying L1 and L2 cache size on the multicore processor with internal network (MPIN), also referenced from NIAGRA architecture. As the number of cores increases, traditional on-chip interconnect like bus and crossbar proves to be less efficient as well as suffers from poor scalability. In order to overcome the scalability and efficiency issues in these conventional interconnects, ring based design has been proposed. The effect of interconnect on the performance of multicore processors has been analyzed and a novel scalable on-chip interconnection mechanism (INoC) for multicore processors has been proposed. The benchmark results are presented using a full system simulator. Results shows that, using the proposed INoC,execution time can be significantly reduced, compared with MPIN.Cache size and set-associativity are the features on which the cache performance is dependent. If the cache size is doubled, then the cache performance can increase but at the cost of high hardware, larger area and more power consumption. Moreover, considering the small form-factor of themobile processors, increase in cache size affects the device size and battery running time. Re-organization and reanalysis of cache onfiguration ofmobile processors are required for achieving better cache performance, lower power consumption and chip area. With identical cache size, performance gained can be obtained from a novel cache mechanism. For simulation, we used SPLASH2 benchmark suite

Boosting performance of transactional memory through transactional read tracking and set associative locks

Multi-core processors have become so prevalent in server, desktop, and even embedded systems that they are considered the norm for modem computing systems. The trend is likely toward many-core processors with many more than just 2, 4, or 8 cores per CPU. To benefit from the increasing number of cores per chip, application developers have to develop parallel programs [1]. Traditional lock-based programming is too difficult and error prone for most of programmers and is the domain of experts. Deadlock, race, and other synchronization bugs are some of the challenges of lock-based programming. To make parallel programming mainstream, it is necessary to adapt parallel programming by the majority of programmers and not just experts, and thus simplifying parallel programming has become an important challenge. Transactional Memory (TM) is a promising programming model for managing concurrent accesses to the shared memory locations. Transactional memory allows a programmer to specify a section of a code to be "'transactional", and the underlying system guarantees atomic execution of the code. This simplifies parallel programming and reduces the possibility of synchronization bugs. This thesis develops several software- and hardware-based techniques to improve performance of existing transactional memory systems. The first technique is Transactional Read Tracking (TRT). TRT is a software-based approach that employs a locking mechanism for transactional read and write operations. The performance of TRT depends on memory access patterns of applications. In some cases, TRT falls behind the baseline scheme. To further improve performance of TRT, we introduce two hybrid methods that dynamically switches between TRT and the baseline scheme based on applications’ behavior. The second optimization technique is Set Associative Lock (SAL). Memory locations are mapped to a lock table in order to synchronize accesses to the shared memory locations. Direct mapped lock tables usually result in collision which leads to false aborts. In SAL, we increase associativity of the lock table to reduce false abort. While SAL improves performance in most of the applications, in some cases, it increases execution time due to overhead of lock tables in software. To cope with this problem, we propose Hardware-SAL (HW-SAL) which moves the set associative lock table to the hardware. As such, true power of set associativity will be harnessed without sacrificing performance

An efficient design space exploration framework to optimize power-efficient heterogeneous many-core multi-threading embedded processor architectures

By the middle of this decade, uniprocessor architecture performance had hit a roadblock due to a combination of factors, such as excessive power dissipation due to high operating frequencies, growing memory access latencies, diminishing returns on deeper instruction pipelines, and a saturation of available instruction level parallelism in applications. An attractive and viable alternative embraced by all the processor vendors was multi-core architectures where throughput is improved by using micro-architectural features such as multiple processor cores, interconnects and low latency shared caches integrated on a single chip. The individual cores are often simpler than uniprocessor counterparts, use hardware multi-threading to exploit thread-level parallelism and latency hiding and typically achieve better performance-power figures. The overwhelming success of the multi-core microprocessors in both high performance and embedded computing platforms motivated chip architects to dramatically scale the multi-core processors to many-cores which will include hundreds of cores on-chip to further improve throughput. With such complex large scale architectures however, several key design issues need to be addressed. First, a wide range of micro- architectural parameters such as L1 caches, load/store queues, shared cache structures and interconnection topologies and non-linear interactions between them define a vast non-linear multi-variate micro-architectural design space of many-core processors; the traditional method of using extensive in-loop simulation to explore the design space is simply not practical. Second, to accurately evaluate the performance (measured in terms of cycles per instruction (CPI)) of a candidate design, the contention at the shared cache must be accounted in addition to cycle-by-cycle behavior of the large number of cores which superlinearly increases the number of simulation cycles per iteration of the design exploration. Third, single thread performance does not scale linearly with number of hardware threads per core and number of cores due to memory wall effect. This means that at every step of the design process designers must ensure that single thread performance is not unacceptably slowed down while increasing overall throughput. While all these factors affect design decisions in both high performance and embedded many-core processors, the design of embedded processors required for complex embedded applications such as networking, smart power grids, battlefield decision-making, consumer electronics and biomedical devices to name a few, is fundamentally different from its high performance counterpart because of the need to consider (i) low power and (ii) real-time operations. This implies the design objective for embedded many-core processors cannot be to simply maximize performance, but improve it in such a way that overall power dissipation is minimized and all real-time constraints are met. This necessitates additional power estimation models right at the design stage to accurately measure the cost and reliability of all the candidate designs during the exploration phase. In this dissertation, a statistical machine learning (SML) based design exploration framework is presented which employs an execution-driven cycle- accurate simulator to accurately measure power and performance of embedded many-core processors. The embedded many-core processor domain is Network Processors (NePs) used to processed network IP packets. Future generation NePs required to operate at terabits per second network speeds captures all the aspects of a complex embedded application consisting of shared data structures, large volume of compute-intensive and data-intensive real-time bound tasks and a high level of task (packet) level parallelism. Statistical machine learning (SML) is used to efficiently model performance and power of candidate designs in terms of wide ranges of micro-architectural parameters. The method inherently minimizes number of in-loop simulations in the exploration framework and also efficiently captures the non-linear interactions between the micro-architectural design parameters. To ensure scalability, the design space is partitioned into (i) core-level micro-architectural parameters to optimize single core architectures subject to the real-time constraints and (ii) shared memory level micro- architectural parameters to explore the shared interconnection network and shared cache memory architectures and achieves overall optimality. The cost function of our exploration algorithm is the total power dissipation which is minimized, subject to the constraints of real-time throughput (as determined from the terabit optical network router line-speed) required in IP packet processing embedded application

