A Survey on Scheduling in IEEE 802.16 Mesh Mode

Cataloged from PDF version of article.IEEE 802.16 standard (also known as WiMAX) defines the wireless broadband network technology which aims to solve the so called last mile problem via providing high bandwidth Internet even to the rural areas for which the cable deployment is very costly. The standard mainly focuses on the MAC and PHY layer issues, supporting two transmission modes: PMP (Point-to-Multipoint) and mesh modes. Mesh mode is an optional mode developed as an extension to PMP mode and it has the advantage of having an improving performance as more subscribers are added to the system using multi-hop routes. In 802.16 MAC protocol, mesh mode slot allocation and reservation mechanisms are left open which makes this topic a hot research area. Hence, the focus of this survey will mostly be on the mesh mode, and the proposed scheduling algorithms and performance evaluation methods

Interconnects architectures for many-core era using surface-wave communication

PhD ThesisNetworks-on-chip (NoCs) is a communication paradigm that has emerged aiming to address on-chip communication challenges and to satisfy interconnection demands for chip-multiprocessors (CMPs). Nonetheless, there is continuous demand for even higher computational power, which is leading to a relentless downscaling of CMOS technology to enable the integration of many-cores. However, technology downscaling is in favour of the gate nodes over wires in terms of latency and power consumption. Consequently, this has led to the era of many-core processors where power consumption and performance are governed by inter-core communications rather than core computation. Therefore, NoCs need to evolve from being merely metalbased implementations which threaten to be a performance and power bottleneck for many-core efficiency and scalability. To overcome such intensified inter-core communication challenges, this thesis proposes a novel interconnect technology: the surface-wave interconnect (SWI). This new RF-based on-chip interconnect has notable characteristics compared to cutting-edge on-chip interconnects in terms of CMOS compatibility, high speed signal propagation, low power dissipation, and massive signal fan-out. Nonetheless, the realization of the SWI requires investigations at different levels of abstraction, such as the device integration and RF engineering levels. The aim of this thesis is to address the networking and system level challenges and highlight the potential of this interconnect. This should encourage further research at other levels of abstraction. Two specific system-level challenges crucial in future many-core systems are tackled in this study, which are cross-the-chip global communication and one-to-many communication. This thesis makes four major contributions towards this aim. The first is reducing the NoC average-hop count, which would otherwise increase packet-latency exponentially, by proposing a novel hybrid interconnect architecture. This hybrid architecture can not only utilize both regular metal-wire and SWI, but also exploits merits of both bus and NoC architectures in terms of connectivity compared to other general-purpose on-chip interconnect architectures. The second contribution addresses global communication issues by developing a distance-based weighted-round-robin arbitration (DWA) algorithm. This technique prioritizes global communication to be send via SWI short-cuts, which offer more efficient power dissipation and faster across-the-chip signal propagation. Results obtained using a cycleaccurate simulator demonstrate the effectiveness of the proposed system architecture in terms of significant power reduction, considervii able average delay reduction and higher throughput compared to a regular NoC. The third contribution is in handling multicast communications, which are normally associated with traffic overload, hotspots and deadlocks and therefore increase, by an order of magnitude the power consumption and latency. This has been achieved by proposing a novel routing and centralized arbitration schemes that exploits the SWI0s remarkable fan-out features. The evaluation demonstrates drastic improvements in the effectiveness of the proposed architecture in terms of power consumption ( 2-10x) and performance ( 22x) but with negligible hardware overheads ( 2%). The fourth contribution is to further explore multicast contention handling in a flexible decentralized manner, where original techniques such as stretch-multicast and ID-tagging flow control have been developed. A comparison of these techniques shows that the decentralized approach is superior to the centralized approach with low traffic loads, while the latter outperforms the former near and after NoC saturation

On Multicast in Asynchronous Networks-on-Chip: Techniques, Architectures, and FPGA Implementation

