The role of language in engineering competence

The behaviour of engineered products is becoming less evident from their outward appearance. Thus many current engineered products have unseen properties that become evident only after protracted investigation, analysis or use. Nevertheless marketing staff, potential users, disposal experts, financiers and so on will wish to make informed decisions about products and commonly their choices will be based on more accessible descriptions, explanations, scenarios and accounts of a products use rather than their direct experience. Engineers usually work with others in enterprises that produce things or provide services. The engineer rarely provides the service or makes the goods but, as a professional, the engineer guides the rest of the enterprise and persuades others to take particular courses of action. It is clear that an engineer's central interest is the artefact. Interestingly the artefact may be in the process of design or the subject of a feasibility study and hence will have no material existence, but it will be circumscribed by a wide variety of texts including specifications, technical reports and standards. Using their specialist language and analytical techniques, the individual engineer will gain assurance about his or her view of the artefact through discussions with fellow engineers, but at some point they will have to convey that view to non-technical specialists. Within the enterprise the engineer will become either an advocate or an adversary of the artefact faced by other individuals or groups who because of their professional or cultural background will value things in different way. The role of the engineer is then as a protagonist or opponent of the artefact within, using Bruno Latour’s evocative phrase, a “Parliament of Things”. And competent engineers, as competent advocates of artifacts, need fluent linguistic and rhetorical skills as well as analytical proficiency and the knowledge that will give them the confidence to project their views. The paper examines the implications for engineering education

A Contribution to Conveying Quality Criteria in Mechanical CAD Models and Assemblies through Rubrics and Comprehensive Design Intent Quantification

