3,107 research outputs found
Resource-aware scheduling for 2D/3D multi-/many-core processor-memory systems
This dissertation addresses the complexities of 2D/3D multi-/many-core processor-memory systems, focusing on two key areas: enhancing timing predictability in real-time multi-core processors and optimizing performance within thermal constraints. The integration of an increasing number of transistors into compact chip designs, while boosting computational capacity, presents challenges in resource contention and thermal management. The first part of the thesis improves timing predictability. We enhance shared cache interference analysis for set-associative caches, advancing the calculation of Worst-Case Execution Time (WCET). This development enables accurate assessment of cache interference and the effectiveness of partitioned schedulers in real-world scenarios. We introduce TCPS, a novel task and cache-aware partitioned scheduler that optimizes cache partitioning based on task-specific WCET sensitivity, leading to improved schedulability and predictability. Our research explores various cache and scheduling configurations, providing insights into their performance trade-offs. The second part focuses on thermal management in 2D/3D many-core systems. Recognizing the limitations of Dynamic Voltage and Frequency Scaling (DVFS) in S-NUCA many-core processors, we propose synchronous thread migrations as a thermal management strategy. This approach culminates in the HotPotato scheduler, which balances performance and thermal safety. We also introduce 3D-TTP, a transient temperature-aware power budgeting strategy for 3D-stacked systems, reducing the need for Dynamic Thermal Management (DTM) activation. Finally, we present 3QUTM, a novel method for 3D-stacked systems that combines core DVFS and memory bank Low Power Modes with a learning algorithm, optimizing response times within thermal limits. This research contributes significantly to enhancing performance and thermal management in advanced processor-memory systems
Computational and experimental studies on the reaction mechanism of bio-oil components with additives for increased stability and fuel quality
As one of the world’s largest palm oil producers, Malaysia encountered a major disposal problem as vast amount of oil palm biomass wastes are produced. To overcome this problem, these biomass wastes can be liquefied into biofuel with fast pyrolysis technology. However, further upgradation of fast pyrolysis bio-oil via direct solvent addition was required to overcome it’s undesirable attributes. In addition, the high production cost of biofuels often hinders its commercialisation. Thus, the designed solvent-oil blend needs to achieve both fuel functionality and economic targets to be competitive with the conventional diesel fuel.
In this thesis, a multi-stage computer-aided molecular design (CAMD) framework was employed for bio-oil solvent design. In the design problem, molecular signature descriptors were applied to accommodate different classes of property prediction models. However, the complexity of the CAMD problem increases as the height of signature increases due to the combinatorial nature of higher order signature. Thus, a consistency rule was developed reduce the size of the CAMD problem. The CAMD problem was then further extended to address the economic aspects via fuzzy multi-objective optimisation approach.
Next, a rough-set based machine learning (RSML) model has been proposed to correlate the feedstock characterisation and pyrolysis condition with the pyrolysis bio-oil properties by generating decision rules. The generated decision rules were analysed from a scientific standpoint to identify the underlying patterns, while ensuring the rules were logical. The decision rules generated can be used to select optimal feedstock composition and pyrolysis condition to produce pyrolysis bio-oil of targeted fuel properties.
Next, the results obtained from the computational approaches were verified through experimental study. The generated pyrolysis bio-oils were blended with the identified solvents at various mixing ratio. In addition, emulsification of the solvent-oil blend in diesel was also conducted with the help of surfactants. Lastly, potential extensions and prospective work for this study have been discuss in the later part of this thesis. To conclude, this thesis presented the combination of computational and experimental approaches in upgrading the fuel properties of pyrolysis bio-oil. As a result, high quality biofuel can be generated as a cleaner burning replacement for conventional diesel fuel
Digitalization and Development
This book examines the diffusion of digitalization and Industry 4.0 technologies in Malaysia by focusing on the ecosystem critical for its expansion. The chapters examine the digital proliferation in major sectors of agriculture, manufacturing, e-commerce and services, as well as the intermediary organizations essential for the orderly performance of socioeconomic agents.
The book incisively reviews policy instruments critical for the effective and orderly development of the embedding organizations, and the regulatory framework needed to quicken the appropriation of socioeconomic synergies from digitalization and Industry 4.0 technologies. It highlights the importance of collaboration between government, academic and industry partners, as well as makes key recommendations on how to encourage adoption of IR4.0 technologies in the short- and long-term.
