6,375 research outputs found
Stellar intensity interferometry over kilometer baselines: Laboratory simulation of observations with the Cherenkov Telescope Array
A long-held astronomical vision is to realize diffraction-limited optical
aperture synthesis over kilometer baselines. This will enable imaging of
stellar surfaces and their environments, show their evolution over time, and
reveal interactions of stellar winds and gas flows in binary star systems. An
opportunity is now opening up with the large telescope arrays primarily erected
for measuring Cherenkov light in air induced by gamma rays. With suitable
software, such telescopes could be electronically connected and used also for
intensity interferometry. With no optical connection between the telescopes,
the error budget is set by the electronic time resolution of a few nanoseconds.
Corresponding light-travel distances are on the order of one meter, making the
method practically insensitive to atmospheric turbulence or optical
imperfections, permitting both very long baselines and observing at short
optical wavelengths. Theoretical modeling has shown how stellar surface images
can be retrieved from such observations and here we report on experimental
simulations. In an optical laboratory, artificial stars (single and double,
round and elliptic) are observed by an array of telescopes. Using high-speed
photon-counting solid-state detectors and real-time electronics, intensity
fluctuations are cross correlated between up to a hundred baselines between
pairs of telescopes, producing maps of the second-order spatial coherence
across the interferometric Fourier-transform plane. These experiments serve to
verify the concepts and to optimize the instrumentation and observing
procedures for future observations with (in particular) CTA, the Cherenkov
Telescope Array, aiming at order-of-magnitude improvements of the angular
resolution in optical astronomy.Comment: 18 pages, 11 figures; Presented at SPIE conference on Astronomical
Telescopes + Instrumentation in Montreal, Quebec, Canada, June 2014. To
appear in SPIE Proc.9146, Optical and Infrared Interferometry IV
(J.K.Rajagopal, M.J.Creech-Eakman, F.Malbet, eds.), 201
Mission Concept for the Single Aperture Far-Infrared (SAFIR) Observatory
The Single Aperture Far-InfraRed (SAFIR) Observatory's science goals are
driven by the fact that the earliest stages of almost all phenomena in the
universe are shrouded in absorption by and emission from cool dust and gas that
emits strongly in the far-infrared and submillimeter. Over the past several
years, there has been an increasing recognition of the critical importance of
this spectral region to addressing fundamental astrophysical problems, ranging
from cosmological questions to understanding how our own Solar System came into
being. The development of large, far-infrared telescopes in space has become
more feasible with the combination of developments for the James Webb Space
Telescope and of enabling breakthroughs in detector technology. We have
developed a preliminary but comprehensive mission concept for SAFIR, as a 10
m-class far-infrared and submillimeter observatory that would begin development
later in this decade to meet the needs outlined above. Its operating
temperature (<4K) and instrument complement would be optimized to reach the
natural sky confusion limit in the far-infrared with diffraction-limited
peformance down to at least 40 microns. This would provide a point source
sensitivity improvement of several orders of magnitude over that of Spitzer or
Herschel, with finer angular resolution, enabling imaging and spectroscopic
studies of individual galaxies in the early universe. We have considered many
aspects of the SAFIR mission, including the telescope technology, detector
needs and technologies, cooling method and required technology developments,
attitude and pointing, power systems, launch vehicle, and mission operations.
The most challenging requirements for this mission are operating temperature
and aperture size of the telescope, and the development of detector arrays.Comment: 36 page
Pupil remapping for high contrast astronomy: results from an optical testbed
The direct imaging and characterization of Earth-like planets is among the
most sought-after prizes in contemporary astrophysics, however current optical
instrumentation delivers insufficient dynamic range to overcome the vast
contrast differential between the planet and its host star. New opportunities
are offered by coherent single mode fibers, whose technological development has
been motivated by the needs of the telecom industry in the near infrared. This
paper presents a new vision for an instrument using coherent waveguides to
remap the pupil geometry of the telescope. It would (i) inject the full pupil
of the telescope into an array of single mode fibers, (ii) rearrange the pupil
so fringes can be accurately measured, and (iii) permit image reconstruction so
that atmospheric blurring can be totally removed. Here we present a laboratory
experiment whose goal was to validate the theoretical concepts underpinning our
proposed method. We successfully confirmed that we can retrieve the image of a
simulated astrophysical object (in this case a binary star) though a pupil
remapping instrument using single mode fibers.Comment: Accepted in Optics Expres
Astrometry with the Keck-Interferometer: the ASTRA project and its science
The sensitivity and astrometry upgrade ASTRA of the Keck Interferometer is
introduced. After a brief overview of the underlying interferometric
principles, the technology and concepts of the upgrade are presented. The
interferometric dual-field technology of ASTRA will provide the KI with the
means to observe two objects simultaneously, and measure the distance between
them with a precision eventually better than 100 uas. This astrometric
functionality of ASTRA will add a unique observing tool to fields of
astrophysical research as diverse as exo-planetary kinematics, binary
astrometry, and the investigation of stars accelerated by the massive black
hole in the center of the Milky Way as discussed in this contribution.Comment: 22 pages, 10 figures (low resolution), contribution to the
summerschool "Astrometry and Imaging with the Very Large Telescope
Interferometer", 2 - 13 June, 2008, Keszthely, Hungary, corrected authorlis
Shedding Light on Diatom Photonics by means of Digital Holography
Diatoms are among the dominant phytoplankters in the worl's ocean, and their
external silica investments, resembling artificial photonics crystal, are
expected to play an active role in light manipulation. Digital holography
allowed studying the interaction with light of Coscinodiscus wailesii cell wall
reconstructing the light confinement inside the cell cytoplasm, condition that
is hardly accessible via standard microscopy. The full characterization of the
propagated beam, in terms of quantitative phase and intensity, removed a
long-standing ambiguity about the origin of the light. The data were discussed
in the light of living cell behavior in response to their environment
Anisotropic conjugated polymer chain conformation tailors the energy migration in nanofibers
Conjugated polymers are complex multi-chromophore systems, with emission
properties strongly dependent on the electronic energy transfer through active
sub-units. Although the packing of the conjugated chains in the solid state is
known to be a key factor to tailor the electronic energy transfer and the
resulting optical properties, most of the current solution-based processing
methods do not allow for effectively controlling the molecular order, thus
making the full unveiling of energy transfer mechanisms very complex. Here we
report on conjugated polymer fibers with tailored internal molecular order,
leading to a significant enhancement of the emission quantum yield. Steady
state and femtosecond time-resolved polarized spectroscopies evidence that
excitation is directed toward those chromophores oriented along the fiber axis,
on a typical timescale of picoseconds. These aligned and more extended
chromophores, resulting from the high stretching rate and electric field
applied during the fiber spinning process, lead to improved emission
properties. Conjugated polymer fibers are relevant to develop optoelectronic
plastic devices with enhanced and anisotropic properties.Comment: 43 pages, 15 figures, 1 table in Journal of the American Chemical
Society, (2016
- …