46 research outputs found
Haptic Mediation through Artificial Intelligence: Magnetorheological Fluid as Vibrotactile Signal Mediator
challenges in creating reliable vibrotactile feedback within noisy environments can be addressed by developing a dynamic actuation platform. This research proposes the use of an AI-driven dynamically adaptive process to generate, mediate and verify tactile signals created for surface-based interaction. Our approach looks at vibrotactile feedback from a holistic point of view and targets creating reliable end-to-end communication across devices and environments.acceptedVersionPeer reviewe
The cockpit for the 21st century
Interactive surfaces are a growing trend in many domains. As one possible manifestation of Mark Weiserâs vision of ubiquitous and disappearing computers in everywhere objects, we see touchsensitive screens in many kinds of devices, such as smartphones, tablet computers and interactive tabletops. More advanced concepts of these have been an active research topic for many years. This has also influenced automotive cockpit development: concept cars and recent market releases show integrated touchscreens, growing in size. To meet the increasing information and interaction needs, interactive surfaces offer context-dependent functionality in combination with a direct input paradigm.
However, interfaces in the car need to be operable while driving. Distraction, especially visual distraction from the driving task, can lead to critical situations if the sum of attentional demand emerging from both primary and secondary task overextends the available resources. So far, a touchscreen requires a lot of visual attention since its flat surface does not provide any haptic feedback. There have been approaches to make direct touch interaction accessible while driving for simple tasks. Outside the automotive domain, for example in office environments, concepts for sophisticated handling of large displays have already been introduced. Moreover, technological advances lead to new characteristics for interactive surfaces by enabling arbitrary surface shapes.
In cars, two main characteristics for upcoming interactive surfaces are largeness and shape. On the one hand, spatial extension is not only increasing through larger displays, but also by taking objects in the surrounding into account for interaction. On the other hand, the flatness inherent in current screens can be overcome by upcoming technologies, and interactive surfaces can therefore provide haptically distinguishable surfaces. This thesis describes the systematic exploration of large and shaped interactive surfaces and analyzes their potential for interaction while driving. Therefore, different prototypes for each characteristic have been developed and evaluated in test settings suitable for their maturity level. Those prototypes were used to obtain subjective user feedback and objective data, to investigate effects on driving and glance behavior as well as usability and user experience.
As a contribution, this thesis provides an analysis of the development of interactive surfaces in the car. Two characteristics, largeness and shape, are identified that can improve the interaction compared to conventional touchscreens. The presented studies show that large interactive surfaces can provide new and improved ways of interaction both in driver-only and driver-passenger situations. Furthermore, studies indicate a positive effect on visual distraction when additional static haptic feedback is provided by shaped interactive surfaces. Overall, various, non-exclusively applicable, interaction concepts prove the potential of interactive surfaces for the use in automotive cockpits, which is expected to be beneficial also in further environments where visual attention needs to be focused on additional tasks.Der Einsatz von interaktiven OberflĂ€chen weitet sich mehr und mehr auf die unterschiedlichsten Lebensbereiche aus. Damit sind sie eine mögliche AusprĂ€gung von Mark Weisers Vision der allgegenwĂ€rtigen Computer, die aus unserer direkten Wahrnehmung verschwinden. Bei einer Vielzahl von technischen GerĂ€ten des tĂ€glichen Lebens, wie Smartphones, Tablets oder interaktiven Tischen, sind berĂŒhrungsempfindliche OberflĂ€chen bereits heute in Benutzung. Schon seit vielen Jahren arbeiten Forscher an einer Weiterentwicklung der Technik, um ihre Vorteile auch in anderen Bereichen, wie beispielsweise der Interaktion zwischen Mensch und Automobil, nutzbar zu machen. Und das mit Erfolg: Interaktive BenutzeroberflĂ€chen werden mittlerweile serienmĂ€Ăig in vielen Fahrzeugen eingesetzt. Der Einbau von immer gröĂeren, in das Cockpit integrierten Touchscreens in Konzeptfahrzeuge zeigt, dass sich diese Entwicklung weiter in vollem Gange befindet. Interaktive OberflĂ€chen ermöglichen das flexible Anzeigen von kontextsensitiven Inhalten und machen eine direkte Interaktion mit den Bildschirminhalten möglich. Auf diese Weise erfĂŒllen sie die sich wandelnden Informations- und InteraktionsbedĂŒrfnisse in besonderem MaĂe.
Beim Einsatz von Bedienschnittstellen im Fahrzeug ist die gefahrlose Benutzbarkeit wĂ€hrend der Fahrt von besonderer Bedeutung. Insbesondere visuelle Ablenkung von der Fahraufgabe kann zu kritischen Situationen fĂŒhren, wenn PrimĂ€r- und SekundĂ€raufgaben mehr als die insgesamt verfĂŒgbare Aufmerksamkeit des Fahrers beanspruchen. Herkömmliche Touchscreens stellen dem Fahrer bisher lediglich eine flache OberflĂ€che bereit, die keinerlei haptische RĂŒckmeldung bietet, weshalb deren Bedienung besonders viel visuelle Aufmerksamkeit erfordert. Verschiedene AnsĂ€tze ermöglichen dem Fahrer, direkte Touchinteraktion fĂŒr einfache Aufgaben wĂ€hrend der Fahrt zu nutzen. AuĂerhalb der Automobilindustrie, zum Beispiel fĂŒr BĂŒroarbeitsplĂ€tze, wurden bereits verschiedene Konzepte fĂŒr eine komplexere Bedienung groĂer Bildschirme vorgestellt. DarĂŒber hinaus fĂŒhrt der technologische Fortschritt zu neuen möglichen AusprĂ€gungen interaktiver OberflĂ€chen und erlaubt, diese beliebig zu formen.
