Investigation of the tolerance of wavelength-routed optical networks to traffic load variations.

This thesis focuses on the performance of circuit-switched wavelength-routed optical network with unpredictable traffic pattern variations. This characteristic of optical networks is termed traffic forecast tolerance. First, the increasing volume and heterogeneous nature of data and voice traffic is discussed. The challenges in designing robust optical networks to handle unpredictable traffic statistics are described. Other work relating to the same research issues are discussed. A general methodology to quantify the traffic forecast tolerance of optical networks is presented. A traffic model is proposed to simulate dynamic, non-uniform loads, and used to test wavelength-routed optical networks considering numerous network topologies. The number of wavelengths required and the effect of the routing and wavelength allocation algorithm are investigated. A new method of quantifying the network tolerance is proposed, based on the calculation of the increase in the standard deviation of the blocking probabilities with increasing traffic load non-uniformity. The performance of different networks are calculated and compared. The relationship between physical features of the network topology and traffic forecast tolerance is investigated. A large number of randomly connected networks with different sizes were assessed. It is shown that the average lightpath length and the number of wavelengths required for full interconnection of the nodes in static operation both exhibit a strong correlation with the network tolerance, regardless of the degree of load non-uniformity. Finally, the impact of wavelength conversion on network tolerance is investigated. Wavelength conversion significantly increases the robustness of optical networks to unpredictable traffic variations. In particular, two sparse wavelength conversion schemes are compared and discussed: distributed wavelength conversion and localized wavelength conversion. It is found that the distributed wavelength conversion scheme outperforms localized wavelength conversion scheme, both with uniform loading and in terms of the network tolerance. The results described in this thesis can be used for the analysis and design of reliable WDM optical networks that are robust to future traffic demand variations

Cascaded clocks measurement and simulation findings

This paper will examine aspects related to network synchronization distribution and the cascading of timing elements. Methods of timing distribution have become a much debated topic in standards forums and among network service providers (both domestically and internationally). Essentially these concerns focus on the need to migrate their existing network synchronization plans (and capabilities) to those required for the next generation of transport technologies (namely, the Synchronous Digital Hierarchy (SDH), Synchronous Optical Networks (SONET), and Asynchronous Transfer Mode (ATM). The particular choices for synchronization distribution network architectures are now being evaluated and are demonstrating that they can indeed have a profound effect on the overall service performance levels that will be delivered to the customer. The salient aspects of these concerns reduce to the following: (1) identifying that the devil is in the details of the timing element specifications and the distribution of timing information (i.e., small design choices can have a large performance impact); (2) developing a standardized method of performance verification that will yield unambiguous results; and (3) presentation of those results. Specifically, this will be done for two general cases: an ideal input, and a noisy input to a cascaded chain of slave clocks

Design and implementation of a fault-tolerant multimedia network and a local map based (LMB) self-healing scheme for arbitrary topology networks.