Esta investigación examinó el uso de rúbricas de ensamblaje, describiendo su evolución a partir de rúbricas de piezas, y estudió cómo afectan a la autoevaluación de los estudiantes. También se valoró la evaluación de los estudiantes por los instructores, encontrando que, mientras que las rúbricas de ensamblaje fueron parcialmente comprendidas y utilizadas de manera eficiente por los estudiantes, éstas fueron usadas con más éxito por los instructores. En esta investigación se han abordado estrategias diseñadas para mejorar la comunicación de la intención de diseño en modelos CAD, acrecentando así su calidad, con directrices dirigidas a evaluar su eficiencia. Es evidente que se necesitan métricas dirigidas hacia la instrucción de la intención de diseño, ya que la intención de diseño transferida a través de modelos CAD puede realizarse en tres etapas con criterios contradictorios que deben ser equilibrados para llegar a la mejor estrategia de modelado. La investigación ha incluido el desarrollo de un método de validación que demuestra que las rúbricas son dispositivos útiles para garantizar una comunicación consistente de la intención de diseño, y son fundamentales no sólo para evaluar, sino también para comunicar las expectativas del instructor. En esta investigación se examinó cómo definir claramente las cualidades de la intención de diseño para permitir una más fácil evaluación de un ensamblaje CAD. Para todas las dimensiones de la rúbrica, se encontró más concordancia y correlación entre instructores que entre instructores y estudiantes. Existe una correlación moderada/fuerte entre los instructores para las dimensiones de la validez, completitud, concisión y claridad, mientras que existe una ligera correlación para las dimensiones de consistencia e intención del diseño. En segundo lugar, las rúbricas también pueden ser descritas como estáticas o dinámicas. Las rúbricas estáticas, existen sólo en papel, no proporcionan retroalimentación inmediata al educando. Las rúbricas dinámicas realizan cálculos que proporcionan observaciones de evaluación inmediatas al usuario. Además, pueden adaptarse a situaciones específicas dependiendo de la capacidad del usuario. Las rúbricas electrónicas son ideales para rúbricas dinámicas, y permiten el uso y desarrollo de rúbricas adaptativas y adaptables, como se describe a continuación. En tercer lugar, las rúbricas deben ser adaptables lo que debería hacerlas fácilmente comprensibles y fáciles de usar, y adaptativas. Las rúbricas de evaluación se usan cuando un experto determina el progreso pedagógico de un educando, mientras que las rúbricas formativas son empleadas por los propios estudiantes, para trazar su progreso e identificar las deficiencias escolares para las que necesitan apoyo. Las rúbricas se deben refinar y mejorar de forma continuada, en un proceso iterativo y colaborativo, hasta que se alcance un acuerdo satisfactorio, tanto entre evaluadores como entre evaluadores y alumnos. Por ello, se desarrollaron mapas de aserciones que ilustran el modo en que la estrategia de expansión-contracción adapta las rúbricas al progreso del aprendiz de CAD, a la vez que ayudan a comprender las diferentes dimensiones de la rúbrica. Basándose en los experimentos con las rúbricas de ensamblajes, es evidente que las pequeñas diferencias entre los instructores sugieren que la rúbrica de ensamblajes propuesta es lo suficientemente sofisticada como para proporcionar una evaluación acumulativa imparcial del desempeño del alumno. En consecuencia, se puede afirmar con confianza que los evaluadores pueden usarse indistintamente sin sacrificar la precisión. Sin embargo, la rúbrica de ensamblaje posee una eficacia finita para producir una autoevaluación formativa de las habilidades de ensamblaje CAD para nuevos alumnos.This research examined the use of assembly rubrics, described how they evolved from parts rubrics, and studied how they affect student self-evaluation. Instructor assessment of students was also evaluated, finding that while the assembly rubrics were partially understood and effectively used by the students, they were more successfully utilized by the instructors. Strategies designed to improve design intent communication in CAD models, in order to enhance their quality, with guidelines targeted to evaluate efficiency, have been addressed with this research. It is apparent that metrics directed toward the instruction of design intent are needed, since design intent transferred through CAD models can be performed at three stages with competing tradeoffs that must be balanced to arrive at the best modeling strategy. Research included the development of a validation approach that reflects that rubrics are valuable devices to expedite consistent design intent communication, and are vital not only for evaluation, but also for the communication of instructor expectations. This research examined how to clearly define qualities of design intent to enable easier CAD assembly assessment. It has been found that there is more inter-rater agreement and correlation between instructors than between instructors and students, for all rubric dimensions. There is strong to moderate correlation between instructors for the dimensions of validity, completeness, conciseness, and clarity, while slight correlation exists for the dimensions of consistency and design intent. Secondly, rubrics can also be described as being either static or dynamic. Static rubrics, existing in paper form only, do not provide immediate feedback to the learner. Dynamic rubrics perform calculations that provide immediate evaluative