Doctor of Philosophy

dissertationWith the explosion of chip transistor counts, the semiconductor industry has struggled with ways to continue scaling computing performance in line with historical trends. In recent years, the de facto solution to utilize excess transistors has been to increase the size of the on-chip data cache, allowing fast access to an increased portion of main memory. These large caches allowed the continued scaling of single thread performance, which had not yet reached the limit of instruction level parallelism (ILP). As we approach the potential limits of parallelism within a single threaded application, new approaches such as chip multiprocessors (CMP) have become popular for scaling performance utilizing thread level parallelism (TLP). This dissertation identifies the operating system as a ubiquitous area where single threaded performance and multithreaded performance have often been ignored by computer architects. We propose that novel hardware and OS co-design has the potential to significantly improve current chip multiprocessor designs, enabling increased performance and improved power efficiency. We show that the operating system contributes a nontrivial overhead to even the most computationally intense workloads and that this OS contribution grows to a significant fraction of total instructions when executing several common applications found in the datacenter. We demonstrate that architectural improvements have had little to no effect on the performance of the OS over the last 15 years, leaving ample room for improvements. We specifically consider three potential solutions to improve OS execution on modern processors. First, we consider the potential of a separate operating system processor (OSP) operating concurrently with general purpose processors (GPP) in a chip multiprocessor organization, with several specialized structures acting as efficient conduits between these processors. Second, we consider the potential of segregating existing caching structures to decrease cache interference between the OS and application. Third, we propose that there are components within the OS itself that should be refactored to be both multithreaded and cache topology aware, which in turn, improves the performance and scalability of many-threaded applications

Microarchitectural techniques to reduce energy consumption in the memory hierarchy

This thesis states that dynamic profiling of the memory reference stream can improve energy and performance in the memory hierarchy. The research presented in this theses provides multiple instances of using lightweight hardware structures to profile the memory reference stream. The objective of this research is to develop microarchitectural techniques to reduce energy consumption at different levels of the memory hierarchy. Several simple and implementable techniques were developed as a part of this research. One of the techniques identifies and eliminates redundant refresh operations in DRAM and reduces DRAM refresh power. Another, reduces leakage energy in L2 and higher level caches for multiprocessor systems. The emphasis of this research has been to develop several techniques of obtaining energy savings in caches using a simple hardware structure called the counting Bloom filter (CBF). CBFs have been used to predict L2 cache misses and obtain energy savings by not accessing the L2 cache on a predicted miss. A simple extension of this technique allows CBFs to do way-estimation of set associative caches to reduce energy in cache lookups. Another technique using CBFs track addresses in a Virtual Cache and reduce false synonym lookups. Finally this thesis presents a technique to reduce dynamic power consumption in level one caches using significance compression. The significant energy and performance improvements demonstrated by the techniques presented in this thesis suggest that this work will be of great value for designing memory hierarchies of future computing platforms.Ph.D.Committee Chair: Lee, Hsien-Hsin S.; Committee Member: Cahtterjee,Abhijit; Committee Member: Mukhopadhyay, Saibal; Committee Member: Pande, Santosh; Committee Member: Yalamanchili, Sudhaka