In this era of exascale computing, conventional synchronous design techniques are facing unprecedented challenges. The consumer electronics market is replete with many-core systems in the range of 16 cores to thousands of cores on chip, integrating multi-billion transistors. However, with this ever increasing complexity, the traditional design approaches are facing key issues such as increasing chip power, process variability, aging, thermal problems, and scalability. An alternative paradigm that has gained significant interest in the last decade is asynchronous design. Asynchronous designs have several potential advantages: they are naturally energy proportional, burning power only when active, do not require complex clock distribution, are robust to different forms of variability, and provide ease of composability for heterogeneous platforms. Networks-on-chip (NoCs) is an interconnect paradigm that has been introduced to deal with the ever-increasing system complexity. NoCs provide a distributed, scalable, and efficient interconnect solution for today’s many-core systems. Moreover, NoCs are a natural match with asynchronous design techniques, as they separate communication infrastructure and timing from the computational elements. To this end, globally-asynchronous locally-synchronous (GALS) systems that interconnect multiple processing cores, operating at different clock speeds, using an asynchronous NoC, have gained significant interest. While asynchronous NoCs have several advantages, they also face a key challenge of supporting new types of traffic patterns. Once such pattern is multicast communication, where a source sends packets to arbitrary number of destinations. Multicast is not only common in parallel computing, such as for cache coherency, but also for emerging areas such as neuromorphic computing. This important capability has been largely missing from asynchronous NoCs. This thesis introduces several efficient multicast solutions for these interconnects. In particular, techniques, and network architectures are introduced to support high-performance and low-power multicast. Two leading network topologies are the focus: a variant mesh-of-trees (MoT) and a 2D mesh. In addition, for a more realistic implementation and analysis, as well as significantly advancing the field of asynchronous NoCs, this thesis also targets synthesis of these NoCs on commercial FPGAs. While there has been significant advances in FPGA technologies, there has been only limited research on implementing asynchronous NoCs on FPGAs. To this end, a systematic computeraided design (CAD) methodology has been introduced to efficiently and safely map asynchronous NoCs on FPGAs. Overall, this thesis makes the following three contributions. The first contribution is a multicast solution for a variant MoT network topology. This topology consists of simple low-radix switches, and has been used in high-performance computing platforms. A novel local speculation technique is introduced, where a subset of the network’s switches are speculative that always broadcast every packet. These switches are very simple and have high performance. Speculative switches are surrounded by non-speculative ones that route packets based on their destinations and also throttle any redundant copies created by the former. This hybrid network architecture achieved significant performance and power benefits over other multicast approaches. The second contribution is a multicast solution for a 2D-mesh topology, which is more complex with higher-radix switches and also is more commonly used. A novel continuous-time replication strategy is introduced to optimize the critical multi-way forking operation of a multicast transmission. In this technique, a multicast packet is first stored in an input port of a switch, from where it is sent through distinct output ports towards different destinations concurrently, at each output’s own rate and in continuous time. This strategy is shown to have significant latency and energy benefits over an approach that performs multicast using multiple distinct serial unicasts to each destination. Finally, a systematic CAD methodology is introduced to synthesize asynchronous NoCs on commercial FPGAs. A two-fold goal is targeted: correctness and high performance. For ease of implementation, only existing FPGA synthesis tools are used. Moreover, since asynchronous NoCs involve special asynchronous components, a comprehensive guide is introduced to map these elements correctly and efficiently. Two asynchronous NoC switches are synthesized using the proposed approach on a leading Xilinx FPGA in 28 nm: one that only handles unicast, and the other that also supports multicast. Both showed significant energy benefits with some performance gains over a state-of-the-art synchronous switch

S3N - Smart Solution for Substation Networks, an architecture for the management of communication networks in power substations

ABSTRACT: Today, the communications network has become an essential element to the operation of any type of organization or infrastructure, such is the case of the electrical power substations. Such networks in particular, demand high levels of availability and reliability, as the substation is a key element in the chain of energy generation and distribution. However, although recent network modernization introduced new features that allow optimizing the operation of the substation, the variety of devices present in such environment (Intelligent Electronic Devices (IEDs), Merging Units (MUs), Network Switches, IEEE 1588 Master Clock) and the huge set of application-level protocols (Sampled Measured Values (SV), Generic Object Oriented Substation Event (GOOSE), Manufacturing Message Specification protocol (MMS), Precision Time Protocol (PTP), among others), increase the management complexity. Nevertheless, in recent years, data networks have been permeated by two major trends aiming to facilitate the administration of complex networks: Software Defined Networking (SDN) and virtualizationtechnologies, which make the network management more flexible and enable the rapid development and deployment of network services. This thesis proposes a set of contributions to solve the research challenges around of the current operation of a power substation communication network that have not been tackled by the research community. To do that, it performs a comprehensive review of the appropriation of SDN as an enabler in the management and operation of the power substations communication networks. The first research challenge we identified in this work is that, to the best of our knowledge, there are not research works proposing a complete architecture for the management of the communications networks of the power substation; also existing works do not introduce the virtualization technologies as an enabler in this environment. They only present how the application of SDN concepts may improve the performance of different communication tasks in power substations. This thesis introduces a novel architecture called Smart Solution for Substation Networks (S3N), which presents a different way to represent the interaction among all elements involved in the operation of the power substation, taking the communications network as the central point and the SDN paradigm as a key element of its formulation. The second challenge found in this work is that there is no unique criterion to define the structure of the network topology since, in every power substation, the end user implements their own topologies or the topology suggested by a vendor. In this context, this thesis presents a methodology to specify and characterize a reliable topology that vii guarantees fault-tolerance, according to the guidelines described in the architecture S3N. In addition, this thesis presents alternative SDN solutions for loops-based topologies in the proposed network topology which would be technically unfeasible using common network protocols. These solutions include algorithms to solve problems related to the broadcast and multicast traffic management. Also, we discovered that, although the communication networks of modern electrical substations provide major benefits, various research articles have evidenced several vulnerabilities related to the operation protocols in this critical infrastructure. This thesis, in order to improve the security, presents two strategies to detect intrusions and one SDN approach to mitigate attacks in the reconnaissance phase. Finally, all these contributions would not be enough to guarantee a reliable operation without mechanisms to bring traffic differentiation and provisioning. This thesis makes the best out of the architecture proposed to deploy Quality of Service (QoS) inside power substation communication networks, under the SDN paradigm

