A Robust Localization System for Inspection Robots in Sewer Networks †

Sewers represent a very important infrastructure of cities whose state should be monitored periodically. However, the length of such infrastructure prevents sensor networks from being applicable. In this paper, we present a mobile platform (SIAR) designed to inspect the sewer network. It is capable of sensing gas concentrations and detecting failures in the network such as cracks and holes in the floor and walls or zones were the water is not flowing. These alarms should be precisely geo-localized to allow the operators performing the required correcting measures. To this end, this paper presents a robust localization system for global pose estimation on sewers. It makes use of prior information of the sewer network, including its topology, the different cross sections traversed and the position of some elements such as manholes. The system is based on a Monte Carlo Localization system that fuses wheel and RGB-D odometry for the prediction stage. The update step takes into account the sewer network topology for discarding wrong hypotheses. Additionally, the localization is further refined with novel updating steps proposed in this paper which are activated whenever a discrete element in the sewer network is detected or the relative orientation of the robot over the sewer gallery could be estimated. Each part of the system has been validated with real data obtained from the sewers of Barcelona. The whole system is able to obtain median localization errors in the order of one meter in all cases. Finally, the paper also includes comparisons with state-of-the-art Simultaneous Localization and Mapping (SLAM) systems that demonstrate the convenience of the approach.Unión Europea ECHORD ++ 601116Ministerio de Ciencia, Innovación y Universidades de España RTI2018-100847-B-C2

Computational intelligence approaches to robotics, automation, and control [Volume guest editors]

No abstract available

Non-Metrical Navigation Through Visual Path Control

We describe a new method for wide-area, non-metrical robot navigationwhich enables useful, purposeful motion indoors. Our method has twophases: a training phase, in which a human user directs a wheeledrobot with an attached camera through an environment while occasionallysupplying textual place names; and a navigation phase in which theuser specifies goal place names (again as text), and the robot issueslow-level motion control in order to move to the specified place. We show thatdifferences in the visual-field locations and scales of features matched acrosstraining and navigation can be used to construct a simple and robust controlrule that guides the robot onto and along the training motion path.Our method uses an omnidirectional camera, requires approximateintrinsic and extrinsic camera calibration, and is capable of effective motioncontrol within an extended, minimally-prepared building environment floorplan.We give results for deployment within a single building floor with 7 rooms, 6corridor segments, and 15 distinct place names

A Survey on Global LiDAR Localization

Knowledge about the own pose is key for all mobile robot applications. Thus pose estimation is part of the core functionalities of mobile robots. In the last two decades, LiDAR scanners have become a standard sensor for robot localization and mapping. This article surveys recent progress and advances in LiDAR-based global localization. We start with the problem formulation and explore the application scope. We then present the methodology review covering various global localization topics, such as maps, descriptor extraction, and consistency checks. The contents are organized under three themes. The first is the combination of global place retrieval and local pose estimation. Then the second theme is upgrading single-shot measurement to sequential ones for sequential global localization. The third theme is extending single-robot global localization to cross-robot localization on multi-robot systems. We end this survey with a discussion of open challenges and promising directions on global lidar localization

Long-Term Localization for Self-Driving Cars

Long-term localization is hard due to changing conditions, while relative localization within time sequences is much easier. To achieve long-term localization in a sequential setting, such as, for self-driving cars, relative localization should be used to the fullest extent, whenever possible.This thesis presents solutions and insights both for long-term sequential visual localization, and localization using global navigational satellite systems (GNSS), that push us closer to the goal of accurate and reliable localization for self-driving cars. It addresses the question: How to achieve accurate and robust, yet cost-effective long-term localization for self-driving cars?Starting in this question, the thesis explores how existing sensor suites for advanced driver-assistance systems (ADAS) can be used most efficiently, and how landmarks in maps can be recognized and used for localization even after severe changes in appearance. The findings show that:* State-of-the-art ADAS sensors are insufficient to meet the requirements for localization of a self-driving car in less than ideal conditions.GNSS and visual localization are identified as areas to improve.\ua0* Highly accurate relative localization with no convergence delay is possible by using time relative GNSS observations with a single band receiver, and no base stations.\ua0* Sequential semantic localization is identified as a promising focus point for further research based on a benchmark study comparing state-of-the-art visual localization methods in challenging autonomous driving scenarios including day-to-night and seasonal changes.\ua0* A novel sequential semantic localization algorithm improves accuracy while significantly reducing map size compared to traditional methods based on matching of local image features.\ua0* Improvements for semantic segmentation in challenging conditions can be made efficiently by automatically generating pixel correspondences between images from a multitude of conditions and enforcing a consistency constraint during training.\ua0* A segmentation algorithm with automatically defined and more fine-grained classes improves localization performance.\ua0* The performance advantage seen in single image localization for modern local image features, when compared to traditional ones, is all but erased when considering sequential data with odometry, thus, encouraging to focus future research more on sequential localization, rather than pure single image localization

Robust Modular Feature-Based Terrain-Aided Visual Navigation and Mapping

The visual feature-based Terrain-Aided Navigation (TAN) system presented in this thesis addresses the problem of constraining inertial drift introduced into the location estimate of Unmanned Aerial Vehicles (UAVs) in GPS-denied environment. The presented TAN system utilises salient visual features representing semantic or human-interpretable objects (roads, forest and water boundaries) from onboard aerial imagery and associates them to a database of reference features created a-priori, through application of the same feature detection algorithms to satellite imagery. Correlation of the detected features with the reference features via a series of the robust data association steps allows a localisation solution to be achieved with a finite absolute bound precision defined by the certainty of the reference dataset. The feature-based Visual Navigation System (VNS) presented in this thesis was originally developed for a navigation application using simulated multi-year satellite image datasets. The extension of the system application into the mapping domain, in turn, has been based on the real (not simulated) flight data and imagery. In the mapping study the full potential of the system, being a versatile tool for enhancing the accuracy of the information derived from the aerial imagery has been demonstrated. Not only have the visual features, such as road networks, shorelines and water bodies, been used to obtain a position ’fix’, they have also been used in reverse for accurate mapping of vehicles detected on the roads into an inertial space with improved precision. Combined correction of the geo-coding errors and improved aircraft localisation formed a robust solution to the defense mapping application. A system of the proposed design will provide a complete independent navigation solution to an autonomous UAV and additionally give it object tracking capability

Active Mapping and Robot Exploration: A Survey

Simultaneous localization and mapping responds to the problem of building a map of the environment without any prior information and based on the data obtained from one or more sensors. In most situations, the robot is driven by a human operator, but some systems are capable of navigating autonomously while mapping, which is called native simultaneous localization and mapping. This strategy focuses on actively calculating the trajectories to explore the environment while building a map with a minimum error. In this paper, a comprehensive review of the research work developed in this field is provided, targeting the most relevant contributions in indoor mobile robotics.This research was funded by the ELKARTEK project ELKARBOT KK-2020/00092 of the Basque Government

Reconfigurable AUV for Intervention Missions: A Case Study on Underwater Object Recovery

Starting in January 2009, the RAUVI (Reconfigurable Autonomous Underwater Vehicle for Intervention Missions) project is a 3-year coordinated research action funded by the Spanish Ministry of Research and Innovation. In this paper, the state of progress after 2 years of continuous research is reported. As a first experimental validation of the complete system, a search and recovery problem is addressed, consisting of finding and recovering a flight data recorder placed at an unknown position at the bottom of a water tank. An overview of the techniques used to successfully solve the problem in an autonomous way is provided. The obtained results are very promising and are the first step toward the final test in shallow water at the end of 2011