observations to the user. Besides, they can be independently adapted to specific situations depending on the capability of the user. Electronic rubrics are ideally suited for dynamic rubrics, and permit the use and development of both adaptable and adaptive rubrics, as described next. Thirdly, rubrics need to be adaptable which should make them easily understood and user-friendly, and adaptive (rubric can change itself, depending on the usage pattern). Evaluative rubrics are used when an expert determines the pedagogical progress of a learner, while formative rubrics are employed by the learners themselves, in order to chart their progress and identify scholastic deficiencies that are in need of remediation. Rubrics must be continually refined and improved, in an iterative, collaborative process, until satisfactory agreement is attained, both between raters, but also between raters and learners. Thus, assertions maps were developed, illustrating how the expand-contract strategy adapts the rubrics to CAD trainee progress, while assisting the understanding of the different rubric dimensions. Based on the assembly rubric experiments, it is apparent that the small differences between instructors suggests that the proposed assemblies rubric is sufficiently sophisticated to furnish an unbiased accumulative assessment of student performance. Accordingly, it can be confidently stated that raters can be used interchangeably without sacrificing accuracy. However, the assembly rubric possesses finite efficacy to produce formative self-evaluation of CAD assembly skills for new learners.Aquesta investigació examinà l'ús de rúbriques de acoblament, descrivint la seua evolució a partir de rúbriques de peces, i estudià cóm afecten a la autoavaluació dels estudiants. També es va valorar la avaluació dels estudiants per els instructors, trobant que, mentre que les rúbriques de acoblament van ser parcialment compreses i fetes servir de manera eficient per els estudiants, van ser usades amb mes èxit per els instructors. En aquesta investigació s'han abordat estrategues dissenyades per a millorar la comunicació de la intenció de disseny en models CAD, creixentat així la seua qualitat, amb directrius dirigides a avaluar la seua eficiència. Es evident que es necessiten mètriques dirigides cap a la instrucció de la intenció de disseny, ja que la intenció de disseny transferida a través de models CAD pot realitzar-se en tres etapes amb criteris contradictoris que deuen ser equilibrats per a arribar a la millor estratègia de modelatge. La investigació ha inclòs el desenvolupament de un mètode de validació que demostra que las rúbriques son dispositius útils per a garantir una comunicació consistent de la intenció de disseny, i son fonamentals no només per a avaluar, però també per a comunicar les expectatives de l'instructor. En aquesta investigació s'examinà com definir clarament les qualitats de la intenció de disseny per a permetre una mes fàcil avaluació de un acoblament CAD. Per a totes les dimensions de la rúbrica, es va trobar mes concordança i correlació entre instructors que no pas entre instructors i estudiants. Existeix una correlació moderada/fort entre els instructors per a les dimensions de la validesa, completesa, concisió i claredat, mentre que existeix una lleugera correlació per a les dimensions de consistència i intenció del disseny. En segon lloc, les rúbriques també poden ser descrites com estàtiques o dinàmiques. Les rúbriques estàtiques, existeixen sòls en paper, no proporcionen retroalimentació immediata a l'educand. Les rúbriques dinàmiques realitzen càlculs que proporcionen observacions de avaluació immediates al usuari. A mes, poden adaptar-se a situacions específiques dependent de la capacitat de l'usuari. Les rúbriques electròniques son ideals per a rúbriques dinàmiques, i permeten l'ús i desenvolupament de rúbriques adaptatives i adaptables, como es descriu a continuació. En tercer lloc, les rúbriques deuen ser adaptables, el que deuria ferles fàcilment comprensibles i fàcils d'usar, i adaptatives. Les rúbriques d'avaluació se usen quant un expert determina el progrés pedagògic de un educand, mentre que les rúbriques formatives son fetes servir per els propis estudiants, per a traçar el seu progrés i identificar les deficiències escolars para a les que necessiten suport. Les rúbriques es deuen refinar i millorar de forma continuada, en un procés iteratiu i col·laboratori, fins que se arriba a un acord satisfactori, tant entre avaluadors como entre avaluadors i alumnes. Por això, es desenvoluparen mapes de assercions que il·lustren el mode en que la estratègia de expansió-contracció adapta les rúbriques al progres del aprenent de CAD, a la vegada que ajuden a comprendre les diferents dimensions de la rúbrica. Basant-se en els experiments amb les rúbriques de acoblaments, es evident que les xicotetes diferencies entre els instructors suggereixen que la rúbrica de acoblaments proposta es lo suficientment sofisticada com per a proporcionar una avaluació acumulativa imparcial del acompliment de l'alumne. En conseqüència, es pot afirmar amb confiança que els avaluadors poden usar-se indistintament sense sacrificar la precisió. No obstant, la rúbrica de acoblaments posseeix una eficàcia finita per a produir una autoavaluació formativa de les habilitats de acoblament CAD per a nous alumnes.Otey, JM. (2017). A Contribution to Conveying Quality Criteria in Mechanical CAD Models and Assemblies through Rubrics and Comprehensive Design Intent Quantification [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/94627TESI