by Arion Ko Kin Wa.Thesis (M.Phil.)--Chinese University of Hong Kong, 1997.Includes bibliographical references (leaves 101-[106]).Chapter 1 --- Introduction --- p.1Chapter 1.1 --- Overview --- p.1Chapter 1.2 --- Service Survivability Planning --- p.2Chapter 1.3 --- Categories of Outages --- p.3Chapter 1.4 --- Goals of Restoration --- p.4Chapter 1.5 --- Technology Impacts on Network Survivability --- p.5Chapter 1.6 --- Performance Models and Measures in Quantifying Network Sur- vivability --- p.6Chapter 1.7 --- Organization of Thesis --- p.6Chapter 2 --- Design and Implementation of A Survivable High-Speed Mul- timedia Network --- p.8Chapter 2.1 --- An Overview of CUM LAUDE NET --- p.8Chapter 2.2 --- The Network Architecture --- p.9Chapter 2.2.1 --- Architectural Overview --- p.9Chapter 2.2.2 --- Router-Node Design --- p.11Chapter 2.2.3 --- Buffer Allocation --- p.12Chapter 2.2.4 --- Buffer Transmission Priority --- p.14Chapter 2.2.5 --- Congestion Control --- p.15Chapter 2.3 --- Protocols --- p.16Chapter 2.3.1 --- Design Overview --- p.16Chapter 2.3.2 --- ACTA - The MAC Protocol --- p.17Chapter 2.3.3 --- Protocol Layering --- p.18Chapter 2.3.4 --- "Segment, Datagram and Packet Format" --- p.20Chapter 2.3.5 --- Fast Packet Routing --- p.22Chapter 2.3.6 --- Local Host NIU --- p.24Chapter 2.4 --- The Network Restoration Strategy --- p.25Chapter 2.4.1 --- The Dual-Ring Model and Assumptions --- p.26Chapter 2.4.2 --- Scenarios of Network Failure and Remedies --- p.26Chapter 2.4.3 --- Distributed Fault-Tolerant Algorithm --- p.26Chapter 2.4.4 --- Distributed Auto-Healing Algorithm --- p.28Chapter 2.4.5 --- The Network Management Signals --- p.31Chapter 2.5 --- Performance Evaluation --- p.32Chapter 2.5.1 --- Restoration Time --- p.32Chapter 2.5.2 --- Reliability Measures --- p.34Chapter 2.5.3 --- Network Availability During Restoration --- p.41Chapter 2.6 --- The Prototype --- p.42Chapter 2.7 --- Technical Problems Encountered --- p.45Chapter 2.8 --- Chapter Summary and Future Development --- p.46Chapter 3 --- A Simple Experimental Network Management Software - NET- MAN --- p.48Chapter 3.1 --- Introduction to NETMAN --- p.48Chapter 3.2 --- Network Management Basics --- p.49Chapter 3.2.1 --- The Level of Management Protocols --- p.49Chapter 3.2.2 --- Architecture Model --- p.51Chapter 3.2.3 --- TCP/IP Network Management Protocol Architecture --- p.53Chapter 3.2.4 --- A Standard Network Management Protocol On Internet - SNMP --- p.54Chapter 3.2.5 --- A Standard For Managed Information --- p.55Chapter 3.3 --- The CUM LAUDE Network Management Protocol Suite (CNMPS) --- p.56Chapter 3.3.1 --- The Architecture --- p.53Chapter 3.3.2 --- Goals of the CNMPS --- p.59Chapter 3.4 --- Highlights of NETMAN --- p.61Chapter 3.5 --- Functional Descriptions of NETMAN --- p.63Chapter 3.5.1 --- Topology Menu --- p.64Chapter 3.5.2 --- Fault Manager Menu --- p.65Chapter 3.5.3 --- Performance Meter Menu --- p.65Chapter 3.5.4 --- Gateway Utility Menu --- p.67Chapter 3.5.5 --- Tools Menu --- p.67Chapter 3.5.6 --- Help Menu --- p.68Chapter 3.6 --- Chapter Summary --- p.68Chapter 4 --- A Local Map Based (LMB) Self-Healing Scheme for Arbitrary Topology Networks --- p.70Chapter 4.1 --- Introduction --- p.79Chapter 4.2 --- An Overview of Existing DCS-Based Restoration Algorithms --- p.72Chapter 4.3 --- The Network Model and Assumptions --- p.74Chapter 4.4 --- Basics of the LMB Scheme --- p.75Chapter 4.4.1 --- Restoration Concepts --- p.75Chapter 4.4.2 --- Terminology --- p.76Chapter 4.4.3 --- Algorithm Parameters --- p.77Chapter 4.5 --- Performance Assessments --- p.78Chapter 4.6 --- The LMB Network Restoration Scheme --- p.80Chapter 4.6.1 --- Initialization - Local Map Building --- p.80Chapter 4.6.2 --- The LMB Restoration Messages Set --- p.81Chapter 4.6.3 --- Phase I - Local Map Update Phase --- p.81Chapter 4.6.4 --- Phase II - Update Acknowledgment Phase --- p.82Chapter 4.6.5 --- Phase III - Restoration and Confirmation Phase --- p.83Chapter 4.6.6 --- Phase IV - Cancellation Phase --- p.83Chapter 4.6.7 --- Re-Initialization --- p.84Chapter 4.6.8 --- Path Route Monitoring --- p.84Chapter 4.7 --- Performance Evaluation --- p.84Chapter 4.7.1 --- The Testbeds --- p.84Chapter 4.7.2 --- Simulation Results --- p.86Chapter 4.7.3 --- Storage Requirements --- p.89Chapter 4.8 --- The LMB Scheme on ATM and SONET environment --- p.92Chapter 4.9 --- Future Work --- p.94Chapter 4.10 --- Chapter Summary --- p.94Chapter 5 --- Conclusion and Future Work --- p.96Chapter 5.1 --- Conclusion --- p.95Chapter 5.2 --- Future Work --- p.99Bibliography --- p.101Chapter A --- Derivation of Communicative Probability --- p.107Chapter B --- List of Publications --- p.11