FĂŒr die nĂ€chste Generation von interaktiven OberflĂ€chen im Fahrzeug wird vor allem an der Modifikation der Kategorien GröĂe und Form gearbeitet. Die Bedienschnittstelle wird nicht nur durch gröĂere Bildschirme erweitert, sondern auch dadurch, dass Objekte wie Dekorleisten in die Interaktion einbezogen werden können. Andererseits heben aktuelle Technologieentwicklungen die Restriktion auf flache OberflĂ€chen auf, so dass Touchscreens kĂŒnftig ertastbare Strukturen aufweisen können. Diese Dissertation beschreibt die systematische Untersuchung groĂer und nicht-flacher interaktiver OberflĂ€chen und analysiert ihr Potential fĂŒr die Interaktion wĂ€hrend der Fahrt. Dazu wurden fĂŒr jede Charakteristik verschiedene Prototypen entwickelt und in Testumgebungen entsprechend ihres Reifegrads evaluiert. Auf diese Weise konnten subjektives Nutzerfeedback und objektive Daten erhoben, und die Effekte auf Fahr- und Blickverhalten sowie Nutzbarkeit untersucht werden.
Diese Dissertation leistet den Beitrag einer Analyse der Entwicklung von interaktiven OberflĂ€chen im Automobilbereich. Weiterhin werden die Aspekte GröĂe und Form untersucht, um mit ihrer Hilfe die Interaktion im Vergleich zu herkömmlichen Touchscreens zu verbessern. Die durchgefĂŒhrten Studien belegen, dass groĂe FlĂ€chen neue und verbesserte Bedienmöglichkeiten bieten können. AuĂerdem zeigt sich ein positiver Effekt auf die visuelle Ablenkung, wenn zusĂ€tzliches statisches, haptisches Feedback durch nicht-flache OberflĂ€chen bereitgestellt wird. Zusammenfassend zeigen verschiedene, untereinander kombinierbare Interaktionskonzepte das Potential interaktiver OberflĂ€chen fĂŒr den automotiven Einsatz. Zudem können die Ergebnisse auch in anderen Bereichen Anwendung finden, in denen visuelle Aufmerksamkeit fĂŒr andere Aufgaben benötigt wird
Augmenting low-fidelity flight simulation training devices via amplified head rotations
Due to economic and operational constraints, there is an increasing demand from aviation operators and training manufacturers to extract maximum training usage from the lower fidelity suite of flight simulators. It is possible to augment low-fidelity flight simulators to achieve equivalent performance compared to high-fidelity setups but at reduced cost and greater mobility. In particular for visual manoeuvres, the virtual reality technique of head-tracking amplification for virtual view control enables full field-of-regard access even with limited field-of-view displays. This research quantified the effects of this technique on piloting performance, workload and simulator sickness by applying it to a fixed-base, low-fidelity, low-cost flight simulator. In two separate simulator trials, participants had to land a simulated aircraft from a visual traffic circuit pattern whilst scanning for airborne traffic.
Initially, a single augmented display was compared to the common triple display setup in front of the pilot. Starting from the base leg, pilots exhibited tighter turns closer to the desired ground track and were more actively conducting visual scans using the augmented display. This was followed up by a second experiment to quantify the scalability of augmentation towards larger displays and field of views. Task complexity was increased by starting the traffic pattern from the downwind leg. Triple displays in front of the pilot yielded the best compromise delivering flight performance and traffic detection scores just below the triple projectors but without an increase in track deviations and the pilots were also less prone to simulator sickness symptoms.