Ordering, timeliness and reliability for publish/subscribe systems over WAN

In the last few years, the increasing use of the Internet and geo-political, sociological and financial changes induced by globalization, are paving the way for a connected world where the information is always available at the right place and the right time. As such, applications previously deployed for ``closed'' environmets, are now federating into geographically distributed systems connected through a Wide Area Network (WAN). By this evolution, in the near future no system will be isolated: every system will be composed by interconnected systems, i.e., it will be a System of Systems (SoS). Example of SoS are the Large-scale Complex Critical Infrastructure (LCCIs), such as power grids, transport infrastructures (airports and seaports), financial infrastructures, next generation intelligence platforms, to cite a few. In these systems, multiple sources of information generate a high volume of events that need to be delivered to all intended destinations by respecting several Quality of Service (QoS) constraints imposed by the critical nature of LCCIs. As such, particular attention is devoted to the middleware solution used to disseminate information in the SoS. Due to its inherently scalability provided by space, time and synchronization decoupling properties, the publish/subscribe paradigm is becoming attractive for the implementation of a middleware service for LCCIs. However, scalability is not the only requirement exhibited by SoS. Several services need to control a broader set of QoS requirements, such as timeliness, ordering and reliability. Unfortunately, current middleware solutions do not address QoS constraints required by SoS. Current publish/subscribe middleware solutions for the WAN environment offer only a best effort event dissemination, with no additional control on QoS. Just a few implementations try to address some isolated QoS policy, making them not suitable for a SoS scenario. The contribution of this thesis is to devise a QoS layer that can be posed on top of a generic publish/subscribe middleware that enriches its service by addressing: (i) ordering, (ii) reliability and (iii) timeliness in event dissemination in SoS over WAN. Specifically, we first analyze several real case studies, by highlighting their QoS requirements in terms of ordering, reliability and timeliness, and compare these requirements with both current research prototypes and commercial systems. Then, we fill the gap by proposing novel algorithms to address those requirements. The proposed protocols can also be combined together in order to provide the QoS level required by the particular application. In this way, QoS issues do not need to be addressed at application level, so as to leave applications to implement just their native functionalities

Ordering, timeliness and reliability for publish/subscribe systems over WAN

In the last few years, the increasing use of the Internet and geo-political, sociological and financial changes induced by globalization, are paving the way for a connected world where the information is always available at the right place and the right time. As such, applications previously deployed for ``closed'' environmets, are now federating into geographically distributed systems connected through a Wide Area Network (WAN). By this evolution, in the near future no system will be isolated: every system will be composed by interconnected systems, i.e., it will be a System of Systems (SoS). Example of SoS are the Large-scale Complex Critical Infrastructure (LCCIs), such as power grids, transport infrastructures (airports and seaports), financial infrastructures, next generation intelligence platforms, to cite a few. In these systems, multiple sources of information generate a high volume of events that need to be delivered to all intended destinations by respecting several Quality of Service (QoS) constraints imposed by the critical nature of LCCIs. As such, particular attention is devoted to the middleware solution used to disseminate information in the SoS. Due to its inherently scalability provided by space, time and synchronization decoupling properties, the publish/subscribe paradigm is becoming attractive for the implementation of a middleware service for LCCIs. However, scalability is not the only requirement exhibited by SoS. Several services need to control a broader set of QoS requirements, such as timeliness, ordering and reliability. Unfortunately, current middleware solutions do not address QoS constraints required by SoS. Current publish/subscribe middleware solutions for the WAN environment offer only a best effort event dissemination, with no additional control on QoS. Just a few implementations try to address some isolated QoS policy, making them not suitable for a SoS scenario. The contribution of this thesis is to devise a QoS layer that can be posed on top of a generic publish/subscribe middleware that enriches its service by addressing: (i) ordering, (ii) reliability and (iii) timeliness in event dissemination in SoS over WAN. Specifically, we first analyze several real case studies, by highlighting their QoS requirements in terms of ordering, reliability and timeliness, and compare these requirements with both current research prototypes and commercial systems. Then, we fill the gap by proposing novel algorithms to address those requirements. The proposed protocols can also be combined together in order to provide the QoS level required by the particular application. In this way, QoS issues do not need to be addressed at application level, so as to leave applications to implement just their native functionalities