IP and ATM integration: A New paradigm in multi-service internetworking

ATM is a widespread technology adopted by many to support advanced data communication, in particular efficient Internet services provision. The expected challenges of multimedia communication together with the increasing massive utilization of IP-based applications urgently require redesign of networking solutions in terms of both new functionalities and enhanced performance. However, the networking context is affected by so many changes, and to some extent chaotic growth, that any approach based on a structured and complex top-down architecture is unlikely to be applicable. Instead, an approach based on finding out the best match between realistic service requirements and the pragmatic, intelligent use of technical opportunities made available by the product market seems more appropriate. By following this approach, innovations and improvements can be introduced at different times, not necessarily complying with each other according to a coherent overall design. With the aim of pursuing feasible innovations in the different networking aspects, we look at both IP and ATM internetworking in order to investigating a few of the most crucial topics/ issues related to the IP and ATM integration perspective. This research would also address various means of internetworking the Internet Protocol (IP) and Asynchronous Transfer Mode (ATM) with an objective of identifying the best possible means of delivering Quality of Service (QoS) requirements for multi-service applications, exploiting the meritorious features that IP and ATM have to offer. Although IP and ATM often have been viewed as competitors, their complementary strengths and limitations from a natural alliance that combines the best aspects of both the technologies. For instance, one limitation of ATM networks has been the relatively large gap between the speed of the network paths and the control operations needed to configure those data paths to meet changing user needs. IP\u27s greatest strength, on the other hand, is the inherent flexibility and its capacity to adapt rapidly to changing conditions. These complementary strengths and limitations make it natural to combine IP with ATM to obtain the best that each has to offer. Over time many models and architectures have evolved for IP/ATM internetworking and they have impacted the fundamental thinking in internetworking IP and ATM. These technologies, architectures, models and implementations will be reviewed in greater detail in addressing possible issues in integrating these architectures s in a multi-service, enterprise network. The objective being to make recommendations as to the best means of interworking the two in exploiting the salient features of one another to provide a faster, reliable, scalable, robust, QoS aware network in the most economical manner. How IP will be carried over ATM when a commercial worldwide ATM network is deployed is not addressed and the details of such a network still remain in a state of flux to specify anything concrete. Our research findings culminated with a strong recommendation that the best model to adopt, in light of the impending integrated service requirements of future multi-service environments, is an ATM core with IP at the edges to realize the best of both technologies in delivering QoS guarantees in a seamless manner to any node in the enterprise

A survey of trends and motivations regarding Communication Service Providers' metro area network implementations

Relevance of research on telecommunications networks is predicated upon the implementations which it explicitly claims or implicitly subsumes. This paper supports researchers through a survey of Communications Service Providers current implementations within the metro area, and trends that are expected to shape the next-generation metro area network. The survey is composed of a quantitative component, complemented by a qualitative component carried out among field experts. Among the several findings, it has been found that service providers with large subscriber base sizes, are less agile in their response to technological change than those with smaller subscriber base sizes: thus, copper media are still an important component in the set of access network technologies. On the other hand, service providers with large subscriber base sizes are strongly committed to deploying distributed access architectures, notably using remote access nodes like remote OLT and remote MAC-PHY. This study also shows that the extent of remote node deployment for multi-access edge computing is about the same as remote node deployment for distributed access architectures, indicating that these two aspects of metro area networks are likely to be co-deployed.Comment: 84 page

Design and provisioning of WDM networks for traffic grooming

Wavelength Division Multiplexing (WDM) is the most viable technique for utilizing the enormous amounts of bandwidth inherently available in optical fibers. However, the bandwidth offered by a single wavelength in WDM networks is on the order of tens of Gigabits per second, while most of the applications\u27 bandwidth requirements are still subwavelength. Therefore, cost-effective design and provisioning of WDM networks require that traffic from different sessions share bandwidth of a single wavelength by employing electronic multiplexing at higher layers. This is known as traffic grooming. Optical networks supporting traffic grooming are usually designed in a way such that the cost of the higher layer equipment used to support a given traffic matrix is reduced. In this thesis, we propose a number of optimal and heuristic solutions for the design and provisioning of optical networks for traffic grooming with an objective of network cost reduction. In doing so, we address several practical issues. Specifically, we address the design and provisioning of WDM networks on unidirectional and bidirectional rings for arbitrary unicast traffic grooming, and on mesh topologies for arbitrary multipoint traffic grooming. In multipoint traffic grooming, we address both multicast and many-to-one traffic grooming problems. We provide a unified frame work for optimal and approximate network dimensioning and channel provisioning for the generic multicast traffic grooming problem, as well as some variants of the problem. For many-to-one traffic grooming we propose optimal as well as heuristic solutions. Optimal formulations which are inherently non-linear are mapped to an optimal linear formulation. In the heuristic solutions, we employ different problem specific search strategies to explore the solution space. We provide a number of experimental results to show the efficacy of our proposed techniques for the traffic grooming problem in WDM networks

Optimization methods for topological design of interconnected ring networks

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1994.Includes bibliographical references (leaves 177-179).by Valery Brodsky.M.S

Telecommunications issues of intelligent database management for ground processing systems in the EOS era

Future NASA earth science missions, including the Earth Observing System (EOS), will be generating vast amounts of data that must be processed and stored at various locations around the world. Here we present a stepwise-refinement of the intelligent database management (IDM) of the distributed active archive center (DAAC - one of seven regionally-located EOSDIS archive sites) architecture, to showcase the telecommunications issues involved. We develop this architecture into a general overall design. We show that the current evolution of protocols is sufficient to support IDM at Gbps rates over large distances. We also show that network design can accommodate a flexible data ingestion storage pipeline and a user extraction and visualization engine, without interference between the two