This research demonstrated that head augmentation yields clear benefits of quick user adaptation, low-cost, ease of systems integration, together with the capability to negate the impact of display sizes yet without incurring significant penalties in workload and incurring simulator sickness. The impact of this research is that it facilitates future flight training solutions using this augmentation technique to meet budgetary and mobility requirements. This enables deployment of simulators in large numbers to deliver expanded mission rehearsal previously unattainable within this class of low-fidelity simulators, and with no restrictions for transfer to other training media
Haptics: Science, Technology, Applications
This open access book constitutes the proceedings of the 12th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2020, held in Leiden, The Netherlands, in September 2020. The 60 papers presented in this volume were carefully reviewed and selected from 111 submissions. The were organized in topical sections on haptic science, haptic technology, and haptic applications. This year's focus is on accessibility
Proceedings of the 9th international conference on disability, virtual reality and associated technologies (ICDVRAT 2012)
The proceedings of the conferenc
Change blindness: eradication of gestalt strategies
Arrays of eight, texture-defined rectangles were used as stimuli in a one-shot change blindness (CB) task where there was a 50% chance that one rectangle would change orientation between two successive presentations separated by an interval. CB was eliminated by cueing the target rectangle in the first stimulus, reduced by cueing in the interval and unaffected by cueing in the second presentation. This supports the idea that a representation was formed that persisted through the interval before being 'overwritten' by the second presentation (Landman et al, 2003 Vision Research 43149â164]. Another possibility is that participants used some kind of grouping or Gestalt strategy. To test this we changed the spatial position of the rectangles in the second presentation by shifting them along imaginary spokes (by ±1 degree) emanating from the central fixation point. There was no significant difference seen in performance between this and the standard task [F(1,4)=2.565, p=0.185]. This may suggest two things: (i) Gestalt grouping is not used as a strategy in these tasks, and (ii) it gives further weight to the argument that objects may be stored and retrieved from a pre-attentional store during this task
Drones, Signals, and the Techno-Colonisation of Landscape
This research project is a cross-disciplinary, creative practice-led investigation that interrogates increasing military interest in the electromagnetic spectrum (EMS). The projectâs central argument is that painted visualisations of normally invisible aspects of contemporary EMS-enabled warfare can reveal useful, novel, and speculative but informed perspectives that contribute to debates about war and technology. It pays particular attention to how visualising normally invisible signals reveals an insidious techno-colonisation of our extended environment from Earth to orbiting satellites
Fourth Annual Workshop on Space Operations Applications and Research (SOAR 90)
The papers from the symposium are presented. Emphasis is placed on human factors engineering and space environment interactions. The technical areas covered in the human factors section include: satellite monitoring and control, man-computer interfaces, expert systems, AI/robotics interfaces, crew system dynamics, and display devices. The space environment interactions section presents the following topics: space plasma interaction, spacecraft contamination, space debris, and atomic oxygen interaction with materials. Some of the above topics are discussed in relation to the space station and space shuttle
Recommended from our members
EVA London 2022: Electronic Visualisation and the Arts
The Electronic Visualisation and the Arts London 2022 Conference (EVA London 2022) is co-sponsored by the Computer Arts Society (CAS) and BCS, the Chartered Institute for IT, of which the CAS is a Specialist Group. Of course, this has been a difficult time for all conferences, with the Covid-19 pandemic. For the first time since 2019, the EVA London 2022 Conference is a physical conference. It is also an online conference, as it was in the previous two years. We continue with publishing the proceedings, both online, with open access via ScienceOpen, and also in our traditional printed form, for the second year in full colour. Over recent decades, the EVA London Conference on Electronic Visualisation and the Arts has established itself as one of the United Kingdomâs most innovative and interdisciplinary conferences. It brings together a wide range of research domains to celebrate a diverse set of interests, with a specialised focus on visualisation. The long and short papers in this volume cover varied topics concerning the arts, visualisations, and IT, including 3D graphics, animation, artificial intelligence, creativity, culture, design, digital art, ethics, heritage, literature, museums, music, philosophy, politics, publishing, social media, and virtual reality, as well as other related interdisciplinary areas.
The EVA London 2022 proceedings presents a wide spectrum of papers, demonstrations, Research Workshop contributions, other workshops, and for the seventh year, the EVA London Symposium, in the form of an opening morning session, with three invited contributors. The conference includes a number of other associated evening events including ones organised by the Computer Arts Society, Art in Flux, and EVA International. As in previous years, there are Research Workshop contributions in this volume, aimed at encouraging participation by postgraduate students and early-career artists, accepted either through the peer-review process or directly by the Research Workshop chair. The Research Workshop contributors are offered bursaries to aid participation. In particular, EVA London liaises with Art in Flux, a London-based group of digital artists. The EVA London 2022 proceedings includes long papers and short âposterâ papers from international researchers inside and outside academia, from graduate artists, PhD students, industry professionals, established scholars, and senior researchers, who value EVA London for its interdisciplinary community. The conference also features keynote talks. A special feature this year is support for Ukrainian culture after its invasion earlier in the year. This publication has resulted from a selective peer review process, fitting as many excellent submissions as possible into the proceedings.
This year, submission numbers were lower than previous years, mostly likely due to the pandemic and a new requirement to submit drafts of long papers for review as well as abstracts. It is still pleasing to have so many good proposals from which to select the papers that have been included. EVA London is part of a larger network of EVA international conferences. EVA events have been held in Athens, Beijing, Berlin, Brussels, California, Cambridge (both UK and USA), Canberra, Copenhagen, Dallas, Delhi, Edinburgh, Florence, Gifu (Japan), Glasgow, Harvard, Jerusalem, Kiev, Laval, London, Madrid, Montreal, Moscow, New York, Paris, Prague, St Petersburg, Thessaloniki, and Warsaw. Further venues for EVA conferences are very much encouraged by the EVA community. As noted earlier, this volume is a record of accepted submissions to EVA London 2022. Associated online presentations are in general recorded and made available online after the conference