This book bridges the concepts and applications of digitalization and Industry 4.0 and will be a must-read for policy makers seeking to quicken the adoption of its technologies
Crystal Structures of Metal Complexes
This reprint contains 11 papers published in a Special Issue of Molecules entitled "Crystal Structures of Metal Complexes". I will be very happy if readers will be interested in the crystal structures of metal complexes
The 2023 terahertz science and technology roadmap
Terahertz (THz) radiation encompasses a wide spectral range within the electromagnetic spectrum that extends from microwaves to the far infrared (100 GHz–∼30 THz). Within its frequency boundaries exist a broad variety of scientific disciplines that have presented, and continue to present, technical challenges to researchers. During the past 50 years, for instance, the demands of the scientific community have substantially evolved and with a need for advanced instrumentation to support radio astronomy, Earth observation, weather forecasting, security imaging, telecommunications, non-destructive device testing and much more. Furthermore, applications have required an emergence of technology from the laboratory environment to production-scale supply and in-the-field deployments ranging from harsh ground-based locations to deep space. In addressing these requirements, the research and development community has advanced related technology and bridged the transition between electronics and photonics that high frequency operation demands. The multidisciplinary nature of THz work was our stimulus for creating the 2017 THz Science and Technology Roadmap (Dhillon et al 2017 J. Phys. D: Appl. Phys. 50 043001). As one might envisage, though, there remains much to explore both scientifically and technically and the field has continued to develop and expand rapidly. It is timely, therefore, to revise our previous roadmap and in this 2023 version we both provide an update on key developments in established technical areas that have important scientific and public benefit, and highlight new and emerging areas that show particular promise. The developments that we describe thus span from fundamental scientific research, such as THz astronomy and the emergent area of THz quantum optics, to highly applied and commercially and societally impactful subjects that include 6G THz communications, medical imaging, and climate monitoring and prediction. Our Roadmap vision draws upon the expertise and perspective of multiple international specialists that together provide an overview of past developments and the likely challenges facing the field of THz science and technology in future decades. The document is written in a form that is accessible to policy makers who wish to gain an overview of the current state of the THz art, and for the non-specialist and curious who wish to understand available technology and challenges. A such, our experts deliver a 'snapshot' introduction to the current status of the field and provide suggestions for exciting future technical development directions. Ultimately, we intend the Roadmap to portray the advantages and benefits of the THz domain and to stimulate further exploration of the field in support of scientific research and commercial realisation
A BIM - GIS Integrated Information Model Using Semantic Web and RDF Graph Databases
In recent years, 3D virtual indoor and outdoor urban modelling has become an essential geospatial information framework for civil and engineering applications such as emergency response, evacuation planning, and facility management. Building multi-sourced and multi-scale 3D urban models are in high demand among architects, engineers, and construction professionals to achieve these tasks and provide relevant information to decision support systems. Spatial modelling technologies such as Building Information Modelling (BIM) and Geographical Information Systems (GIS) are frequently used to meet such high demands. However, sharing data and information between these two domains is still challenging. At the same time, the semantic or syntactic strategies for inter-communication between BIM and GIS do not fully provide rich semantic and geometric information exchange of BIM into GIS or vice-versa. This research study proposes a novel approach for integrating BIM and GIS using semantic web technologies and Resources Description Framework (RDF) graph databases. The suggested solution's originality and novelty come from combining the advantages of integrating BIM and GIS models into a semantically unified data model using a semantic framework and ontology engineering approaches. The new model will be named Integrated Geospatial Information Model (IGIM). It is constructed through three stages. The first stage requires BIMRDF and GISRDF graphs generation from BIM and GIS datasets. Then graph integration from BIM and GIS semantic models creates IGIMRDF. Lastly, the information from IGIMRDF unified graph is filtered using a graph query language and graph data analytics tools. The linkage between BIMRDF and GISRDF is completed through SPARQL endpoints defined by queries using elements and entity classes with similar or complementary information from properties, relationships, and geometries from an ontology-matching process during model construction. The resulting model (or sub-model) can be managed in a graph database system and used in the backend as a data-tier serving web services feeding a front-tier domain-oriented application. A case study was designed, developed, and tested using the semantic integrated information model for validating the newly proposed solution, architecture, and performance
- …