Assessment of the NASA Flight Assurance Review Program

The NASA flight assurance review program to develop minimum standard guidelines for flight assurance reviews was assessed. Documents from NASA centers and NASA headquarters to determine current design review practices and procedures were evaluated. Six reviews were identified for the recommended minimum. The practices and procedures used at the different centers to incorporate the most effective ones into the minimum standard review guidelines were analyzed and guidelines for procedures, personnel and responsibilies, review items/data checklist, and feedback and closeout were defined. The six recommended reviews and the minimum standards guidelines developed for flight assurance reviews are presented. Observations and conclusions for further improving the NASA review and quality assurance process are outlined

Apollo experience report guidance and control systems: Primary guidance, navigation, and control system development

The primary guidance, navigation, and control systems for both the lunar module and the command module are described. Development of the Apollo primary guidance systems is traced from adaptation of the Polaris Mark II system through evolution from Block I to Block II configurations; the discussion includes design concepts used, test and qualification programs performed, and major problems encountered. The major subsystems (inertial, computer, and optical) are covered. Separate sections on the inertial components (gyroscopes and accelerometers) are presented because these components represent a major contribution to the success of the primary guidance, navigation, and control system

Self-replicating systems: A systems engineering approach

A first approach to conceptualize self-replicating systems was developed from past and present abstract theories. The engineering elements of self-replicating systems are defined in terms of a basic reference system. A number of options are investigated. The growth characteristics and their problems are analyzed, the mathematics of various exponential growth options are outlined, and the problems of universal parts production and systems closure are discussed. Selected areas of further study are defined and a 20 year development and demonstration program is presented

Flexible Robot Programming using Solid Edge’s “Alternative Assemblies”

Many assembly processes in small and medium-sized enterprises are still performed by human labour. One reason for this is the need for another expert to program the robot, which would simply not fit into the company structure. To address this issue a solution is developed, which allows to program the robot directly out of the CAD software. The positions of the parts are read out of the CAD file. Specific assembly instructions have to be given by the assembly developer and integrated in the tree structure of the CAD. To avoid collisions and ensure correct insertion angles, additional waypoints are given by alternate assemblies, a functionality within Solid Edge to create and use variations of an assembly

Development of a moderate-cost device for teaching numerical control programming

The study was undertaken to develop a machine which could be used to provide a realistic experience in the operation of a numerically controlled machine at moderate cost. The machine was designed to be used in the high school industrial arts laboratory. The machine was controlled by a microcomputer which was interfaced to stepping motors which powered a plotting table and the quill feed of a drill press. A router bit was placed in the chuck, so student selected designs could be cut in wood or plastic;The development of the machine and computer program was followed by a study of the effects of its use in a high school industrial arts curriculum on the students\u27 acquisition of numerical control and automated manufacturing concepts, on their development of numerical control programming skills, and on their attitudes toward numerical control and the unit of study;The results of data analysis of the posttest and attitude instruments did not support use of the prototype machine to enhance concept acquisition, skill development, or positive attitudes toward the unit of study, although it was noted that all but four of the approximately 230 students participating in the study or pilot studies developed skills sufficient to complete at least one numerical control programming project successfully

Assessment of parametric assembly models based on CAD quality dimensions

[EN] An approach to convey CAD quality-oriented strategies to beginning users to create bottom-up assemblies is described. The work builds on previous efforts in the area of single part history-based, feature-based parametric modeling evaluation by defining, testing, and validating a set of quality dimensions that can be applied to MCAD assembly assessment. The process of redefining and adapting dimension descriptors and achievement levels of parts rubrics to make them applicable to assemblies is addressed, then the results of two experimental studies designed to analyze the inter-rater reliability of this approach to assembly evaluation are reported. Results suggest the mechanism is reliable to provide an objective assessment of assembly models. Limitations for the formative selfevaluation of CAD assembly skills are also identified.This work was partially supported by the Spanish grant DPI2017-84526-R (MINECO/AEI/FEDER, UE), project CAL-MBE, Implementation and validation of a theoretical CAD quality model in a Model-Based Enterprise (MBE) context. , and the ANNOTA2 project funded by Universitat Politècnica de València.Otey, J.; Company, P.; Contero, M.; Camba, JD. (2019). Assessment of parametric assembly models based on CAD quality dimensions. Computer-Aided Design and Applications. 16(4):628-653. https://doi.org/10.14733/cadaps.2019.628-653S62865316